Top Steel I Beams

SELEWARE Heavy Duty Steel Beam Clamp, Heavy Bag Mount, Punching Bag Hanger Heavy Duty Holder for Boxing, Muay Thai and MMA Training, 360° Swivel Hardware, W/Carabiner

  • SAFE PUNCHING BAG HANGER: We attach great importance to the safety our products. The i-beam hanger clamps the beam tightly without bending deformation..
  • STRONG HEAVY BAG MOUNT: This heavy bag hanger set could hold up to 700lbs..
  • SWIVEL HARDWARE: Package includes 360-degree swivel bearing and carabiner, help to lessen the stress on the hanger and add extra support. The swivel chain can turn side to side without getting tangled up..
  • ADJUSTABLE I-BEAM HANGER: Adjust FROM 3.7” TO 6.7” to fit to I-beams of different width..
  • EASY INSTALLATION: No drilling needs and efforts to your beams, quite easy and convenient installation..
Check Stock

ADJ Products Portable Truss with 2 T-Bars LTS-50T

  • 100% portable trussing system Easy set up and high stability features 2 black Steel tri-pods which extend up to 9 ft. 2 added T-Bars on top to hang....
  • Two 5 ft. Truss I-beams that fit together to create a 10 ft. Trussing span ideal for mobile DJs and bands.
  • Includes locking pins and hardware system capacity: 200 lbs. (Evenly distributed).
Check Stock

Air King 9318 Industrial Grade High Velocity Multi Mount Fan 18-Inch,Black

  • Air circulation: 18-inch blades provide comfortable air flow, while the pivoting head allows you to direct air where you need it.
  • Multi-mount: Slim mount can be installed on walls, I-beams, and more with ease, making it ideal for any industrial setting.
  • Powerful: 3-speed, 1/6 HP, 120V, 1 phase, enclosed, ball bearing, permanently lubricated split-capacitor motor.
  • Durable: Three powder-coated steel blades protected by a powder-coated steel grill and mount.
  • Air movement: Circulates at 3190/2970/2660 high/medium/low CFM, RPMs at 1500/1300/1100, amps at 1.5/1.3/1.0 and watts at 180/150/125.
Check Stock

Dolibest Set of 2 Permanent Antirust Stainless Steel 304 Heavy Duty Swing Hangers, 1800LB Capacity, Wood and Steel Beam Yoga Hammock Chair Punching Bag Porch Swing Sets,180° Swing, 7.67‘’

  • Special innovative design: wooden or steel beam frame can support 180° swing back and forth, which can be more flexible and widely used, and can hang any other heavy objects on the overhead mounting frame..
  • Easy to install: Pre-drill a hole in the steel or wooden beam (using a 0.32 inch drill bit size). When installing it on wood, put two tightening nuts and washers on the top and tighten them. When installing on a steel beam, put a nut and washer on the top of the beam, and tighten the other side on the beam. All installation hardware is included to facilitate quick installation..
  • High Quality: All parts are made of high quality 304 stainless steel materials. No rust, strong enough corrosion resistance and high hardness to ensure safe and environmentally friendly use, non-toxic and no odor. 1500 LB capacity..
  • Wide range of application: suitable for indoor and outdoor, suitable for wooden beams and I-beams. The best anchoring solution for all suspension straps and resistance trainers, hammock swing kits, Olympic rings, battle ropes, yoga swings, boxing equipment..
  • Customer Service: Recommended for Ages 12+.Customer satisfaction and satisfaction is the top priority of our business. If you have any questions, please feel free to contact us, we will provid....
Check Stock

Air King 9518 18-Inch Industrial Grade Wall Mount Fan 1/6-Horsepower,Black

  • Air circulation: 18-inch blades provide comfortable air flow while the pivoting head allows you to direct air where you need it the most.
  • Multi-mount: Slim mount can be installed on walls, I-beams, and more with ease, making this fan ideal for any industrial setting.
  • Powerful: 3-speed, 1/6 HP, 120V, 1-phase, enclosed, ball bearing, permanently lubricated split-capacitor motor.
  • Durable: Three powder-coated steel blades protected by a powder-coated steel grill and mount.
  • Air movement: Circulates at 3190/2970/2660 high/medium/low CFM, RPMs at 1500/1300/1100, amps at 1.5/1.3/1.0 and watts at 180/150/125.
Check Stock

Acemaker Electric Hoist Trolley I-Beam Trolley for PA600 to PA1000 Electric Hoist 2.68in - 4.33in Adjustable Flange Manual Trolley Rollers Overhead Garage Hoist System 2204lbs Red

  • 【2204LBS LOAD CAPACITY】This I-beam trolley provides up to 1 ton / 2204 lbs loading capacity. It is constructed with thickened manganese steel and finished with a powder coating that makes it strong, wear-resistant, and durable, providing exceptional impact resistance and ensuring long-term reliability. The electric hoist trolley is equipped with anti-loose side-locking nuts that guarantee safe and secure use..
  • 【FIT PA600-PA1000 ELECTRIC HOISTS】The I-beam trolley will fit perfectly for a 1320lbs to 2200lbs electric hoist, including the PA600, PA700, PA800, PA900, and PA1000 models, making it a versatile and reliable addition to your lifting equipment arsenal..
  • 【SUITABLE FOR 2.68-4.33'' I-BEAM】 The Acemaker beam trolley is designed to fit I-beams ranging from 2.68-4.33in (68-110mm). The package includes 6 casing washers that are 1.18in/30mm wide and 10 flat washers. You have the flexibility to modify the number of flanges to accommodate your specific beam requirements..
  • 【STABLE & SMOOTH OPERATION】This I-beam trolley for electric hoists features 4 large heavy-duty steel wheels and one side balancing bearing to ensure the hoist can smoothly move on the beam even under heavy loads, offering more stability for safe use..
Check Stock

