Top Steel Equal Angles

120 Packs Shelf Pins, 5mm Shelf Support Pegs Spoon Shape Cabinet Furniture Tbestmax

  • 5 mm/ 0.20 inch in diameter and 18 mm/ 0.71 inch in height.
  • Comes with 120 pcs shelf pins in the package..
  • Made of stainless steel, very smooth surface, anti-rust, anti-corrosion, strong and durable for long using life.
  • Used For Shelf holes on cabinets, entertainment centers, bookcases, and more.
  • Warm notice: in order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 5 mm).
Check Stock

5mm Shape Support Pegs Shelf, Pegs Pins for Shelves Shelf Holes on Cabinets. 80 Pieces

  • size: 0.20 inch /5mm diameter, 0.75 inch /19mm with total length..
  • Material: Nickel-plated stainless steel, smooth surface, durable for long using life..
  • Wide Application: Used For Shelf holes on cabinets, bookcases, and more. easy to install by hand..
  • Warm notice: in order to make dowel pins a tight fit, the shelf hole should be equal to or slightly less than or equal to 5 mm. Please make sure the size you need before you buy it..
Check Stock

General Tools 444 Depth/Angle Gage

  • This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
  • The hardened steel base is grooved on both sides to deliver accurate angles.
  • Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
  • The rule can also be used as a depth gage for measuring small holes and slots.
  • Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
  • This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.
Check Stock

uxcell 10 x 100mm(Approx 25/64') Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves

  • 【Size】 Diameter:10mm/0.39" and Tolerance:+0.0008"/-0.0008",Height:100mm/3.93" and Tolerance:+0.02"/-0.02".
  • 【Material】: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life..
  • 【Easy to install】: This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase..
  • 【Application】: Mainly used for wooden products, double bed, bookshelf, shelf, outdoor shade shed, cabinet partition, etc..
  • metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application.
  • 【Notice】: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 10 mm).
Check Stock

HP U28 4K HDR - Computer Monitor for Content Creators with IPS Panel, HDR, and USB-C Port - Wide Screen 28-inch, with Factory Color Calibration and 65w Laptop Docking - (1Z978AA)

  • A CREATOR’S DREAM - Built with an IPS Panel and HDR, this 4k monitor delivers vivid, life-like content and an ultra-broad color range.
  • WIDER ANGLES - Create your sharpest content yet with 178° viewing angles on a 28-inch diagonal screen, bringing more detail into focus.
  • OPTIMIZE CREATIVITY - Experience more freedom in your designs with factory color calibration for accurate and vivid colors you can count on right out of the box.
  • BETTER COLOR GAMUT - Creator-focused color presets to adjust between color spaces for specific types of content, use the Design for Web preset for web creation and switch to Design for Photography for photo editing..
  • MULTIPLE PORTS - Get access to multiple ports including a DisplayPort, HDMI port, three USB 3.0 ports, a headphone jack, and a USB-CⓇ port with 65w of charging to your laptop.
  • ENVIRONMENTALLY CONSCIOUS - Designed with a small carbon footprint, the monitor has been built with enough recycled ocean-bound plastics to equal more than three 16 oz. recycled plastic water bottles.
  • * we go even one step further and package the device in 100% recyclable material**.
  • SPRUCE UP YOUR DESK - Keep your workspace comfortable and clutter-free with full function adjustability and a single USB-CⓇ port for all your devices.
Check Stock

uxcell 10 x 90mm(Approx 25/64') Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves 2Pcs

  • 【Size】 Diameter:10mm/0.39" and Tolerance:+0.0008"/-0.0008".
  • Height:90mm/3.54" and Tolerance:+0.02"/-0.02".
  • 【Material】: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life..
  • 【Easy to install】: This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase..
  • 【Application】: Mainly used for wooden products, double bed, bookshelf, shelf, outdoor shade shed, cabinet partition, etc..
  • metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application.
  • 【Notice】: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 10 mm).
Check Stock

KAMMQI Protractor Adjustable Stainless Angle Finder Protractor for Woodworking angle Measuring Tool with 0-180 Degrees for Carpenters & Woodworking Hobbyists 20 Cm/ 7.8 Inch

