Top Steel Cable Railing Kit

Poodle Clipping and Grooming: The International Reference

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, dril....
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock

Muzata 165ft Crystal Vinyl Coated Wire Rope 3/16\ Thru 1/4\ for 3/16\ Cable Railing System Galvanized Steel Cable 7x7 Strand Indoor Outdoor Decking Stair Balustrade DIY WR20 WP1

  • Cable railing kit product of Hong Kong company,it fits for 1/8 inch cable railing system. Made of US AISI standard 316 stainless steel for maximum corrosion resistance, durability and tensile strength.It can be used indoor and outdoor..
  • This cable railing hardware will make your cable railing more beautiful beacuse no need extra screws to install and no need turnbuckle to tension the cable..
  • This left & right hand thread design,It will rotate wire rope to the same direction and tighten the cable , Which also resolves the problem of twisting the wire rope (The fig.3 is key step of installation,It will help your installation easier and more beautiful)..
  • This cable railing kit include 40 pcs left and 40 pcs right thread lag screws ,1 pcs special drill bit ,1 pcs special wrench.
Check Stock

Senmit Cable Railing Post - Stainless Steel Square Fence Post for Deck Cable Railing System, Flat top 36\x 1\x 2\ Level Pre-Drilled, Matte Black

  • 【Create 36” height 1/8 cable railing systems】: Horizontal cable railing systems usually have cables attached to Stainless steel posts. This configuration creates clean lines that practically disappear into the background..
  • 【STRENGTH & ELEGANCE】: Matte black finishing - Pre-drilled holes on adjacent surface with standard 3” distance. Design for invisible cable railing system. Steel post can be installed on steps and staircases for patio, balcony, porch, garden, residential building, commercial office building, hotel, garage etc..
  • 【Made of High Quality 304 Stainless Steel】: High hardness, impact resistance, not easy to deformation. Excellent waterproof and corrosion resistance, strong anti-oxidation ability, durable for long-term exterior deck cable railing..
  • 【Easy to Install & DIY】: A flat top bracket is attached, suitable for flat bottom handrail, stable and simple. The holes on the post are 10.5 mm, Recommended Use Senmit invisible cable railing kit.
  • 【Accessories & Dimensions】: Include ① 1PCS Stainless Steel Posts - 2" × 1” × 35” (Rectangle width × Height).
  • ②1PCS Foot Cover ③4PCS M8 lag screws for wood surface.
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

TooTaci Turnbuckle Wire Tensioner Kit,200ft Stainless Steel Cable Railing Kit,5mm Stainless Steel Wire Rope Vinyl Coated Cable,M6 Hook and Eye Turnbuckle Kit for Clothesline Kit,Hanging Kit

  • 【Cable Railing Kit】--comes with 200ft /5mm Aircraft Cable, 4 × M6 turnbuckle hook and eye, 8× Wire Rope Thimbles,8 × M5 wire rope cable clip, 8× Lag Screw Eye,8× M5 Aluminum Copper Swages (NOTE: Ferrules Size suitable for the 5mm cable (Don't strip off the coating prior to crimping the cables ) )..
  • 【Stainless Steel Aircraft Cable】-- vinyl coated +304 stainless steel wire rope ,7x7 Aircraft Cable, Breaking Strength 1,700 Lbs. This cable bare OD is 1/8"，coated OD is 3/16"；Not suitable for overhead lifting,Is not intended for aircraft use but is designed for industrial ,family and marine applications, suitable for clothes lines ,Tent wire , hanging outdoor lights strings, etc..
  • 【Installation Accessories】M6 Turnbuckle for Cable Tensioner made of stainless steel ,never rust,offers good corrosion resistance and rust resistance.
  • crimping loop sleeve are made of aluminum, hard and sturdy, Turnbuckle perfect for tightening up metal cable, trellis wire,clothes line tensioners,rope tightener,guy wire..
  • 【Application】-- Stainless Steel Turnbuckle and steel cable wire kits Strong and very durable for many uses, Suitable for something that requiring strong cable, such as clothes lines, traction rope, applied as sun shade ,tent hardware kit, ha....
Check Stock

Lulultn Cable Railing Hardware, 30 Pairs Cable Railing Kit,Steel Cable Railing Kit,for 1/8 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Uses: This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for inclined stair railings or horizontal cable guardrails, deck railings and garden fences.
  • Material: The railing kit is made of high quality marine grade T316 stainless steel, which is rust-proof, more durable and beautiful and easy to maintain.
  • Features:Fit for 1/8″ stainless steel cable,This adjustable angle cable railing kit has 180° angle freedom adjustable base, suitable for outdoor or indoor use.
  • Dimensions: 1/8″ inner diameter, ideal for connecting to 1/8 inch stainless steel cable to wood post and metal post.
  • Packaging: 30 Pcs Deck Toggle Turnbuckles, 30 Pcs Deck Toggle Ends and 123 Pcs (3 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod,1 multifunctional small wrench ..
Check Stock

Muzata 10Pairs Cable Railing Kit 1/8 Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180° Adjustable Stairs Deck 10 Cable Lines CK07 NN1,CA4 CA5…

  • Multi-Angled and Wide-Adjustment -- This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The....
  • Clean Look and Durability -- This cable railing hardware has a clean looking. It's made of T316 stainless steel, which has excellent resistance to....
  • Easy to install -- This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable....
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to help you construct a beginner-friendly wood system. It includes 1/8" toggle....
  • Why Choose Us -- MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Muzata PA25 Side Mount Fastening Kit 1/8\ Stainless Steel Weldless for 42\ Cable Railing Side Mount Post PF01 PF02 Tread Reinforced Board Wood Concrete Deck Stairs 2Pack

  • ...tection - This side mount fastening kit is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence.
  • SpaceSaver system - Except for the side mount fastening kit, a complete cable railing system can include posts (PF01 PF02), handrails (Muzata HT10 for flat, HT20 for round, HT30 for thin), cable railing kit CR26, angled washer CR60, 1/8" stainless steel cable WR02, hydraulic crimper cutter set CK12, protector sleeve CR72. Plz check "product description" or download PDF document for more information.
  • MUZATA is a leading cable railing company that provides premium products with favorable ex-factory prices. Over years of industry and product research, MUZATA cable railing system has been proven to be highly dependable and safe against the test of time. Please reach us to get FREE DESIGN Service or After-sales Service: our experts can do all the planning, designing, and estimating without extra charges.
Check Stock