Top Steel panel Lift

FivePears Panel and Plywood Carrier,Metal Gripper For board,Drywall carrying tool …

  • ... up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover..
  • √ 【SOLID METAL CONSTRUCTION】: This drywall gripper is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
  • √ 【SELF-ADJUSTING GRIPPER CLAMP】: This piece of equipment by Fivepears has a versatile, yet simple design that allows the clamp to grip onto a variety of different kinds of panels and sheet goods. As soon as you start lifting, the clamp automatically adjusts to the thickness of the panel or sheet. This innovative tool can hold up to two panels or sheets simultaneously..
  • √ 【EASY ON YOUR BACK】: Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift..
Check Stock

Sheetrock Lift Drywall Lift, 11 Ft Drywall Lift Rolling Panel Hoist Jack Lifter with Adjustable Telescopic Arm &Lockable Caster Wheel Sheetrock Lift Construction Tool

  • 【150Lbs Load Capacity】Made of heavy duty steel construction, The MAX load capacity of the dry wall lift panel hoist is 150 lbs..
  • 【Easy to Assemble & Disassemble】Easy to assemble, no tools required. Quick tool-free setup and disassembly for storage..
  • 【Adjustable Telescopic Arm and Panel Rotation】With adjustable telescopic arm and rotatable gypsum board( tilt 60° forward or backward and rotate 360°), the sheetrock lift is perfect for installing panels..
  • 【Lockable Wheel】With lockable caster wheel for easy rolling and stop. It is safe to use..
  • 【Application】This drywall lift is perfect for DIY and residential use and it allows one person working alone to install drywall walls and ceilings.The Panel Lift works quietly when raising and lowering the hoist which will not bother your neighbors..
Check Stock

Goldblatt 2 Pack Panel Carrier, Plywood Lifting Tool, Drywall Carrying Tool - Plywood Carriers Tool for Wood, Synthetic Cement Board - Clamping Thickness up to 3/4 inch

  • ...d a load of up to 200 pounds. Use this convenient sheet and panel mover to complete work faster.
  • 【Solid metal structure]】: This gypsum board fixture is durable and adopts a heavy-duty solid metal structure. The clamp and the handle arm are machined from aviation-grade aluminum, while the joints are made of solid steel bars. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality structure ensures that the tool can withstand violent lifetime use.
  • 【Self-adjusting clamp】: Autoly's device has a universal but simple design, allowing clamps to clamp various types of panels and sheet goods. Once you start lifting, the clamp will automatically adjust to the thickness of the panel or sheet. This innovative tool can fix up to two panels or sheets at the same time..
  • 【Easily carry on back】: It may be very difficult to carry slate, plywood and board. This handy tool can reduce your back pressure, allowing you to carry heavy objects with one hand. There is no need to bend down to lift the material from the bottom, just place the clip on the top edge of the material and lift it up. When you lift up, the self-adjusting clamp can hold the material tightly.
Check Stock

VEVOR Drywall Lift Rolling Panel, 16ft Sheetrock Lift Drywall Lift, 150lb Weight Capacity Panel Hoist Jack Tool, Steel Material w/Telescopic Arm & 3 Lockable Wheels, 48x192 in Plasterboard Size

  • 150 lbs Load Capacity: This drywall lift is made of heavy-duty carbon steel, ensuring its longevity and durability. With a maximum load of 150 pounds, this drywall rolling lifter panel is ideal for home and commercial use..
  • Adjustable Height & Length: The telescopic arm can be adjusted from 4 to 9.5 ft, perfect for installing sheets. And the sheetrock lift drywall lift can reach a height of 16 ft that can help you attach to the ceiling..
  • 60° Tiltable Rotation Panel: Our drywall lift panel hoist can tilt 60° forward or backward and rotate 360 degrees. Thus, it is widely used in flat and inclined ceilings..
  • Secure & Good Balance: The cradle of the drywall hoist features locking outriggers. The entire unit is supported by a broad tripod base with 3 anti-slip locking casters for secure mounting. Thus, it is flexibly moving but stable enough..
  • Easy Assemble & Operation: The drywall panel lift hoist is easy to assemble and disassemble without tools. The hoist jack lifter features labor-saving with a winch. It is perfect for DIY and residential use, allowing one person working alone to install plasterboard or plank..
Check Stock

