Top Steel Adjustable Reamer

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

Sabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar

  • 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
  • FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
  • SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
  • JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
  • DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..
Check Stock

HOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

RIDGID 10973 122XL Copper Cutting and Prep Machine, 1/2-inch to 4-inch Pipe Cutting Machine

  • Designed to cut, clean and deburr copper tubing and fittings (Types K, L and M).
  • also cuts and deburrs stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm).
  • Rugged cast aluminum housing and powerful 1/3 HP induction motor for long tool life.
  • convenient carry handle for easy transport.
  • Reamer removes burrs from inside of tubing and brush cleans external surface to prepare for joining.
  • machine also includes accessories to clean inside of fittings and clean burrs from outside surface.
  • Copper pipe cutter has an adjustable handle to accommodate different diameter tubes and a handy built-in 1/2-inch (12 mm) incremental scale for quick and easy measuring.
  • Includes outside diameter cleaning brush, cone reamer, outside diameter deburring disk, fitting brush kit and operator's manual pack.
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock