Top Steel Grooving Bars

THINBIT 3 Pack SGI025D2 0.025\ Width 0.075\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .075" deep. Can also be used for parting stock up to .150"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI040D2 0.040\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI012D2FR 0.012\ Width 0.036\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .036" deep. Can also be used for parting stock up to .072"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI062D2FR 0.062\ Width 0.100\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..
Check Stock

THINBIT 3 Pack SGI029D5E 0.029\ Width 0.087\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel and Stainless Steel Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .087" deep. Can also be used for parting stock up to .174"..
  • TiAlN Coated DURA-MAX 5000 carbide grooving insert for steel, titanium, nickel and stainless steel without interrupted cuts..
Check Stock

Sandvik Coromant CoroCut 1-Edge Carbide Grooving Insert, 90 Degree Offset, GS Geometry, GC1115 Grade, Multi-Layer Coating, 1 Cutting Edge, RG123H1-0200-0002-GS, Right Hand Cutting, 0.079\ Cutting Width, 0.0079\ Corner Radius, H Insert Seat Size (P...

  • Used with the Sandvik Coromant CoroCut 1-2 for external deep grooving in stainless steel.
  • GC1115 grade is a physical vapor deposition (PVD) coating of titanium aluminum nitride (TiAlN) and chromium oxide (Cr2O3) over carbide that provides wear resistance without limiting shock resistance in average-to-good machining conditions.
  • GS chipbreaker has sharp cutting edge for deep grooving at low feed rates.
  • For use with rail-shape clamp toolholders for security.
  • One cutting edge and a right-hand 90-degree offset angle for difficult-to-access grooving areas.
Check Stock

THINBIT 3 Pack LGT040D2RE 0.040\ Width 0.100\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT020D2RE 0.020\ Width 0.060\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .060" deep. Can be used for parting stock up to .120". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

WINSOON Adjustable Floor Guide for Sliding Barn Door, Wall Mount Bottom Hardware System for Closet Bypass Doors TV Stand

  • ... finish, works great to replace the plastic door guide, our sliding door guides mounts to the wall/closet, cause no damage to the floor, help prevent cabinet door from swinging/wobbling..
  • [ CONCEALED BARN STYLE ] - Universal door guides are simple & easy to use, the glide will slide invisibly through any bottom grooving door, avoid accidently kick on your feet/toes, leave no marks on the surface, keep the door clean and safer..
  • [ ADJUSTABLE FIT DOOR THICKNESS ] - WINSOON Barn Door Guide can also act as stay rollers, by create a “U” shaped adjustable channel that accommodate a thicker non- grooving door up to 1-1/2 inch, or grooving door 1-9/16 inch..
  • [ SLEEK DESIGN FLUSH BOTTOM ] - Flat head screws, and countersunk mounting holes ensure a flat contact surface, won’t scratch/stick door, complete flush bottom of the door guides make the installation so easy, also looks very elegant and clean..
  • [ PRODUCT INCLUDES ] - 1 Pcs Floor Guide, 2 Pcs Flat Head Screws (for mounting) + 2 Pcs Adjusting Screws, 2x Ribbed Plastic Anchors, PLEASE CHECK THE MEASUREMENT ON THE PICTURE BEFORE PURCHASING, comes with 5 years product warranty, any proven defects/missing components will get free replacement at first time, 100% satisfaction guaranteed..
Check Stock

TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack

  • ♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool..
  • ♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance..
  • ♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency..
  • ♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces..
  • ♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, PVD Coating Metal Cutting, 10pcs

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 3.3mm, Thickness(S): 4.8mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

Gtn-2 Tin Coated Carbide Inserts - 10pcs SP200 for SPB26-2 SPB32-2 Blade Grooving Slotting Tool Cut Off Plate Tool

  • ✅Package Included - 10PCS gtn-2 carbide insert.
  • ✅Premium Quality - SP200 gold grooving cut-off insert material is carbide, with strong impact resistance, high precision, high finish and high wear resistance.
  • ✅Features - Low cutting resistance and stable life, minimum R angle to reduce burrs.
  • ✅Application - grooving cut off blade suitable for processing steel parts.
  • ✅After-Sales Service - If you are not satisfied with the product for any reason, order replacement or order return or order refund is guarantee.
Check Stock