Top Steel Pipe Tee

John Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity

  • This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
  • Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
  • Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
  • T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
  • This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.
Check Stock

Big Dipper W-250-IS - 25 GPM Stainless Steel Automatic Grease Removal Unit

  • ...Upgraded Grease Trap】 Tee filter pipe design highly improves the filtering effect that oil floats on the surface, and the water flows from the bottom of the pipe to the next section. Special valve design for drain out all water, easy for you to clean the water tank. Made of heavy-duty 1.0 mm thickness stainless steel, which is strong and durable, anti-corrosion, not easily deformed. The double-layer edging process makes the edge feel more comfortable and will not cut your hands..
  • 【Working Principle】 Wastewater flows into the grease trap from the sink, the fats, oils, and grease will rise to the surface and be collected between the baffles. The water will sink and flow into next section from the bottom of the tee filter pipe. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • 【Easy To Assemble】 Connect the pipe of the sinks and dishwasher to the Grease Trap inlet. Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school, or small sink or dishwasher applications..
  • 【Precautions】 1. This product is suitable for the treatment of oily water of mineral oil, animal oil, vegetable o....
Check Stock

Spears Manufacturing 2 Aftermarket Tee Replacement for Hayward Salt System Flow Switch Tee Only

  • Salt System Flow Switch Pipe Tee Replacement - Pipe Tee ONLY.
  • PVC Tee designed to fit within 2" plumbing, with a 1/2" threaded opening for the Flow Switch to be threaded into..
  • Compatible with Hayward Salt Chlorine Generators.
  • SCH40 Reducing Tee Slip x Slip x FPT, Dimensions: 2" x 2" x 0.50".
Check Stock

Gonex Baseball Batting Tee for Women & Men Travel Tee Ball Tripod for Baseball Practice Training Aid, Softball T-Ball Hitting Tee for Youth & Adult, Collapsible Portable, with Carrying Bag

  • 【Stable Tripod Stand】: Gonex baseball batting tee’s tripod stand can extend up to 600 mm. It has a UNIQUE LENGTH and A FIRM BASE to ensure that the baseball tee don't move or fall down when you hit it. The 3.8 pound weight and 1.1mm thick steel also give the batting tee extra stability. You can adjust to the base and increase the contact area between the base and the ground to maintain the stability. Please using the batting tee correctly and DON'T hit the base of the product intentionally..
  • 【Adjustable Height】: 2-Postion Height Adjustments ensure that the height of the baseball tee can vary from 27 to 44 inches to accommodate players of all heights. It is the best training aid for you or your children to practice with, helping you develop an interest in training and play from beginner to professional in a short period of time..
  • 【Quick Clip】: Gonex baseball tee has UNIQUE QUICK CLIPS that are very convenient and easy to install or adjust. Compared with similar products, it has a mini screw that will tighten the contact between the lock and the pipe, preventing the pipe from slipping after long-time use. All the accessories of the product are separable and can be purchased in our store. So you don’t need to worry that the baseball tee wi....
Check Stock

Optimum Pool Technologies 2 Pipe Tee & 2 Unions Nut & Tailpiece Plumbing Kit for Hayward Goldline Salt System

  • Kit includes (1) Pipe Tee and (2) Salt Cell Union, Nut and Tailpiece..
  • Pipe Tee Replaces Hayward Part No GLX-FLO-T. Unions Replace Hayward Part No GLX-CELL-UNIOn..
  • Heavy Duty PVC parts used for the installation of various Hayward/Goldline Salt systems into standard 2" Pool Plumbing..
  • Manufactured by Optimum Pool Technologies, made in USA.
  • Pipe Tee includes 1/2" threaded opening for the Flow Switch (GLXFLORP) for your Hayward Goldline Salt System. FLOW SWITCH NOT INCLUDED..
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Home TZH Pipe Fitting, 30 Pack 1\ Grey Floor Flange/Elbow/Tee Combo for Industrial vintage style, Flanges/Elbow/Tee with Threaded Hole for DIY Project/Furniture/Shelving Decoration (30, 1\)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 30 Packs(10 Flange,10 Elbow and 10 Tee) for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow/tee/pipe flange are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will brin....
Check Stock

