Top Steering Cable End Fittings

Uflex M66X17 Rotary Replacement Steering Cable, 17'

Directly replaces Uflex, SSC6200, SSC6300, and 290 steering cables with no adapters.
Solid stainless steel engine output fittings for enhanced longevity and durability.
Note: Two M66 are needed with the T82FC system.

Directly replaces Uflex, SSC6200, SSC6300, and 290 steering cables with no adapters.
Solid stainless steel engine output fittings for enhanced longevity and durability.
Note: Two M66 are needed with the T82FC system.

Directly replaces Uflex, SSC6200, SSC6300, and 290 steering cables with no adapters.
Solid stainless steel engine output fittings for enhanced longevity and durability.
Note: Two M66 are needed with the T82FC system.

Directly replaces Uflex, Teleflex SC124 "The Rack" and Morse Command 200 steering cables with no adapters.
Solid stainless steel engine output fittings for enhanced longevity and durability.
Armor wrapped stainless steel core delivers the ultimate in efficiency with minimal lost motion.

Hydraulic Steering Kit without hoses (ordered separately ho51xx where xx equals hose length in feet).
Updated System includes Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing and NEW End Gland Sealing System for maximum protection from saltwater and compression set.
5 turns lock-to-lock with 1.7 Cubic Inch Displacement Helm (included) for maximum steering comfort.
Robust Barrel design and NEW graphics compliment new boats and motor packages..
48 Degrees of Tilt Articulation, 5 Positive Lock Positions and Factory Installed Lubrication ensure Smooth Operation and Feel.

Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.

Built and certified to meet safety & quality requirements established by the American Boat & Yacht Council (ABYC) and International Standards Organization (ISO).
Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.

Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....

Compatibility: These M10 Stainless Steel Thimbles fit for 3/8" Diameter Wire Rope and Cable.
Material: Made of durable high precision 304 stainless steel material which can work fine whenever in indoors, outdoors or a high salt environment.
Unique Design: The edges of the wire rope thimbles are polished and the surface is smooth which can keep no sharp and no burrs.
Function: Prevent crushing or overstressing wire rope at the terminal end which is used to protect the eye of a wire rope or sling. Help to keep cable from flatting around the eye causing the cable to weaken.
Application: Widely used in marine and industrial rigging and wire rope applications, Lifting and connecting, Wire rope fittings, Marine hardware fittings.

ღThis derailleur cable is made of 3 layer:outer double PVC plastic layer.
heated alloy steel bunch layer and PETT inner pipe,temperature resistance,intense heat resistant with rapid and sensitive performance..
ღIncluded 4mm Diameter cuttable shift cable housing - 2000mm,1550mm front inner derailleur cable and 2100mm rear inner cable,long enough to custom the shift cables length..
ღWorks For Shimano or SRAM Front & Rear Derailleur universal,BMX,Road bike,MTB bike,folding bike etc..
ღPackage includes: 1 pcs 2m shift housing cable + 2 pcs shift cables(front 1.55m rear 2.1m) + 10 pcs housing End Caps+ 4 pcs S-buckles + 4 pcs cable end crimps + 4 pcs isolation protection clip..
ღCome with other cable and cable housing fittings like brake cable cover ends S-buckles Wire cover ends, protect the bike from scratches and keep the bike cable neat..

Outboard Hydraulic Steering Kit Universally Fit Outboards up to 300HP.
Single or dual Station Steering For Boats Rated To a Maximum of 600HP (Total).
built-in lock valve to prevent the steering load from feeding back, also includes a relief valve provides over-pressure protection.
Adjustable O-ring seal fittings simplify the installation process and allow for simple reorientation of the fittings after installation.
made in high class stainless steel, aluminum alloy and copper， Kevlar reinforced Tubing.