  • 【2-in-1 Design】Our woodworking measuring tool is equipped with both length and angle measuring functions, woodworkers measure angles between 0° and 180° according to the use, and draw lines precisely where they are needed. The goniometer scale is clear and accurate and can measure the length (0-20 cm/0-7.8 inches) Whether you draw lines or measure angles, it can meet your work needs at the same time, saving you time and effort..
  • 【Adjustable Protractor Arm】Our protractor is not an ordinary measuring tool. It has a center locator and scribe function. By locking the knurled nut in the desired position, you can quickly and accurately identify angles and draw straight lines for setting miter angles, drawing radial lines, marking and cutting angles for woodworking, or any project that requires angles..
  • 【Durable Metal Construction】High quality stainless steel ensures the longevity of the product, this adjustable woodworking edge ruler body is made of stainless steel and the goniometer dial is made of hard plastic ABS, which has good durability and wear resistance and is not easily deformed. The ruler body is 2mm thick, making it both lightweight and durable. If you are looking for an accurate and sturdy measuring tool for your home, our rou....
Check Stock

BOYA BY-M4C 3 PIN XLR Phantom Power Cardioid Clip-On Lavalier Microphone for Canon Sony Panasonic Camcorders Zoom H4n H5 H6 TASCAM Audio Recorders

  • 【Low Distortion】 Flat frequency response for perfect sound output, retains original voice quality, without making voice sound robotic and....
  • 【Advanced Technology】Made by accurate CNC processing technology, metal mic for super shielding..
  • 【No Batteries Required】Used on +48V Phantom Power. This microphone works with Canon Sony Panasonic Camcorders ZOOM H5 H6 TASCAM Audio Recorders.....
  • 【Durability and Adjustability 】5.9-foot soft silicone wire for comfortable touch feeling and easy to adjust. you can walk around without....
  • 【Omni-directional Xlr Lavalier Microphone】This microphone has equal sensitivity at all angles. This mic will pick up sound from all directions.....
Check Stock

30 Pieces 5mm Shelf Support Pegs Pins Spoon Shape Cabinet Furniture Shelve Support, Nickel Plated

  • Quantity: 30 pcs . Style: Flat spoon . Color : Silver tone ..
  • Size: 5 mm/ 0.20 inch in diameter and 18 mm/ 0.71 inch in height ..
  • Material: Nickel-plated stainless steel , good quality and durable for long using life.
  • Smooth surface without metal burr, comfortable and never hurt your hand. They are very easy to install, you need not use tools, just install or uninstall it by hand ..
  • Wide Application: Especially for cabinet, bookshelf, display cabinet, furniture, wardrobe, closet, cupboard, bookcase, pantry shelving, etc..
  • Warm Notice: In order to make shelf pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 5 mm) ..
Check Stock

Turning Point Propeller 31502112 Express Right Stainless 3-Blade Propeller (14-1/4 X 21)

  • Stainless steel prop made from 15-5 stainless steel, which gets harder and stronger with age.
  • Higher rake angles tighten the vortex produced by the propellers, adding to boat lift and overall performance.
  • Improves handling and boat lift through aggressive rake and cupping.
  • Tuned progressive pitch angles accelerate and channel water to minimize slip and increase performance and fuel economy.
Check Stock

Apipi 100 Pieces Clear Shelf Support Pegs -5 mm Cabinet Shelf Clips,Shelf Holder Pins Bracket Steel Pin for Cabinet Furniture Book Shelves Supplies

  • HIGH QUALITY: Made of steel and clear PVC, which is durable and sturdy, not easy to wear and tear, so it has a long lifespan..
  • UNIQUE DESIGN: These steel shelf support pegs are designed to be clear in color, which makes them hardly noticeable and prevents shelf wobble, it makes the board sturdy enough to keep level and stable.
  • SUITABLE SIZE: The diameter of the peg shaft is about 5 mm, suitable the most shelf holes on cabinets. Mini and portable, easy for you to carry and store..
  • WIDE APPLICATIONS: They are very easy to install by hand, you can use them for cabinets, bookshelf, display cabinets, furniture, wardrobe, closet, cupboard, bookcases, and pantry shelving, meet your daily needs.
  • WARM TIPS: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 5 mm). And small items, please keep away from the kids under 3 years old.
Check Stock

Accusize Industrial Tools 18 Pc Angle Gauge Set 3602-5050

  • Manufactured from stainless steel, satin finished. 18 individual gages for easy use..
  • Eight gaging surfaces per gage. Precision finished edges for accurate checking. Each gage checks primary, 1/2 primary and complementary angles.
  • Quick and accurate inspection of angles and I.D. or O.D. chamfers in or out of the machine. Positioning of lathe tools for chamfers.
  • Inspecting angles on the ground from tools and cutters. Fast set-ups and fixture of workpieces.
  • Eliminates time-consuming measuring set-ups. Indispensable for every inspector, tool maker, machiNist, layout and draftsman.
Check Stock