Brooklyn Pipe 1/2\ Inch Elbow Tee Combo Pack (10 Elbows, 10 Tees) Threaded Pipe, 90 Degree Pipe Elbow Tee | Decorative Iron Piping, Metal Cast Pipe Fittings For DIY Furniture Projects

  • 1/2" INCH ELBOW TEE COMBO PACK - Our Brooklyn Pipe malleable iron threaded elbow / tee combo pack provides you with great pipe fittings at a very affordable price.
  • PERFECT FOR DIY - Whether you're looking to build a pipe shelf, pipe towel rack, pipe lamp, our 1/2 value pack of tees and elbows is up to the task. These fittings are for decor and DIY projects only..
  • RAW IRON - Malleable iron is raw, unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron it's normal for your hands to get dirty. You've probably seen iron workers in movies, they don't come home clean!.
  • QUALITY CONTROL - We inspect and pack each pipe fitting we sell. If it doesn't look right, feel right or if there are any issues, we return them to our supplier. We offer a LIFETIME warranty on our products, just give us a call or send an e-mail..
  • SUPPORT USA BUSINESSES - Brooklyn Pipe is a family owned business in the USA. We are available via e-mail or our cell phone to help answer any questions you have. Please help support small American businesses!.
Check Stock

Brooklyn Pipe 3/4 Inch Elbow Tee Combo Pack (10 Elbows, 10 Tees) Threaded Pipe, 90 Degree Pipe Elbow Tee Decorative Iron Piping, Metal Cast Pipe Fittings For DIY Furniture Projects

  • 3/4" INCH ELBOW TEE COMBO PACK - Our Brooklyn Pipe malleable iron threaded elbow / tee combo pack provides you with great pipe fittings at a very affordable price.
  • PERFECT FOR DIY - Whether you're looking to build a pipe shelf, pipe towel rack, pipe lamp, our 3/4 value pack of tees and elbows is up to the task. These fittings are for decor and DIY projects only..
  • RAW IRON - Malleable iron is raw, unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron it's normal for your hands to get dirty. You've probably seen iron workers in movies, they don't come home clean!.
  • QUALITY CONTROL - We inspect and pack each pipe fitting we sell. If it doesn't look right, feel right or if there are any issues, we return them to our supplier. We offer a LIFETIME warranty on our products, just give us a call or send an e-mail..
  • SUPPORT USA BUSINESSES - Brooklyn Pipe is a family owned business in the USA. We are available via e-mail or our cell phone to help answer any questions you have. Please help support small American businesses!.
Check Stock

1/2 Inch Side Outlet Tee (4-Way) Industrial Cast Iron Pipe Fitting 8 Pack by Pipe Decor, Pipe Components For Building Tables, Chairs, Shelving, and Custom Furniture, Fits Half Inch Pipes, Eight Pack

  • 1/2" INCH SIDE OUTLET TEE 8 PACK: Our Pipe Decor cast iron side outlet tee (4-way) 8 pack provides you with high quality pipe fittings at a great price. Each piece is threaded to fit 1/2" pipe and are sure to tie your rustic creation together..
  • AUTHENTIC INDUSTRIAL PIPE FITTINGS: These are genuine industrial pipe fittings that will stand the test of time. You will know Pipe Décor parts and accessories when you hold them. Beauty and beast. Strength and style. This is real industrial pipe for your decoration and designs. Accept no substitutes. Extra pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired..
  • CREATE CUSTOM PIPE FIXTURES AND FURNISHINGS: Create a one of a kind shelf, table, lamp, or a piece of art that perfectly fits your space. Iron pipe and pipe fittings complement a variety of looks and aesthetics, including: steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, modern, and water piping. Build something that speaks to you..
  • CLEANING AND SEALING: Since these are unfinished cast iron components, we highly recommend that you clean and seal each piece to ensure that they stay rust-free. Each fitting is ....
Check Stock

Shasta Vent 'Thru-The-Wall Kit' for Class A, All Fuel, Double Wall, Insulated, SS Shasta Vent 6' Chimney Systems

  • This Thu-The-Wall Kit includes the component parts needed for the typical through the wall.
  • Installation, including a Tee with Cap, Tee Support, Wall thimble with Finishing Collar, 8" Pipe.
  • section, two Wall Brackets, and a Chimney Cap. Just add pipe, and you should have a complete.
Check Stock