Top Steel Tailgate

Compatible with 15-21 F150 Tailgate Assist, Truck Tail Gate Lift Assist Tailgate Shock Compatible with 2015 2016 2017 2018 2019 2020 2021 Ford F-150 XL XLT Platinum Raptor King Ranch

  • EASY ON YOUR HANDS: Even hands-free, Orion Motor Tech's heavy-duty tailgate assist safely and smoothly controls the drop rate of your pickup's tailgate, making it safer and easier to use.
  • it also acts as a tailgate lift and makes your tailgate easier to close for the whole family.
  • BUILT TO LAST: This tailgate assist is constructed of structural-grade 45# steel electroplated for outstanding strength, durability, and corrosion resistance.
  • the riveted mount plate outlasts its welded competition to ensure years of satisfied use.
  • WIDE COMPATIBILITY: Our tailgate assist is specially designed for compatibility with all Ford F-150 XL, XLT, Platinum, Raptor, King Ranch, and Limited models from 2015 to 2021. But 2021 models need to remove one of tie down hooks to install..
  • FAST & EASY TO INSTALL: With the clear instructions, this tailgate assist will be out of our box and working on your truck within minutes.
  • a few wrenches (M5 and 10 mm) are needed but no drilling or taillight removal is required and an optional ball mount plate comes included for worry-free installation.
  • SATISFACTION GUARANTEED: This helpful truck accessory comes with Orion Motor Tech's usual strong warranty and friendly 24/7 customer service to provide a worry-free purchase, easy installat....
Check Stock

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

  • ★ Replacement Part Number: FL3Z-99406A10-A FL3Z99406A10A. fits for 2015 2016 2017 2018 2019 Ford F150..
  • ★ This tailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
  • ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
  • ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mount....
Check Stock

360° Rotated Tailgate Ladder Truck Bed Step Ladder Universal for Pick Up Truck SUV Heavy Study, Foldable, Carbon Steel

  • Supgrated Univeral fit Tailgate Ladder makes getting in and out of your truck bed a breeze.
  • The tailgate ladder made of Carbon Steel solid and durable.
  • Sturdy Rubber Ladder Feet ensure hold on the ground stablely.
  • Universal fit, this ladder can attaches to your bed tailgate and easily folds out when needed..
  • Weight capacity of the ladder is over 300kg.(over 660 pound).
Check Stock

BETOOLL Tailgate Hinge KIT for 99-06 Chevy Silverado GMC Sierra 4 Piece Set

  • Material:Each Tailgate Hinge Kit is made with heavy-duty steel. The plating has been tested under strenuous quality control measures to hold up against even of the worst weather conditions for RUST-FREE wear & tear. Strong, heavy duty, durable Free metal. New in package from factory.
  • Include:Four (4) tailgate hinges - 2 body mount (left/right) and 2 tailgate mount (left/right), includes 4 separate genuine OEM Chevy/GM part numbers: 15074252, 15074253, 15078745, 15078746..
  • Fit Vehicle:Fits 1999-2006 GMC Sierra Series Pickups, 1999-2006 Chevy Silverado Series Pickups, 2005-2006 Hummer H2, and 2006 Hummer H1..
Check Stock

Moab Cargo Tailgate Net for Pickup Truck Bed Extender, Compatible with Ford Titan Tundra Ram Silverado Sierra

  • 1.Cargo tailgate net is installed on truck bed extender. It fits Ford Titan Tundra Ram Silverado Sierra Tailgate Extenders.
  • 2.It is made by using rubber to seal the edges of the stainless steel mesh and will not rust.
  • 3.Our Cargo tailgate netting is to prevent small items from leaking out of the truck bed extender gap.
  • 4.The installation takes about an hour. We provide detailed installation instructions..
Check Stock

Cache Tailgate Pad - Basecamp System Includes Two Lounger Chairs Jeffrey Cooler and one Basecamp pad - Great for Picnic Camping Fishing Hunting Surfing and Many More Adventures

  • TOUGH AS NAILS - As with all of our accessories, the Basecamp System is wrapped in waterproof PVC and coated in PU Nylon. It won’t bubble, shrink, or break down and can even be run through a car wash! We are confident this is the highest quality tailgate pad out there. We stand by that with our five year, no questions asked, industry-leading warranty.
  • THEFT RESISTANT - The Basecamp System is locked to your tailgate via a steel wire beaded cable that’s sandwiched between two industrial-size nylon straps. The strap then attaches to a combo locking carabiner that’s made with cast iron and reinforced with heat-treated steel components.
  • The lounge chair is built upon comfortable lightweight aluminum frame with an expandable large exterior zip-up mesh pocket provides storage for everyday items & reliable tote handle makes for easy mobility.
  • Jeffrey cooler that is capable of holding 18 12 oz. Cans and ice, high-density nylon webbing can hold over 500 lbs. and welded inner seam to ensure your contents stay cold for up to 24 hours.
  • Cache basecamp pad features an adjustable payload strap that turns your tailgate into an anchor point that tie-down bikes, surfboards, and anything else that sticks out of your tailgate.
Check Stock

