Top Steel Manifold

35mm/38mm 8 PSI External Turbo Exhaust Manifold Wastegate Black

  • ▶️ High Strength Cast Steel Body / Anodized Top Finish.
  • ▶️ Fits any 38mm Turbo Manifold Wastegate Port.
  • ▶️ Weldable Flanges for Dump Pipe / Manifold.
  • ▶️ Easy to Change Springs with V-Band Clamped Top / Adjustable Top Screw.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

Exhaust Headers,304 Stainless Steel Polished Finish Performance Exhaust Manifold Compatible for 84-91 GMT C/K 5.0/5.7

  • 【Compatible】Fits for Chevy 283/302/305/307/327/350/400. (Please select a suitable model before purchasing)..
  • 【Make Driving Safer】Most of the enclosures and stainless steel pipe connections are equipped with reinforced pull tabs, which greatly alleviate the bumpy force of the exhaust manifold during driving, increase driving safety, and prolong the service life of the exhaust manifold..
  • 【Quality materials】Exhaust Headers made from high-strength steel, heavy duty tubes and collectors.High-quality welding for superior stability..
  • 【Production Process】All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting..
  • 【Great Service】All products come with US stock, Fedex or USPS fast shipping.The responsible seller provides you with a 365-day warranty and friendly 24/7 customer service..
Check Stock

Dorman 03114 Front Exhaust Flange Hardware Compatible with Select Subaru Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

EFIELD Pex Manifold 3 Outlets Poly PPSU Barb Crimp Closed 3/4 Trunk 1/2 Port 3 Ports F2159

  • Directly from One of the Biggest Plumbing Systems Manufacturers.
  • 1 Piece Closed Manifold: 3/4 Trunk, 1/2" Port (3 Ports) Poly PPSU Barb Crimp Pex Fittings, Lead Free.
  • This Efield Product Suits with all Types and Brands of Pex Tubing.
  • Made of Poly(PPSU), Better Performance than Brass Manifold in RO, Chlorinated Water Application.
  • Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
  • ASTM F2159 NSF/ANSI 61 NSF 372 Certified.
Check Stock

Fear

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Fieldpiece SM380V SMAN manifolds, Black

  • Toughest, most advanced digital refrigerant manifold on the market.
Check Stock

Fieldpiece Job Link

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock