Top Steel Thread

Hillman 150015 Coarse Thread Hex Nuts, 1/2\-13, 50 Pieces

  • Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Feel free to contact us if you have no idea about what size to choose..
  • Alternative to a hex nut and an anti-vibration washer. Ideal use for applications under vibration. You could also find the matched screws with different head types in our shop..
Check Stock

uxcell 1/4-20 304 Stainless Steel Helical Recoil Coil Wire Thread Insert 25pcs

  • 304 Stainless Steel Material, Wire Thread Repair Inserts..
  • threaded insert 304 stainless steel are used to replace old striped out or cross thread holes..
  • Drill a specified hole, the hole and insert the coil for a complete installation..
  • Widely used in steam turbines, electronic communications, computers, lamps, mechanical equipment, radiators, and 3D prints equipment..
Check Stock

Thread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve

  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
  • Easy to use,convenient to operate,saves effort and time in use..
Check Stock

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

  • Extremely stable performance: This thread helical coil repair tool kit is made of high speed steel and red color plastic handle, sturdy and durable in use and can be used in daily repair, car repair, drilling machine, etc.
  • Made of stainless steel of good rust and corrosion resistant..
  • Excellent practicability: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc..
  • Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
  • All accessories are integrated in a box for convenient transportation and carriage..
  • Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and da....
Check Stock

uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool

  • Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
  • Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock

iexcell 850 Pcs M3 x 4/5/6/8/10/12/14/16/20/25/30 Stainless Steel 304 Hex Socket Head Cap Screws Bolts Assortment and Nuts Kit

  • 425 Pcs M3 Hex Socket Head Cap Screws, Thread Pitch 0.5 mm, Thread Size Diameter 3 mm ( Range: 2.927 ± 0.053 mm ).
  • Material: Stainless Steel 304, High Strength and Anti-corrosion in Various Conditions.
  • Single Thread Size, Multiple Thread Lengths: The Thread Size Diameter of All Screws in This Kit is the Same 3 mm ( Range: 2.927 ± 0.053 mm ), Thread Lengths are Multiple from 4 to 30 mm: M3 x 4, M3 x 5, M3 x 6, M3 x 8, M3 x10, M3 x 12, M3 x 14, M3 x 16, M3 x 20, M3 x 25, M3 x 30.
  • 425 Pcs M3 Hex Nuts, Thread Pitch 0.5 mm,to Meet Different Applications.
  • 1 Pcs Hex Key, Hex Size: 2.5 mm, to Drive These Screws Conveniently and Easily.
  • Material: Chrome-Vanadium Steel and Nickel Plated: Higher Strength and Anti-rust.
  • Package: 425 Pcs M3 Hex Socket Head Cap Screws, 425 Pcs M3 Hex Nuts and 1 Pcs Hex Key Come in a 15-grids Organizer Box, Organized Conveniently and Easily.
Check Stock

uxcell Metric Machine Tap M12X1.25mm H2 HSS Uncoated 4 Straight Flutes Thread Tapping DIY Tool 2pcs

  • Thread Size: M12X1.25mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut..
Check Stock

Stainless Hex Head Bolt, 18-8 Stainless Steel (5/16\-18 x 1\)

  • Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Hex bolts generally require flat & lock washers to evenly distribute the pressure from the head and the nut. You could find the matched hex nut and flat & lock washers in our store with a reasonable price to save your time and money..
Check Stock

Glvaner M12-1.75 Thread Size (10 pcs) Stainless Steel Hex Locknuts Lock Nuts Hexagon Locknuts 304 Stainless Steel Full Thread

  • Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Width from point to point of the head: 21mm.
  • Feel free to contact us if you have no idea about what size to choose..
  • The nylon insert helps grip the screw thread to prevent from loosening. You could also find the matched screws with different head types in our shop with a very reasonable price..
Check Stock

52Pcs Stainless Steel Thread Measuring Gage, Precise Screw Thread Measuring Gage Pitch Measuring Tool 60 Degree (Metric& Imperial)

  • [Adjusted Freely]: Thread measuring gage is using rotary switch, which can be freely adjusted. Mini size and compact, the pitch measuring gage won't occupy too much space, carry it around easily with the convenience.
  • [Magnetic Head]: The thread plug gage, through quenching processing, strong hardness, head with a magnetic. Narrow-leaved designed to measure the external and internal threads - even in small holes.
  • [Precise Measurement]: Thread measuring gage comes with precise measurements and simple design, which can be widely used and durable. Measuring range: 0.25 - 6.00mm/0.0098" - 0.23".
  • [Best Checking Angle Tool]: Stainless steel thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Applied to measure thread and external thread tooth pitch, a great measuring tool for your working.
  • [Premium Stainless Steel Material]: Made of premium stainless steel material, this measuring gage is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
Check Stock

Fastcom Press-In Threaded Insert Steel, Compatible With Metal, 1/4\-20 Internal Threads External Threads, 0.408\ Length (Pack of 50)

  • 【stainless steel】Thread inserts are made of high-strength diamond-shaped steel wire with high strength and wear resistance..
  • 【full set】This thread repair kit contains installation tool, thread tap, drill, wire thread inserts, you can repair thread with no other tool needed..
  • 【working principle】This thread repair set can be placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision..
  • 【box packed】All accessories are well packed in a box for easy carrying and storage, every tool has a place to place in case of mess..
  • 【wide applications】This thread repair set can be widely used for high voltage switch gear, microwave communication, automotive parts, aerospace precision parts, electronic products, air equipment, radiators, etc..
Check Stock

uxcell Weld Nuts,7/16-20 Tab Base Carbon Steel Machine Screw 4 Projection Silver 25Pcs

  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 25Pcs x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock