Top Steel Swivel Trailer Jacks

SteadyFast Made in USA, Stabilizer System for 5th Wheel, Travel and Camper Trailers Without Auto Leveling - 4 Foot Plates- Item B

  • Stabilize your Trailer in less than 60 Seconds. Made in USA System Stabilizes Parked Travel, Camper, or Fifth Wheel Trailer.
  • Trailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates plus two additional so all jack footplates will match..
  • Installs Permanently so there is nothing to setup or store. Approximately 2-3 hour install...
  • Works on both 5th Wheels and Travel Trailers with existing stabilizer jacks. If you have an Auto Leveling system Please check out our Item C..
  • Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks.
Check Stock

Dumble 5th Wheel Tripod Stabilizer Gooseneck Trailer Jack - 5000lb Cap Adjustable RV Jack Stabilizer RV King Pin Tripod

  • ... Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
  • [Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
  • 5,000-pound (2.5ton) weight capacity adds support and enhances stability.
  • [Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
  • Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
  • [Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
  • Threaded bar makes it easy to adjust the cup height.
  • [Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
  • When not in use, adjustable tripod folds to 7-inch (17.8cm) diameter for easy storage.
Check Stock

Fulton 500320 XP to F2 Adapter Kit for F2 Swivel Mount with 4' Frame

  • Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
  • Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
  • Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
  • installs easily - no drilling or welding required.
  • All necessary mounting hardware and complete installation instructions included.
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28300 Weld-On Bracket-Style Swivel Trailer Jack, 2,000 lbs. 10-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10-1/2 inches of vertical movement and operates using a top-wind handle (11-1/2-inch retracted height, 21-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel bracket for ready welding.
Check Stock

CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 10 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28358 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15-1/2 inches of vertical movement and operates using a side-wind handle (15-5/8-inch retracted height, 31-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 23582 Stainless Steel Swivel Trailer Hitch Pin, 5/8-Inch Diameter, Fits 2-Inch Receiver

  • NO CLIP NEEDED. The unique, integrated swivel clip of this hitch pin eliminates the need for a separate hitch clip. There's no risk of losing the clip because it is permanently attached and always right there when you need it.
  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO HANDLE. The 105-degree bend in this swivel trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • NON-CORROSIVE. This tow hitch pin is constructed from stainless steel to ensure dependable strength and long-lasting corrosion resistance in spite of the elements.
  • SIMPLE, SECURE INSTALL. To install this swivel trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver. With the pin holes in the side of the receiver tube lined up, insert the pin and turn the clip.
Check Stock

Preservation Solutions - Wood Juice Quart - Semi Dry Wood Stabilizer

  • Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base.
  • Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!.
  • Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you....
  • Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5".
  • Capacity: 6,000 lbs per jack, bulit by same material as other brand's 7500lbs jacks!.
Check Stock

Jack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston

  • [Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle.
  • [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle.
  • [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle.
  • [Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock

SteadyFast Stabilizer for 5th Wheels, Travel, and Camper Trailers Without Auto Leveling - 2 Foot Plates- Item A

  • Best Performing Stabilizer System, ONLY 60 SECONDS to SETUP, No need to crawl under trailer, No Storage Space Needed, Made in USA,.
  • Only Available in Dark Grey. Permanently installed in 2-3 hours..
  • Works on 5th Wheels and Travel Trailers with existing stabilizer jacks. If your trailer has an auto leveling system Please order our Item C...
  • Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks or any other parked trailer stabilizers.
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • 【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
Check Stock