Stark Professional Series 16 ft Drywall Rolling Lift Panel Hoist Jack Caster Construction Dry Wall Lifting w/Caster Wheel Yellow

  • Allows One Person Working Alone - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install....
  • Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel....
  • Contractor Grade - Crafted from extra-duty, all-welded steel, this drywall lift can hoist panels up to 4' x 16' in size, with a maximum load of 150....
  • Versatile Function - Features a 16' reach for flat ceilings and over 19' reach on walls/angled ceilings.
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage.
Check Stock

VEVOR Drywall Lift Rolling Panel, 11ft Sheetrock Lift Drywall Lift, 150lb Weight Capacity Panel Hoist Jack Tool, Steel Material w\\/Telescopic Arm & 3 Lockable Wheels, 48x192 in Plasterboard Size

  • 150 lbs Load Capacity: This drywall lift is made of heavy-duty carbon steel, ensuring its longevity and durability. With a maximum load of 150 pounds, this drywall rolling lifter panel is ideal for home and commercial use..
  • Adjustable Height & Length: The telescopic arm can be adjusted from 4 to 9.5 ft, perfect for installing sheets. And the sheetrock lift drywall lift can reach a height of 11 ft that can help you attach to the ceiling..
  • 60° Tiltable Rotation Panel: Our drywall lift panel hoist can tilt 60° forward or backward and rotate 360 degrees. Thus, it is widely used in flat and inclined ceilings..
  • Secure & Good Balance: The cradle of the drywall hoist features locking outriggers. The entire unit is supported by a broad tripod base with 3 anti-slip locking casters for secure mounting. Thus, it is flexibly moving but stable enough..
  • Easy Assemble & Operation: The drywall panel lift hoist is easy to assemble and disassemble without tools. The hoist jack lifter features labor-saving with a winch. It is perfect for DIY and residential use, allowing one person working alone to install plasterboard or plank..
Check Stock

Happybuy Motorized TV Lift 28-32 Inches TV Lift Mechanism Stroke Length 20 Inches Electric TV Lift Adjustable Height 29-49 Inches for TV LCD Plasma Monitor

  • Application: The Motorized Electric TV lift is suitable for 28"-32" TV, LCD, LED TVs and Monitors. With both remote and manual switch operation..
  • Motorized TV Lift: Stroke Length: 20" (500mm).
  • Minimum installation distance: 9.4 inches (240mm).
  • Durable: The TV lift is constructed from durable steel for strength and stability and is powered by our quiet 24V motor. The TV lift is equipped to provide the power and durability you need in your TV lift mechanism..
  • Ceiling / Wall Mounted TV Lift : The Motorized TV Lift can be used upside down - drop your screen from out of the ceiling. It can also be used wall mounted for training rooms..
  • Wide Application: With an LCD panel lift hiding your audio and video equipments when they are not in use, it is easy to clear up the clutter in the classroom, training room, conference room and meeting room..
Check Stock

Delgada Panel and Plywood Carrier (Adjustable Clamping Thickness), Heavy Duty Metal Gripper,Drywall carrying tool,Sheet Goods Carry Handle for Wood Glass

