Top Steel Casting Valve Part

COMP Cams 127020 Mutha' Thumpr NSR 234/254 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3-V

  • SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning..
  • 273/306 Advertised Duration, 234/254 Duration @ .050 inch, .450 inch/.450 inch Lift, 109 Lobe Separation.
  • Part #26113-24 valve springs available but not required.
  • Steel retainer part #710-24 and titanium retainer part #702-24 also available.
Check Stock

COMP Cams 26918CS-KIT LS Engine Beehive Valve Spring Kit

  • Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7 degree valve locks, valve seals and spring seats.
Check Stock

ATPEAM Overhead Valve Spring Compressor | Universal Automotive Engine Removal Repair Install Tool

  • The ATPEAM universal overhead valve spring compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many cars, vans, & light trucks.
  • Constructed of quality carbon steel for durability and longevity.
  • strong bearings provided to withstand high force to easily compress springs.
  • coated with zinc and black oxide, this valve compressor tool is resistant to rust and corrosion.
  • Easily remove valve springs in passenger and light commercial vehicles with this valve spring tool.
  • This compression tool works on foreign vehicles, domestic vehicles, and vehicles with dual springs and inner and outer springs.
  • Compressing springs can be difficult and dangerous, but this spring compressor features two different length jaws grips that easily attach to the valve spring for a secure hold on the part.
  • The overhead design allows you to easily attach the valve tool to your valve springs without having to take the cylinder head from the vehicle for quick removal and installation.
  • Package: 1 x Overhead Engine Valve Spring Compressor Tool.
Check Stock

TCP Global 5 Gallon 20 Liters Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid Caster Wheels Regulator Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 5 gallons (20 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds....
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 12.3" inside diameter and is 13"....
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge....
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless....
Check Stock

MaxSen 60mm-245mm Adjustable Center Wall Mount 25\ Height Commercial Kitchen Sink Faucet Brass Mini Pre Rinse Unit with Spray Valve and 8 Inch Add on Spout (M6813-1P)

  • 8 Inch center Brass cartridge commercial faucet with Pull down Sprayer. This faucet features a 5-layers chrome plated casting brass construction that looks great in any setting and is easy to keep clean. The heavier and thicker copper cartridges are better sealed than the ordinary stainless steel cartridges. The mirror-like surface of the faucet makes you live a exquisite life. It is the smart choice to install the faucet on a 2 or 3 utility compartment sink of your restaurant kitchen..
  • Built-in water sealing washer , no need to apply PTFE tape.Easy Install.
  • Comfortable Height of 25'' , with 1.42GPM (5.38LPM) Water Saving Powerful Spray Valve..
  • Ceramic Cartridge with Brass Housing , New Designed "No Screw" Design Spray Valve, Avoiding Latent Leakage Problem Caused by Corroded Screw..
  • 8 inch 304 Stainless steel spout and Pre-rinse sprayer. The faucet comes with a 12 inch long touch spout. With the high pressure sprayer, the sink faucet can easy clean every corner of the commercial sink. The material we used to the swing spout and the sprayer is 0.8mm thickness of 304 heavy duty stainless steel whereas the similar product on the marketplace is made of 0.6mm of stainless steel which seems lighter and thinner. Our faucet is Overall, a price for a qualit....
Check Stock

DK SONIC Ultrasonic Cleaner with Heater,Timer and Basket for Lab Tools, Metal Parts, Carburetor, Fuel Injector, Brass, Auto Parts, Engine Parts, etc (30L, 110V)

  • 40KHz Ultrasonic Frequence for Intensive Rinse: 40KHz ultrasonic frequency can be used to clean stuffs with complicated surfaces, such as blind holes and deep holes etc..
  • SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and that makes the device be resistant to weak acid and weak alkali..
  • User-friendly Control Panel with Simple Mechanical Controllers: The devices are equiped with two simple mechanical industrial controllers which have a long service life and make the devices be operated easily..
  • Always ON or Free time setting among 0~20 minutes: Extensive time-setting range makes the device be freely set to work for any certain time based on the characters of the stuffs to be cleaned..
  • 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F..
Check Stock

DK SONIC Ultrasonic Cleaner with Heater,Timer and Basket for Lab Tools, Metal Parts, Carburetor, Fuel Injector, Brass, Auto Parts, Engine Parts, etc (10L, 110V)

  • 40KHz Ultrasonic Frequence for Intensive Rinse: 40KHz ultrasonic frequency can be used to clean stuffs with complicated surfaces, such as blind holes and deep holes etc..
  • SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and that makes the device be resistant to weak acid and weak alkali..
  • User-friendly Control Panel with Simple Mechanical Controllers: The devices are equiped with two simple mechanical industrial controllers which have a long service life and make the devices be operated easily..
  • Always ON or Free time setting among 0~20 minutes: Extensive time-setting range makes the device be freely set to work for any certain time based on the characters of the stuffs to be cleaned..
  • 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

WOOSTAR 52.4mm Complete Cylinder Head 66mm Valves Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Go Kart Dirt Bike

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

JDMSPEED New Engine Valve Cover With Gaskets Left & Right Side Replacement For Altima Maxima Murano I35 V6 3.5L 2002-2007 Replace# 264-985 264-984 13264-8J113 13264-7Y000 (Set of 2)

  • This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Direct replacement for a proper fit every time. Provides a tight, lasting seal against oil leaks. High quality plastic, steel, or aluminum construction resists warping, cracking and porousness.
  • Package Includes: 2 Engine Valve Covers (LH+RH), 2 Engine Valve Cover Gaskets (LH+RH), 6 Spark Plug Tube Seals.
  • Replace Part Number: Left Valve Cover 13264-7Y010, 13264-8J113, 13264-ZA30A, 264-985.
  • Right Valve Cover 13264-7Y000, 13264-8J102, 264-984.
  • Replacement For Infiniti I35 V6 3.5L (3498cc) 2002-2004.
  • Replacement For Altima V6 3.5L (3498cc) 2002-2006.
  • Replacement For Maxima V6 3.5L (3498cc) 2002-2008.
  • Replacement For Murano V6 3.5L (3498cc) 2003-2007.
  • Replacement For Quest V6 3.5L (3498cc) 2004-2009.
  • Easy and ready for installation. Instruction is not included. Professional installation is recommended.
Check Stock

GM REMANUFACTURED 4.8L 5.3L Cylinder Head 706 Assembly w/Rocker Arms LS LR4 LM7 LM4 NO CORE CHARGE NECESSARY

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock

GM REMANUFACTURED 4.8L 5.3L Cylinder Head 862 Assembly w/Rocker Arms LS LR4 LM7 LM4 NO CORE CHARGE NECESSARY

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock