Top Steel Butt welding Fitting

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

HVDI Stainless Steel Gas Can, Safety Portable Emergency Gasoline Diesel Can Tank, Backup Thickened Tight Sealed Gas Tank with 3 Handles, Vent and Flexible Spout Kit for Vehicles, Cars, Trucks(5Gallon)

  • ✔【304 High-quality Stainless Steel】The gas can is made of high-quality 304 stainless steel with a thickness of 0.9mm. It is resistant to pressure, high temperature, corrosion, and will never rust. Compared with plastic, stainless steel gasoline tanks are not prone to static electricity, and are safer..
  • ✔【Seamless Butt Welding】The gear-shaped stainless steel cover is equipped with a sealing ring to ensure high sealing performance. The tank body adopts seamless butt welding to make it stronger and never leaks..
  • ✔【Portable Flexible Spout Kit】The built-in filter effectively removes impurities, and you can choose either built-in or external oil guide tube, so you don’t have to worry about losing it..
  • ✔【Humanized Design】The gas tank has 3 handles, which support two people to lift. the stainless steel air release valve can balance the internal and external air pressure, and the oil outlet is expanded to 5cm for quick oil output..
  • ✔【Wide Use and Worry-Free Vouchsafing】This gasoline tank is suitable for various liquids such as gasoline, diesel, gasoline, water, etc. If you want higher quality, easier and more comfortable products, please choose us. Customer Satisfaction is our top priority. Please contact us if you need any assista....
Check Stock

.030 Flux Core Welding Wire SONNLER Mig Welding Wire 2Lbs Low Splatter Mild Steel E71T-GS Wire Compatible With HF Fourney Harbor Welder 3 PACK

  • GOOD VALUE FLUX CORE WELDING WIRE SET: This bundle includes 3 PACK flux core welding wires, each pack of welding wire is individually vacuum packed..
  • MAKE WELDING FAST AND EASY: SONNLER welding wire is made of Premium quality AWS E71T-GS mild steel, which helps you easily finish the welding project. Suitable for Great for T-joints, butt welds & lap welds..
  • PROFESSIONAL PACKAGING: Each 2-Pound Spool of SONNLER welding wire is individually vacuum packed, waterproof and moisture-proof, which ensures that the welder receives the best effect of MIG weld wire..
  • EXCELLENT & STABLE PERFORMANCE: When using Sonnler 0.030" flux core welding wire, had great slag coverage great performance on clean metal, and minimal spatter, with almost no cleanup or slag removal. Optimize your welding work. It is absolutely good value for the money..
  • WIDE APPLICATIONS: The gasless flux cored wire is specially designed for MIG welding machines. It is compatible with HF welder Forney welder Lincoln welder. Also suitable for professional welders and beginner welders. TOPSUNCOJIAS.
Check Stock

3 inch Steel Bullet Hinge with Zerk Grease Fitting and Bushing - Weld on for BBQ Smoker Pit Lid Door Tailgate Gate or Fence

  • ✅ 【3 INCH SIZE】3" weld on bullet hinge for BBQ Smoker pit doors and lids, truck tailgates, fences, gates, etc..
  • ✅ 【INCLUDES】Steel with zerk fitting (grease fitting) - Includes Brass Bushing.
  • ✅ 【PREMIUM QUALITY】Heavy duty housing and thick steel center pin.
  • ✅ 【WELD ON】Use 2 or more barrel hinges per application..
  • ✅ 【MULTIPLE USES】BBQ smokers, gates, automotive tailgates, etc..
Check Stock

LTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch

  • LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
  • Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
  • The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
  • No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
  • LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

  • 900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
  • The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
  • Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
  • SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
  • Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.
Check Stock

CTW (4) Trailer Ramp Door Hinges/Weld On / 1' x 10' / Grease Fitting / 9 ga. Steel

  • (4) 10 inch x 1 inch Raw Steel Weld On Trailer Ramp Door Hinges . Integrated Grease Fitting ..
  • Raised Center Portion With Steel Wrap . Center Shank Measures Approx. 3 3/4 inch ..
  • Heavy Duty Steel Hinges for Weld On Applications ..
  • Hinges are 10 inch Long with Raw Steel Finish . 7/16 inch Pin Diameter. 9 Gauge Steel ..
  • Commonly Used For Trailer Ramp Door Hinges ..
Check Stock

0.035 flux core welding wire 3 Spools E71T-GS Low Splatter gasless Carbon Steel Mig Welding Wire Compatible With HF Fourney Harbor Welder 3 PACK

  • MAKE WELDING FAST AND EASY: SONNLER welding wire is made of Premium quality AWS E71T-GS mild steel, which helps you easily finish the welding project. Suitable for Great for T-joints, butt welds & lap welds..
  • PROFESSIONAL PACKAGING: Each 2-Pound Spool of SONNLER welding wire is individually vacuum packed, waterproof and moisture-proof, which ensures that the welder receives the best effect of MIG weld wire..
  • EXCELLENT & STABLE PERFORMANCE: When using Sonnler 0.035" flux core welding wire, had great slag coverage great performance on clean metal, and minimal spatter, with almost no cleanup or slag removal. Optimize your welding work. It is absolutely good value for the money..
  • WIDE APPLICATIONS: The gasless flux cored wire is specially designed for MIG welding machines. It is compatible with HF welder Forney welder Lincoln welder. Also suitable for professional welders and beginner welders..
  • 7*24 SERVICE & PROFESSIONAL TECHNICAL GUIDANCE: If you have any questions, feel free to contact us. We have technical engineers with more than 20 years of work experience, who can help at any time..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to....
Check Stock

Amerex B240 Stored Pressure Water Fire Extinguisher 2.5 gallon for Class A Fires

  • Exclusive crevice-free, butt-welded cylinders.
  • Temperature range from 40° F to 120° F.
Check Stock