Top Steel Structural

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Lenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Vari-raker tooth set for general-purpose cutting applications.
Check Stock

Lenox - 93328RPB72360 RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 5-8 TPI

  • RX+ tooth design reduces strippage at high feed rates.
  • Bimetal for cutting carbon steel and structural steel.
  • Good for cuts in tubular shapes, structural shapes, and tubular bundles.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
  • Made of M-42 high-speed steel for heat and wear resistance.
Check Stock

String Swing Drum Stick Holder - Stagehand Drumstick Container Bag Holds up to 8 Pairs of Zildjian Vic Firth ARLX and Vater Drumsticks - Two Clamps Attach Securely to Microphone & Cymbal Pole

  • ✔ DRUMSTICK HOLDER FOR A LIFETIME - Fits any Drum Set, even electronic or electric drums.
  • Made in the USA and backed by a LIFETIME STRUCTURAL WARRANTY,maximum structural integrity and safety.
  • So your drumsticks will always be ready for you.
  • ✔NON-SKID PADDING - Durable black powder coated Heavy Duty steel with Non-Skid padding can quickly be attached using only one hand and fits all mic, music, or cymbal stands, ranging from ½-1 inch in diameter – A great Drummer Gift.
  • ✔VERSATILE & AFFORDABLE DRUMS ACCESSORY – Universal Mount clip design can be clipped to any drumset or pole, even a drum set for kids – Easily Attachable, enables you to pick and store your drumsticks in seconds – For Home, Studio or while on stage!.
  • ✔OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA – Our new Drumstick Holder is the most durable and reliable product of its kind in the market.
  • We have been crafting the best drum accessories, display systems and musical hardware that you can buy for over 30 years.
  • ✔LIFETIME STRUCTURAL WARRANTY - The String Swing Drum Stick Holder is made in the USA with solid HEAVY DUTY STEEL construction and backed by a LIFETIME STRUCTURAL WARRANTY – Make sure your drumsticks are always within reach by Adding yours to cart Now while su....
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER ：Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock

String Swing BCC03F4-FW-C Cello Hanger Wall Mount with Bow Holder Peg – Electric and Acoustic

  • ✔UNLIKE THE “TYPICAL” CELLO HANGERS OF UNKNOWN origin and quality that potentially puts even the finest CELLO like Cecilio, D Z Strad, Yamaha, Merano, and Primavera in “life threatening” danger, the STRING SWING CELLO HANGERS are CERTIFIED 100% MADE IN USA with AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the “right hands”.
  • ✔CELLOS ARE MORE THAN JUST INSTRUMENTS – While safer when transported inside a case along with your rosin, bow, tuner, and endpin rest or anchor, cellos are also practically “meant” to be displayed for your enjoyment even when you are not rocking it, the STRING SWING CELLO HANGERS will turn your cello into a piece of “Wall Art” while keeping it safe and sound.
  • ✔YOKE PIVOTS TO ACCOMMODATE VARIOUS HEADSTOCKS– Great for cellos with various sized headstocks.
  • Personalized protective padding gently and securely supports the instruments.
  • Cradle hangs all cellos including electric and acoustic.
  • ✔OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA – No matter what kind of Cell that you have, you can count on us to keep it safely stored, we have been crafting the....
Check Stock

Blaze 16-Inch Stainless Steel Paper Towel Holder - BLZ-PTH-R

  • Stores paper towels for convenient access.
  • Rounded bevel design adds structural integrity to the holder.
  • Stainless steel construction is durable in outdoor conditions.
  • Rounded bevel design adds structural integrity to the paper towel holder.
Check Stock

Lenox RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Extra Heavy Set, Positive Rake, 222\ Length, 1-1/4\ Width, 0.042\ Thick, 2-3 TPI

  • RX+ vari-tooth design reduces strippage at high feed rates.
  • Bimetal for cutting carbon steel and structural steel.
  • Good for cuts in tubular shapes, structural shapes, and tubular bundles.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check Stock

Augtouf 6 Pack Cut Off Wheel, 4 1/2'' Angle Grinder Thin Cutting Wheels for Metal & Stainless Steel 4.5"x1/16"x7/8"

