Top Steel Truss

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ... thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ... thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Adjust-A-Gate Steel Frame Gate Building Kit 36 -60 wide openings 5 - 6 high fence

  • Adjustable Frame and truss system for quick installation with professional results for almost any application.
  • All steel Frame prevents sagging and dragging adjustable Anti-Sag diagonal truss cable.
  • All galvanized steel with UV powder coating finish.
Check Stock

IMScrews 100pcs #8 x 1/2" Self Drilling Truss Head Screws Standard Thread Wood Work MDF 410 Stainless Steel

  • ✅Diameter: #8 (4.2mm), Length: 1/2 in (13mm), Material: 410 Stainless Steel.
  • ✅Pack of 100pcs truss head screws in durable IMSCREWS plastic bag, prevent losing, it can be reserved for a long time..
  • ✅Modified Truss head is extra wide with a low-profile dome and integral round washer..
  • ✅SPECIAL FEATURE: 100% 410 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today..
  • ✅For using in Steel, Sheet Metal, and attaches Metal or Steel to Metal or Sheet Metal Steel. Installed with #2 X-Shaped Phillips Driver..
Check Stock

DJ Booth Tabletop With 8FT Lighting Truss Stand Package by FAT TOAD | Foldable Panel Portable Stage Platform Facade White Scrim Cover | Video Light Projector Display Workstation For Sound System Event

  • STAGE PLATFORM METAL FRAME CONSTRUCTION WITH DJ BOOTH TABLE TOP: The heavy-duty square steel frame tubing is light enough for transport and heavy duty enough to hold your gear. The removable solid steel tabletop shelf easily hangs right on the frame and has a hole in 2 corners to run your wires through. The top panels are made in a steel honeycomb design and can easily be used to mount a lightweight TV or logo sign. These panels also angle in to help protect your equipment..
  • DJ TABLE STAND WITH 8FT X 9FT DJ TRUSS I-BEAM SYSTEM: The 8-foot-wide I-beam light truss system is built into the frame. The truss has 16 hanging points (12 bolts and wingnuts included) and is easily adjusted by one person from 5 to 9 feet tall. There are no tripod legs, which saves space and both the truss and mounting poles are easily removed when it’s time to pack up. It’s durable and will hold up to 60lbs of lights, fog machines and lasers..
  • DJ TABLE COVER WITH WHITE COVER DISPLAY SCRIM: While other models require you to use a bulky blanket as a SCRIM, ours model utilizes four separate panels that are easily attached with Velcro. This results in a much cleaner and less wrinkled look. (Pl....
Check Stock

1/4 -20 X 3 Stainless Phillips Truss Head Machine Screw 25pc Coarse Thread 18-8 304 Stainless Steel by Bolt Dropper

  • 【100% Solid Stainless Steel】These Truss Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of....
  • 【Screws That You Can Depend On】Our Truss Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is....
  • 【Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wet environments. Bolt Dropper hardware is the highest....
  • 【Dimensions】Diameter: 1/4" | Length: 3" | Threads per Inch: 20 | Thread Type: Coarse | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
  • 【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

MusicNomad Precision 6 pc. Guitar Setup Gauge Tool Set - Plus 24 pg. Instructional Booklet and Storage Case (MN604)

  • Each Gauge is Accurate, Made of Premium Stainless Steel, Etched Numbers & Text, and Has Instructions Printed on Each Gauge.
  • Truss Rod Gauge: Includes the 3 Most Common Truss Rod Relief Measurements (.006.
Check Stock

Titan Attachments 20 FT Economy Telescoping Hydraulic Skid Steer Truss Boom with 120-inch Reach

  • IDEAL FOR CONSTRUCTION COMPANIES: The hydraulic truss boom allows you to turn your skid steer into a mobile crane. Skid steers will enable you to move around your job site easier and fit into smaller areas than a fullsize crane..
  • 2INCH CYLINDER: The attachment is equipped with a massive hydraulic cylinder with a 2inches Bore and a 60inch stroke. We have also included the hydraulic hoses fitted with a male and female flatfaced coupler to connect the truss boom to your loader quickly..
  • HEAVYDUTY DESIGN: The Telescoping Skid Steer Truss Boom is hydraulically operated and constructed with 3 x 3inch, 5 mm thick structural steel. Allowing the boom to hold 500pounds when fully retracted and 180pounds when fully extended..
  • UNIVERSAL SKID STEER CONNECTION: Our superior design fits with almost all skid steers, loaders, and tractors such as the Ford 8n, 9n, Kubota, BX, or Kioti tractors. This kind of connection is known as SSQA, or Universal Skid steer style quick connect..
Check Stock

KING BIRD Commercial Pop Up Canopy Tent, 10'x10' Heavy Duty Canopy Tent Shelter Waterproof, with Truss Structure & Wheeled Bag for Outdoor Use (White)

  • ...re to increase wind resistance and the overall strength of our heavy duty canopy tent..
  • COMMERCIAL GRADE STABILITY: Heavy duty pop up canopy tent thick frame tubes with anti-oxidant coating to protect against wet weather conditions, rusting and erosion. The 10x10 commercial canopy tent with 8x8cm wide and thick steel feet,whhich made the canopy tent more stable. The ez up canopy tent commercial frame is very strong and weights 22.5kg.One year after-sale protection for the instant canopy tent frame, six months after-sale protection for canopy fabrics and accessories..
  • EXPERT UV PROTECTION & WATER RESISTANCE: The commercial canopy tent top made of 420D Oxford, with premium UV coating, standard UPF 50+ providing 95% UV protection, protect your skin in direct sunlight. Also heat sealed seams makes the ez up canopy tent 10x10 well waterproof..
  • EASY TO ASSEMBLE: The smart design of this heavy duty canopy tent helps you set up and take down in minutes. Our pop up canopy with durable anti-corrosion resistant powder-coated steel frame, fully assembled, super easy to set up within minutes. The easy-glide and push-button brackets make the pop up tent easy to slide open and closed. The telescoping legs offer 3 level of positions to improve the ease of us....
Check Stock

Seville Classics MEGA RACK UltraDurable Commercial-Grade 5-Tier NSF-Certified Steel Wire Shelving with Wheels, 60' W x 24' D, Chrome

  • 60" x 24" UltraDurable Commercial-Grade Shelves - Includes 5 solid-steel wire shelves with triple-truss support and 4 steel poles for heavy-duty multipurpose storage..
  • 4, 000 lbs. Capacity - Triple-truss reinforced shelves hold to 800 lbs. (evenly distributed) in systems assembled with leveling feet..
  • NSF-Certified Storage - Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment for use in dry environments..
  • Chrome Plated Steel - Chrome finish provides necessary corrosion resistance in dry environments for reliable, long-term storage in restaurants and other businesses..
  • Bonus 4" Wheels + Leveling Feet - Includes smooth-rolling caster wheels (2 locking) for easy positioning in your garage, office, warehouse, workshop or home..
Check Stock

Amerock BP36562PNSS Esquire Cabinet Pull, 8 in (203 mm) Center-to-Center, Polished Nickel/Stainless Steel

  • Finished in Polished Nickel/Stainless Steel.
  • Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
  • Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.
Check Stock

#8 x 3/4' Hex Washer Head Self-Drilling Tek Screw Zinc Plated Steel for Attaches Sheet Metal Steel or Steel to Metal - Box of 100

  • HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear.
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener.
  • CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications.
  • For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver.
  • Amazon Protected Money-Back Satisfaction Guaranteed.
Check Stock