Universal Foldable Tailgate Ladder for Pickup Truck 360° Rotatable Heavy Duty Steel Rear Gate Step Ladder,Quick Use Tailgate Step Ladder with Lock Device Fit

  • Good Material -- The Tailgate ladder is made of high-grade steel. It is not only light weight, but also strong and durable. The black powder coating on the surface can effectively prevent surface rust and scratches..
  • Features -- The tailgate ladder can rotate 360 degrees by the directional base, can be rotatable in the horizontal direction and vertical direction, to meet different use requirements. It has special lock device, after use, the ladder can be well-locked to the tailgate.
  • Load Capacity -- The tailgate step can hold over 300 pounds . The ladder’s length is 40", width is 13.22" .When in use the ladder, deploys in several seconds..
  • Application -- Compatible with pickup truck models, Universal fit tailgate ladder. When installed, you need no worry about danger of jumping or bumping anymore. It makes your climb and work easily, safely, and more efficiently.
  • Easy to install -- Easy to install and can be deployed in minutes, but you need to drill 8-12 holes with an electric drill in optimal location of your truck. then install with bolts and screws. And it is also easily to be removed with repair tool..
Check Stock

YIWANG Aluminum Alloy Black Car Rear Door Foldable Table Cargo Shelf Storage Tailgate Table for Land Rover Defender 110 2020-2022

  • FITMENT - Fit For Land Rover Defender 90 110 2004-2022..
  • DESIGN - Tailgate Table can be folded to save space. Collapsible and foldable, great for saving room, practical part for outdoor dinner and bring you greatest convenience..
  • MATERIAL - Made of high quality metal steel. Black textured powder coat for durability and corrosion protection..
  • INSTALLATION - Easy to install. Minor drilling is required. Installed in the tail gate position. Perfectly match with your original Defender..
  • PACKAGE - 1 set of Tailgate Storage Shelf Tailgate Table..
Check Stock

Can-Am LinQ Tailgate Extension for 21 COM1000XT

  • Adds rear cargo capacity when the tailgate is open.Anti-corrosion coating with durable powder coat finish.Detailed Specifications:Integrated design that lets the extension fold away inside the tailgate when not needed.Steel construction for rugged durabil.
Check Stock

UNIGT 38427 Tailgate Striker Bolt Compatible with Chevy Silverado Escalade Avalanche Sierra Come with Nuts Replace 11570162 - Set of 2

  • Replace old or worn-out striker, fix a tailgate to prevent that always make a wobbly/squeaky noise or keep falling down.
  • Complete part, come with nuts for mounting and plastic bushing to keep the striker from rattling.
  • Sold in pairs, you need two striker bolt for both sides of the tailgate and replace them at the same time.
  • Made of high-quality Steel Material, Painted for added resistance to rust and corrosion.
  • Easy to install, take the tail lights out, remove the old nut and reinstall the new tailgate striker bolt, done.
Check Stock

FEIDKS New Tailgate Assist Tailgate Damper Kit for 2015-2019 Ford F150 Replaces# FL3Z-99406A10-A FL3Z99406A10A

  • High Quality:This tailgate shock is precisely engineering designed with integrated shock absorber, Made from high-quality and extensively tested stainless steel,which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate.
  • Replace Part Number:FL3Z-99406A10-A,FL3Z99406A10A.Please use enter your vehicle in your Amazon Garage above to see if this part is compatible with your vehicle.
  • Compatible with: 2015 2016 2017 2018 2019 Ford F150.
  • 1x Ball mount.Fast & Easy Installation，Lower Your Tailgate in A Safe & Controlled Manner，Soft Landing at Full Open Each Time，Places Support Strut Behind Taillight.This kit installs seamlessly and hidden behind the tail lights..
  • Service:We offer 1 YEAR warranty.If you have any problems with the products you received, please contact us in time, we will solve the problem within 24 hours..
Check Stock

Lucky Seven FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,FL3Z99406A10A for 2015-2019 Ford F-150

  • FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,REPLACeS PART# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • FL3Z-99406A10-A/,fl3z-99406a10-a tailgate shock assembly,This tailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering.2015 2016 2017 2018 2019 Ford F150. The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body..
  • Fl3z-99406a10-a oem for 2015 - 2019 Ford F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the Ford F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights,REPLACEMENT TAILGATE DAMPE....
Check Stock