Top Steel Toggle Bolts

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack

  • 【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
  • 【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

HELIFOUNER 24 Pieces Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall - 1/8 Inch 3/16Inch 1/4Inch

  • 【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
  • 【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....
Check Stock

Simpson Strong-Tie FT18250C25 3/16\FlipToggle Anchor with 2-1/2\ Bolt, 25ct

  • ...ronment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
  • 【INSTALLATION】--- First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【PACKAGE】--- All of toggle bolts and wing nuts are packed in a durable and sturdy Box to efficiently bear the weight of the whole package. In order to avoid the screws being scattered or lost during use, we specially package for each different type of screws for your convenience and storage. Not only give you the best product, but also the best storage system for them..
  • 【WIDE APPLICATIONS】--- Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed qui....
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

3/16 x 4 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/16 / Screw Size 10-24 x 4 / Drill Bit/Hole Size 1/2 Carton 50 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/16 x 5 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/16 / Screw Size 10-24 x 5 / Drill Bit/Hole Size 1/2 Carton 50 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/8 x 4 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/8 / Screw Size 3/8-16 x 4 / Drill Bit/Hole Size 7/8 Carton 25 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/8 x 3 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/8 / Screw Size 3/8-16 x 3 / Drill Bit/Hole Size 7/8 Carton 25 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock