Top Steel Wheel 8 50 24

THANOS Cut Off Wheel Cutting Wheel 50 Pack 4-1/2 x3/64 x7/8 Metal&Stainless Steel,Ultra Thin Cutting Disc

  • 【50 PACK】This is for a pack of 50 pieces of our cutting wheels.Each disc is 4.5 inch in diameter with a 7/8" metal center and 0.045" thickness..
  • 【MATERIAL】Proprietary aluminum oxide grain for long life and fast cutting.Cut off Wheel is fully reinforced with 2 bonded sheets of Fiberglass....
  • 【PERFORMANCE】Thin 0.045'' cutting wheel design for fast burr free cutting. Perfectly compatible with all 4-1/2 inch angle grinders with 7/8-inch....
  • 【APPLICATION】Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper....
  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc)..
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

MaxxHaul 70075 Motorcycle Wheel Chock

  • 3-position adjustable holes on wheel base to accomodate various motorcycle wheels.
  • Includes hardware and mounts securely to floor, truck or trailer.
  • Locks your tire as you roll it into your wheel chock.
  • Easy for one person to strap-down a motorcycle.
  • Durable powder coat finish to resist rust and corrosion.
  • Overall Dimensions: 24" L x 9-3/4" W x 12-7/8" H.
Check Stock

Rhino Rack Tire Step, Non-Slip, Adjustable 12\

  • ...the height that works for you. Folds flat for easy storage. Holds up to 250lbs..
  • SAFER LOADING & UNLOADING - The Rhino-Rack Wheel Step is the safe and effective way to load and unload your roof racks, luggage carriers, trays and any gear mounted on your vehicle's roof..
  • STRONG & DURABLE - Made from strong and durable steel, the wheel step unfolds and hangs over your vehicle's wheel with a platform wide enough to comfortably stand with both feet whilst loading and unloading your gear..
  • ADJUSTABLE HEIGHT - The Rhino-Rack Wheel Step is designed to be adjustable in height and width so that it can fit most SUV and truck tire sizes up to 10.5" wide and 33" tall..
  • FITS TIRE SIZES: 30/9.50R15, 285/75R16, 33/10.5R15, 265/70R16, 265/75R16, 265/70R17, and 33/12.50R15 (Tight Fit)..
  • MADE STRONG - Made from strong and durable powder coated steel. 250lbs load capacity..
  • STRAPS INCLUDED - Includes tightening ratchets as well as 2 cam buckles, for use as needed..
  • STEP SPECS: Step Dimensions are 22" wide/8" deep..
  • EASILY MOUNTABLE - Easily mountable to your Rhino-Rack Pioneer Tray or Platform. Also folds flat for easy storage anywhere..
  • SIMPLE - No need for Step Bars or a Hitch Step when you can get an easy to use, portable, foldable and adjustable tire step by Rhino-Rack....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

SHANGNIULU 100pcs Wool Felt Mandrel Mounted Grinding Polishing Buffing Wheels Polishing Accessories Set-1/8 Inch Shank

  • High quality material: wire brushes set is made of brass and steel , durable, long service life on the toughest cleaning jobs..
  • Practical tools: these wire brushes can remove burrs, rust, dust, removing the oxide layer, scale and paint in hard to reach areas, etc..
  • Common Usage: Fit your hand drill, drill press, and foredom tool with a 1/8" Collet.
  • Please note that before you use the Wire Brushes Sets,please make sure you wear a good pair of safety glasses and other Protective equipment!.
  • What you get: 72 pcs pure copper wire brush wheel, include 24pcs T-shape wire wheel brushes, 24pcs pen-shape wire wheel brushes, 24pcs bowl-shape wire wheel brushes..
Check Stock

Heater Sports Softball Pitching Machine with 9 Ball Automatic Feeder

  • Adjustable Speed Control adjusts for a variety of pitch speeds.
  • Auto-Ball Feeder pitches every 9 seconds.
  • Fully Enclosed Wheel provides maximum safety.
  • Throws Pop-ups, Line Drives, and Grounders.
Check Stock

Wheel Kit, 6" Black Blow-Molded Hollow Plastic Wheels & Axle Caps for 3/8" Axle Shaft - Includes 2 Wheels & 2 Axle Caps (696561)

  • For battery chargers with 3/8" axle shaft. Also used on barbecue grills and other light equipment, check dimensions for proper fit. Replaces the following battery charger wheel sets: Associated 605672, Century 413-044-666, John Deere PT1598, PT16173, PT19357..
  • PLEASE NOTE THAT THESE WHEELS ARE FOR LIGHT-DUTY APPLICATIONS. DO NOT INSTALL THESE WHEELS ON 2-WHEEL EQUIPMENT THAT WEIGHS OVER 50 LBS. USE ONLY SMOOTH AXLE SHAFTS - DO NOT USE THREADED ROD. DO NOT USE SPACERS, SPRINGS OR SHIMS ON UNDERSIZE AXLES..
  • Kit includes 2 wheels, 6" black hollow plastic, and two 3/8" press-on axle caps. Steel axle caps are press-fit, no special tools required..
  • Load Rating: 25 lbs per wheel (50 lbs per pair).
Check Stock

TILAX Wire Brush for Drill Set, 19 Piece Wire Wheel Cup Brush 1/4 Inch Hex Shank, Arbor 0.012 Inch Coarse Carbon Steel Crimped Wire Brush for Drill Attachment, Rust Removal, Polishing and Abrasive

  • ...ERENT DIAMETERS】 3"(75 mm) Wheel*3pc, 2-1/2"(63mm) Wheel*3pc, 2"(50mm) Wheel*3pc, 1.57"(40mm) Wheel*6pc, 2"(50mm) Cup*3pc and 1.57"(40mm) Pen*1pc. They're well-made and the range of sizes comes in handy..
  • 【MADE FOR DURABILITY】 TILAX steel brush for drill uses 0.012 Inch carbon steel crimped wire and excellent fixing that hold fast and do not bend easily which are made of a better grade of steel. Either way it has made them durable as can be..
  • 【WIDER APPLICATIONS】 Wire brush drill attachments can be used for quick surface adhering treatment before spray coating and electroplating. The drill wire brush set also does well in removal, such as removing rust, paint, burrs, and corrosion from wide flat surfaces, small areas, corners, wheel hub and screw..
  • 【SECURITY AND STABILITY】 TILAX wire brush attachment for drill is rigidly secured by a plate-shaped or cup-shaped thickened metal holder to ensure a better safety and stability. The sturdy 1/4” hex shank does not wear out or break easily and fits most types of drill bits and mold grinding machines..
Check Stock

Tusk Rear Wheel Spacer Upgrade Kit Blue For Yamaha YZ450F 2009-2022

  • WHEEL SPACER 4x156 to 4x156 PARAMETER:- Thickness:50mm（2 inch）,Bolt Patter4x156,Stud Grade：10.9mm（3/8），Hub Center:131mm，Thread Size: 12x1.5 Studs..
  • 2 INCH WHEEL SPACER 5 LUG FITMENT:- Fit for 2014+ Polaris RZR XP,2015+ Polaris RZR Trail,2015+ Polaris RZR High Performance,2013+ Polaris Ranger..
  • PERFECT PERFORMANCE:- Give your vehicle a more aggressive appearance, improve the handling, performance and stability. They also increase tire clearance, fix brake caliper clearance issues, allows the installation of lifts or lowering kits and wider, larger, or high traction tires..
  • SOPHISTICATED MANUFACTURING:- Machine-manufactured precisely from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion. Extraordinarily strong and light compared to spacers made of steel. The dimensional accuracy is 0.02mm, ensuring processing accuracy and stability..
  • Trustworthy Warranty：We offer "30-day refund, 24-month free replace parts "service. We are committed to do business integrity quality after-sales guarantee. If you have any questions, be free to contact us ..
Check Stock

Makita 5 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2 x 1/4 x 7/8-Inch

  • ...t, Hard Bond Matrix & Wheel Thickness that provide balanced Grind Life, Stock Removal Rate, Precision, Power Demands & Heat Buildup, allowing you to grind longer, consistently precise with maximal wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ EASILY & SMOOTHLY GRIND all steel and metal including welds, carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span due to Makita’s High-performance Brown fused Aluminum Grain and hard bond matrix | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction & general industrial applications.
  • ✅ AVOID Premature Disintegration, Wheel Shatter, & Injury with lower priced wheels by relying on Makita’s proprietary strong bond matrix that binds Premium White Aluminum Oxide with Phenol Resin allowing for optimal grain wear which yields smooth grinding PERFORMANCE, AGGRESSIVITY & BALANCE, grinding longer and faster than other wheels in its class.
  • ✅ QUICKLY REMOVE General Steel, Metal & Weld Stock with Makita’s Coarse 24 Grit Grains | Quality Assured, Aggressive and Long Life....
Check Stock

PUENGSI 2 inch Wheel Spacers 8x6.5 to 8x170 Wheel Adapters for 1999-2010 GMC Sierra 2500HD 3500HD 126.15mm Hub Bore with 14x1.5 Studs

  • ... 【SOPHISTICATED MANUFACTURING】- Machine-manufactured precisely from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion. Extraordinarily strong and light compared to spacers made of steel. The dimensional accuracy is 0.02mm, ensuring processing accuracy and stability..
  • 【QUALITY SERVICE】- If you have any questions, contact with us, we will reply you in 24 hours and offer the solve way for you..
Check Stock