  • 【Function】The panel carrier clamps tool presents one of the most advantage tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. It can make people easily lift and carry panel goods,included MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods.
  • 【Anti skid frosting layer and thickened aluminum alloy】:Built in frosting layer, strong and durable, strong bite force, will not hurt the clamped object, high wear resistance.Aluminum alloy has low density, but high strength, close to or more than high-quality steel, good plasticity, can be processed into a variety of equipment, not easy to rust, durable.
  • 【High quality design】:Made of high-quality rubber, no peeling, no cracking, in line with human engineering mechanics, more labor-saving handling.Ergonomic design allows 1-person to lift and move sheet goods with one hand, simply automatically clamp the top of panel and lift to carry.
  • 【Wide appilcable range】: Automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time.
  • 【Warranty】 If you are not satisfied with the crimping tool which is not durable , please kindly contact us to return it for a full refund.
Check Stock

Breville Lift & Look 4 Slice Long Slot Toaster White

  • BAGEL & MUFFIN FUNCTION - The bagel setting works well for just toasting the sliced side of buns and bagels. Suitable for bagels and English muffins..
  • 4 EXTRA-WIDE SLOTS - Yabano toaster was built with food grade stainless steel, comes with extra 4 wide (1.4'') slots, suitable for different slices..
  • 7 SHADE SETTING - 7 level adjustable brown setting with 5 basic functions(toast, bagel, defrost, cancel and high lift). With high lift lever, you can remove slices of bread easily and to see toasting progress at any time..
  • 4 Slice Dual Independent Control Panels - 1800W Toaster with dual independent control panels, provide more choice for you. You can toaster 4 slice toaster at the same time, more efficient and save your time of breakfast..
  • WARMING RACK - Comes with removable and stainless steel warming rack, you can serve the toast straight from the machine or use it to enjoy a muffin or croissant. Compact design can save your space!.
Check Stock

Reaper's Stand (Reapers Motorcycle Club Book 4)

  • ... allowances make it easy to protect yourself as you work on motorcycles, either in a pro mechanical shop setting or in your home garage..
  • DURABLE CONSTRUCTION: The hydraulic ramp has a 1,000-pound weight capacity, so you can easily lift your bike. With its sturdy 11-gauge steel construction and high weight capacity, you can lift any bike for servicing with confidence and ease..
  • DIMENSIONS: The 293-Pound Ramp measures 8.5" – 34" tall x 81.25" long x 21.75" wide. The approach ramp measures 25.75" x 21.75" x 1/8" thick..
Check Stock

KAFLLA 16 FT Heavy Duty Drywall Lift 150LBS Sheetrock Hoist Holder Rolling Wheels Red Suitable for Home and Commercial Use

  • [Function] This drywall lift allows you to lift drywall and slate without help. The sturdy welded steel construction can support single drywall panels....
  • Application of various drywall boards up to 4 feet * 16 feet.
  • [Material] It is made of strong welded steel structure with powder coating surface, which is strong and stable and corrosion resistant..
  • [Easy Installation] Removable without tools. Perfect for home and commercial use..
  • [Notes] For safety reasons, the feet stop to hold the lift in the proper position..
Check Stock

Drywall Lift 11' 15' Lift Panel Hoist Dry Wall Jack Lifter Construction Tool Red

  • Contractor Grade - Crafted from extra-duty, all-welded steel, this drywall lift can hoist panels up to 4’ x 8’ in size, with a maximum load of 150 pounds, and is designed to last a lifetime.
  • Sturdy - A 5’ wide tripod base is supported by anti-slip, non-marring casters that won't damage floors.
  • a 3" triangular frame (in 4' sections) features oversized lock nuts and clevis pins at critical pivot-points, and the base includes a flip-down backstop to secure the lift's position for mounting.
  • Eliminate Risk- Eliminate risk of injury due to the heavy lifting, Prevent strain and injury by letting the lift do all the hard work.
  • Versatile - Features a 11’ reach for flat ceilings and over 13' reach on walls/angled ceilings.
  • the cradle rotates 360°, tilts 65° forward/backward and 10° side-to-side for use on both flat and sloped ceilings.
  • Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel support hooks.
  • it retracts to just 36" from the floor when tilted for easy loading.
Check Stock