Top Steel Rail Fence

Prescott Plastics 3/8 Inch White Round Vinyl Rubber Cap, FDA Food Grade, Flexible Pipe Post Cover (10)

  • HOW TO FIT: Fits 3/8" OD round tube or pipe (*OUTSIDE diameter) & can stretch for a snug fit without tearing or splitting. 1/2" tall / deep to provide a secure fit..
  • EASY TO INSTALL: Our 3/8" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
  • PROTECTION: .375 inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project.
  • PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • MADE IN USA: These Plastic Plugs are specially designed and produced in USA to maintain quality, endurance and durability..
Check Stock

Wixey WR700 1500mm/ 60 Digital Saw Fence Readout

  • Simple mounting brackets easily attach to almost any rectangular rail or round rail fence.
  • Large easy to read display reads in inches with fractions or millimeters.
  • Mounts on the left or right side of the fence.
  • Magnetic attachment allows the fence to be removed and maintain calibration.
Check Stock

Delta, 36-T30T3, 30 in. DELTA® T3 Fence System & POWERTEC 71007 110 V to 220V Paddle Switch for Power Tools fits Table Saw, Router Table, Drill Press, Bench Saw, Band Saw

  • Product 1: One piece square tubular rail. Max Rip to Left of Blade-13-1/2 inch. Length: Fence 37 inch, Rail 57-1/2 inch.
  • Product 1: Mounting design attaches to Delta table saws including Contractor Saw , Hybrid Saw , and Unisaw models.
  • Product 1: Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0. 4mm).
  • Product 1: Easy-gliding, steel tube fence body to handle Quick, precision ripping, and square cuts.
  • Product 2: Rated current: 2 HP/35 amps at 120V.
  • Product 2: Approved according to UL508 E195428.
  • Product 2: Large paddle for emergency stop.
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

America's Fence Store 1-5/8' x 1-3/8' End Rail Clamps 5 Pack

  • Made from high-quality and durable galvanized pressed steel that is rust-resistant.
  • Comes with 5/16 x 2" carriage bolts and nuts.
  • These end rail clamps are a great way to connect two posts or rails together when building or repairing a chain link fence.
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

Extend-An-Arm Barbed Wire / Barbwire Arm Extensions for Chain Link Fence - Set of 9 1-3/8"

  • Designed to fit 1 3/8" chain link fence top rail.
  • Made from durable and sturdy pressed steel that has been galvanized to prevent rusting and be long-lasting.
  • Ideal solution for adding needed height to a chain link fence without all the headache.
Check Stock

Plum Fittings 3 1/4\ T-Rail Stair Handrail Vinyl Bracket Kit | Vinyl Fence Brackets | Screws Included | White

  • The one-stop kit for repairing or installing a vinyl fence railing.
  • This vinyl handrail bracket kit comes with all the hardware you will need, making it an easy installation.
  • Made from durable and high-quality white vinyl that will not fade, warp, or discolor over time.
  • The handrail bracket outer dimension is 3.731" x 5.000" and the t-rail dimensions are 3 1/4" x 3 1/4".
  • With this purchase you will receive: (1) T-Rail Stair Bracket Top, (1) T-Rail Stair Bracket Bottom, (12) #10 x 1-1/2" Phillips Pan Head Stainless Steel Screws, (12) PVC Screw Hole Plugs, (4) Self Drilling Screws and Caps, (1) Instruction Sheet.
Check Stock

HowRU Iron Art Hanging Baskets Flower Pot Holder Over The Rail Metal Fence Planters Assemble - Pack of 3 (Black)

  • 3 Pack for sale,hanging plant stand adds a decorative touch, and creates a sturdy support for your potted plants..
  • The sturdy steel construction will last for years, and the color will enhance your plants..
  • Thickened entire flower pot holder, strengthen the bearing weight capacity, more durable than the ordinary fence flower pot hangers, not easy to be bent or broken.
  • pot hook width: 2.5 inches, we suggest you measure your fence, rail before you purchase.
Check Stock

Extend-A-Post - Extensions for Chain Link Fence - Set of 9 (1-3/8")

  • Set of 9 extension posts for chain link fences sized 1 3/8".
  • Extend your existing chain link fence without removal/reinstallation of top rail.
  • Adjustable to Extend fence at any angle from vertical to 90 degrees.
  • These 1 3/8" fence extension posts help prevent pets from climbing / escaping fence.
  • Use to built cat pens / stop dogs from jumping fence key product features.
Check Stock

Woodhaven 3010 Rail Kit

  • Our Rail Kit eliminates you having to make your own wood rails for any of our Planing Sleds, not included..
  • Easy to set up and use. Multiple Rail Kits can be connected together to cover any length part. The Rail Kit is 48” long. Includes two MDF Fence &....
  • Stock length capacity is 12” -16” less (depends on width of stock) than the combined overall length of the Rail Kits..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

8FT 10FT 12FT 14FT Trampoline with Enclosure Net Outdoor Jump Rectangle Trampoline - ASTM Approved-Combo Bounce Exercise Trampoline PVC Spring Cover Padding for Kids and Adults (Blue, 12FT)

  • 【ASTM Safety Certified】: Safety always is top priority,Our kid trampoline is made up of high quality stainless steel and various accessories. The trampoline have been tested and approved with ASTM F381, ASTM F2225-15（R2020）Standard Safety Specifications.You can ensure that our trampoline is safe for your family. Let you and your kids play safely on the trampoline..
  • 【Safety Protection Portfolio】The safety protection combination is around the trampoline. It is a safety fence made of high strength nylon. The safety fence combines with steel pipe perfectly and connects the fence with spring cover. This also eliminates the gap between the jumping mat and the fence, making the exercise trampoline a whole, to ensure that children can safely and happily play in the kid trampoline.trampoline for kids exercise trampoline workout trampoline.
  • 【High Elasticity Heavy Jumping Pad】Our trampoline is wrapped in 60 high-tension steel springs(8FT 48pcs / 12FT 72pcs/14FT 72pcs) , providing a very strong elasticity for the exercise trampoline, when children play in our kid trampoline, they can jump higher.trampoline exercise trampoline kids trampoline.
Check Stock