XMYANG Heavy Punching Bag Strap - Heavy Duty Boxing Bag Hanger Strap Mount - Heavy Bag Hanging Strap

  • Made of durable Polyester material, Support heavy bags up to 1000lbs..
  • This heavy bag strap can be adjustment the length from 18in to 70in Very convenient to use..
  • Easy to install it on wooden beams, I-beams, ceiling joists, tree, etc..
  • Great for any heavy Bag,boxing bag, Muay Thai Bag, kids punching bag, etc..
  • Perfect for reducing heavy bag noise while hitting the bag..
Check Stock

PRO Mountings - I Beam Heavy Bag Hanger (IB-1100) | Adjustable Between 4" to 5.75" I Beams | Professional Grade Steel Bag Hanger with Steel Mounting Hardware | Home & Commercial Gym Ready

  • ✅ FAST INSTALL - Support heavy bags, speed bags and punching bags of up to 250 pounds with just a few minutes of setup. The sturdy steel mount screws directly around I beams that measure between 4 inches wide up to 6 inches wide. All mounting hardware is included for easy setup right out of the box!.
  • TOUGH & DURABLE - Each mount is made from 3/16" powder coated steel to resist tarnish and avoid wear and tear without damaging your I beam, rafters or ceilings. Our I beam mount is used in commercial and home gyms and is excellent for gymnastic setups including rings and suspension trainers..
  • ✅ MADE IN THE USA - Each mounting system is made from heavy duty powder coated steel that will withstand years of beatings by adults or kids. We are the top heavy bag mountings company used by professional boxers, world class gyms and MMA stars. Now you can enjoy pro quality mountings in your home!.
  • UNIVERSAL COMPATIBILITY - Our hangers are designed to work seamlessly with all the top heavy bag, speed bag, banana bag, aqua bags, Muay Thai bags and other punching bags on the market today. Our mounting products and kits are also....
Check Stock

Beam Trolley with 5-Foot Enclosed Conveyor Track - 250-Pound Load Capacity per Trolley

  • Rugged cast iron body construction I-beam trolley -- Industrial grade.
  • Made in the USA by Jervis B Webb, the "gold standard" for heavy duty conveyor components.
  • Side guide rollers ensure trolley glides smoothly, can traverse curves and prevent unnecessary wear on track.
  • Designed to withstand oven rated temperatures of 450 degrees Fahrenheit..
  • Adapts to 3" and 4" tall I-beams (measure from top flange to bottom flange).
Check Stock

foriy 2 Ton /4400 LBS Heavy Duty Manual Trolley Capacity Plain Dual Wheels Push Beam Trolley Track Roller Crane Lift Garage Hoist Adjustable 3.7 -4.9 I-Beam Width for Straight Curved I-Beam

  • ...ing can be adjusted to adapt to different types of I-beams, and the width can be adjusted by removing the washer. The roller shaft is equipped with roller bearings, with high transmission rate and small hand pull, and can be driven on a small return radius..
  • 【Sturdy and Durable】 This trolley is made of manganese steel steel plate shell, the surface is sprayed with plastic, it is not easy to rust, and the center axis is thickened, and the bearing capacity is strong. Very strong and durable..
  • 【Compact Structure】The trolley has compact structure, small installation size, high temperature quenching gear, alloy steel forging, high-strength bearing, thickened lifting ring, good anti-collision effect and long service life..
  • 【Wide Range of Applicable Scenarios】 The trolley is widely used in factories, mines, docks, warehouses, construction sites, etc., especially for equipment maintenance work in places without power supply..
Check Stock

Heavy Duty 1,000 Pounds Capacity Beam Trolley with Side Guide Rollers

  • Suits 3 inch, 4 inch, and 6 inch tall I-Beams (measure top of flange to bottom of flange). 1,000-pound load capacity..
  • Industrial grade I-Beam Trolley as used in automotive assembly plants. Rugged Cast Iron body construction..
  • Comes with load carrying hook plate attachment, and side guide rollers to help the trolley glide smoothly, traverse corners and prevent unnecessary wear on track..
  • Safety lug in casting adds additional safety.
  • Adjustable to fit various flange widths. Compatible flange widths: 2.330 inches to 3.330 inches.
Check Stock

Set of 2 Industrial 304 Stainless Steel H Groove Sliding Wheel Roller Track Rail Rigid Caster Wheel Pulley Bearings,Sliding Door Roller,for Square Tube/I-Rail,Mechanical Cart (2.7inch/68cm)

  • ?Material: 304 stainless steel H-shaped sheave with good corrosion resistance, heat resistance, low temperature strength and high mechanical properties. The sturdy structure and gasket are very strong..
  • ?Features: thick steel plate bracket, high bearing capacity, good toughness, good wear resistance and good chemical stability. Smooth surface, double carbon steel ball bearings reduce vibration and noise..
  • ? Strong carrying capacity: heavy caster design. The maximum load per wheel is 500KG / 1102 lbs..
  • ?Easy to use: It can reduce friction with the wheel, and it is more stable and flexible, and has excellent maneuverability..
  • ? Wide range of uses: H-shaped sheaves are suitable for square tubes, I-beams, door frames, movable doors, fitness equipment, electric/rolling doors, industrial machinery, containers, shelves and other equipment and engineering..
Check Stock