  • PRODUCT SPECIFICATIONS - 4 1/2 Inch Cut Off Wheel, with 7/8" arbor, 1/16" Thickness. Up to 13,300 maximum RPM setting (>common 13,000 RPM). Compatible with 4-1/2 inch die grinders and angle grinders with 7/8-inch arbor.
  • PREMIUM CORUNDUM RAW MATERIALS - Higher cutting efficiency and abrasion resistance than aluminum oxide grains, reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting in metal and stainless with safety and longer service life.
  • WIDE APPLICATIONS - Designed for cutting fiberglass, steel, iron, stainless steel, and other ferrous metals for cutting action. Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural galvanized steel, sheet metal, structural tubing, black steel.
  • SAFETY MANUAL - Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depend on the work.
  • AFTER SALE SERVICE - 180 days warranty are available for all of our customers, need any further help please feel free to contact us..
Check Stock

Hold Up Displays Handgun Hanger and Gun Storage for Holding Colt Smith and Wesson SIG Ruger Pistols - Heavy Duty Steel - Made in USA

  • ✔UNLIKE THE “TYPICAL” GUN HANGER OF UNKNOWN origin and quality that potentially puts your pistols like Remington, Sig Sauer, Glock and Springfield Armory in “life threatening” danger, the HOLD UP DISPLAYS GUN HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are shooting your guns or not, they are always in the “right hands”.
  • ✔GUNS ARE MEANT TO HAVE PROPER STORAGE – While safer when transported inside a case along with your lubricating oil, safety ear muffs, ammo, magazine and other tactical gear, guns are also practically “meant” to be displayed for your enjoyment even when you are not shooting, the HOLD UP DISPLAYS GUN HANGERS will turn your gun into a piece of “Wall Art” while keeping it safe and sound.
  • ✔YOKE PIVOTS TO ACCOMMODATE VARIOUS BUTTSTOCKS – Great for all handguns and revolvers.
  • Personalized protective padding gently and securely supports the firearm, unlike non padded hangers that can leave scratches on your firearm.
  • Deep cradle design prevents the gun from being improperly placed in the hanger.
  • ✔OVER 10 YEARS SERVING GUN OWNERS ALL OVER AMERICA – No matter what kind ....
Check Stock

String Swing Trumpet Holder - Stand for Piccolo Pocket and Standard Trumpets - Stand Accessories Home or Studio Wall - Musical Instruments Safe without Hard Cases - Made in USA

  • ✔UNLIKE THE “TYPICAL” TRUMPET HANGERS OF UNKNOWN origin and quality that potentially puts even the finest TRUMPETS like Mendini, Yamaha, Bach, Gretzen, and Jean Paul in “life threatening” danger, the STRING SWING TRUMPET HANGERS are CERTIFIED 100% MADE IN USA with AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the “right hands”.
  • ✔TRUMPETS ARE MORE THAN JUST INSTRUMENTS – While safer when transported inside a case along with your valve oil, slide grease, cleaning kit, mute, and mouthpiece, trumpets are also practically “meant” to be displayed for your enjoyment even when you are not rocking it, the STRING SWING TRUMPET HANGERS will turn your trumpet into a piece of “Wall Art” while keeping it safe and sound.
  • ✔BELL REST ADJUSTS TO ACCOMMODATE VARIOUS SIZED TRUMPETS– Great for trumpets of all sizes including piccolo, pocket, and standard.
  • Personalized protective bell padding gently and securely supports the instruments.
  • Adjustable bell rest design works great with both student and professional trumpets.
  • ✔OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA – No matter what kind ....
Check Stock

JET HVBS-712D, 7\ x 12\ Deluxe Metal Bandsaw, 4 Speed, 3/4HP, 1Ph 115/230V (414560) & Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI

  • Product 1: HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area..
  • Product 1: REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up..
  • Product 1: DURABILITY: Blade wheels are made from flanged cast iron..
  • Product 1: LONGER BLADE LIFE: Base contains a coolant system that helps to increase cutting efficiency and blade life..
  • Product 2: Tuff tooth design reduces tooth strippage.
  • Product 2: Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Product 2: Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • Product 2: Wavy tooth set helps prevent stripping for cutting thin workpieces.
Check Stock