Top Steel Manufacturers

Round Hot Rolled Steel Plate 1/4\ x 4\ Diameter Circle (Pack of 2!)

  • 【BEST CHOICE FOR YOUR KNIFE】We provide you 1095 steel flat stock, the most perfect knife making steel, selected by lots of famous knife manufacturers. The super toughness and grinding degree make it very suitable for your handmade DIY knives..
  • 【COLD ROLLED & ANNEALED】We have annealed the high carbon steel to improve its machinability. You can easily process your knife steel that has good machinability, saving your time and abrasive belts..
  • 【SPECIFICATIONS】Each package contains four 1095 Steel Bar Stock, all of which has a size of 1.5" x 12" x 0.12". There are enough knife making steel for you. Create your own custom knife that will last a lifetime..
  • 【PERFECT PACKAGING】We use three layers of rust-proof packaging for 1095 steel flat stock: rust-proof oil, rust-proof paper, and bubble bags to prevent your knife making steel from rusting or being damaged..
  • 【WORRY FREE】If you are not satisfied with our 1095 steel flat stock, we will provide you a full refund or free replacement!.
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

HarborCraft 1/4inch by 3 Foot Stainless Steel Chain

  • Made of rust and corrosion resistant 304 stainless steel proof coil chain for use in a variety of applications including security, padlocks, safety tow chain, tie downs, etc..
  • Chain has a minimum break load of 5,200 pounds and is suitable as Class II and III safety tow chain.
  • Inside length of links is 1.24inches inside width of links is 0.38inches.
  • Chain is manufactured to exacting National Association of Chain Manufacturers (NACM) specifications.
  • 1/4inches by 3 foot long stainless steel chain.
Check Stock

Prime-Line B 638 Screen Door Tension Spring with Roller, 1 inch Nylon, Metal Ind. (2-pack)

  • Used by Academy and other sliding screen door manufacturers.
  • 1-3/4 in. tension spring with an off-set bend.
  • Steel spring with high-density polyethylene roller.
  • For stainless steel roller use Prime-Line part B 756.
Check Stock

Super Angel PREMIUM DELUXE Living Juice Extractor - Stainless Steel Wheatgrass Juicer - Superangel

  • Stainless steel juicer – Augers and juice housing made with 316 surgical grade steel.
  • High Yield – 20 to 30% more juice than other juicers – Easy cleanup – Dishwasher safe.
  • 3 HP – 86 RPM – 3 Stage Screen System – Quiet Operation – 10 Year Manufacturers Warranty.
  • Upgraded anti jamming, auto reverse, internal cooling system, thermal sensor & main board.
  • Includes base, augers, extraction housing, splash guard, cleaning brushs, scraper, tampers, pulp collector, extra fuse, instructions & recipe booklet.
Check Stock

700 LB x 0.2 LB 44 x 22 Inch Extra Large Platform Vet Veterinary Animal Livestock Dog Goat Calf Pig Sheep 4H Digital Scale NEW

  • 2 year manufacturers warranty. Heavy Duty Stainless Steel Platform, Steel Base.
  • 3500 divisions. 2 million internal software resolution. 21 bit AD processor..
  • 44 x 22 Inch Stainless Steel platform, includes removable rubber mat..
  • Hold function. Auto off & backlight (both selectable). RS232 Printer/Computer port on indicator..
  • A/C adapter (included) or 6 AA batteries (not included)..
Check Stock

(All in One) EFIELD 1/2 Inch Pex-b Pipe, Fitting, Clamp Tool, Clamps Cutter Combo Kit

  • Directly from One of the Biggest Pex Systems Manufacturers.
  • Pex Crimp Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
  • Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps and Steel Made Pipe Cutter.
  • Heavy-Duty Canvas Bag for Carrying and Storage Fitting and Tools.
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

Farberware Classic Series Stainless Steel 2.75-Quart Covered Sauté Pan

  • “Full Cap” Base Advantage – Now a stainless steel protector surrounds a thicker aluminum core for easy maintenance and better heat distribution. Since the entire surface is stainless steel, cleanup is easier. Enjoy a lifetime of beauty.
  • Close fitting lids create a self-basting feature that protects the food’s taste and nutrients. A classically styled phenolic handle is oven safe up to 350°F / 180°C.
  • Durable stainless steel construction – dishwasher safe.
  • Thicker, rolled pan rims for extra durability, enhanced drip-free pouring and easy handling.
  • According to the Cookware Manufacturers Association (CMA) Engineering Standards: 2.1.3 Tolerances – Manufacturing Tolerances are allowable as follows: Dimensional= +/- 1/4″ (Top Outside Dimensions) Capacity= +/- 5% (of Total Volume).
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock