Top Steering Cable Washer

The ROP Shop | Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE

  • The ROP Shop replacement Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE.
  • Specs - Sector Gear Dimensions: 8 1/2" Diameter. 11/16" Inner Diameter. 5 5/8" Length. 5/16" Thickness. Pinion Gear Dimensions: 11 Teeth. 1" Height. 1 3/8" Outside Diameter. Shaft Bushings Dimensions: 1 1/8" Diameter without Tabs (1 5/16" with tabs). 5/8" Inner Diameter. 7/8" Height. Refer to image 2 for more information.
  • Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings.
  • This kit is for/fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R, X165 Lawn Tractors.
  • Please be sure to check your part or model number to ensure this is the correct steering repair kit for your unit. Also, please note this may replace multiple parts numbers.
Check Stock

MOOG Steering & Suspension K90493 Ball Joint

  • STRONG AND DURABLE - Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • GREASEABLE SOCKET - Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • ABSORBS IMPACT - Belleville preload washer helps keep the bearing package tight as bearings wear.
  • RESTORES LIKE-NEW STEERING - Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
  • EASY TO INSTALL - Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
Check Stock

MOOG K9802 Ball Joint

  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
Check Stock

Muzata 20Pack Stainless Steel Angle Beveled Washer 25 30 35 Degrees ID 5/16” for Cable Railing Kit Deck Stair Railing Wood Metal Aluminum Posts T316 Marine Grade CR58

  • IMPORTANT to know before purchases - Angle beveled washer CR58 is ONLY compatible with 1/8" cable railing thread studs (Muzata CR42 CR50 CR52) and 3/16" cable railing kit CR53. Please note that ONLY thread studs require angled washers while the lag screw doesn’t. For other models and compatibility, please check picture 2 to find the matched washers and cable railing kits you need.
  • For 25-35 degree stairs - This T316 stainless steel angled washer is specially designed to act as a filler between the cable railing kit and the end post on 25 30 35 degrees staircase. The inner diameter of CR58 is 5/16", suitable for 1/8" 5/32” 3/16" cable railing kit with outside diameter less than 5/16" in 25 30 35 degrees staircase cable railing system. The package includes: 20 packs of angle beveled washers.
  • Easy Installation and marine grade -This angle beveled washer is perfect for DIY a clean and neat cable railing project. It is easy to install, especially for beginners. This angled washer is made of T316 marine grade stainless steel, which has excellent durability and strong resistance to rust and corrosion, and extreme weather.
  • Pre-Designed System - We pre-designed a cable railing system to help you construct a 1/8" cable railing system, which includes tension....
Check Stock

Steering Wheel Cover Heated - 12v Gray Soft Plush Warmer Car Steering Heater, 15inch Comfortable Steering Wheel Cover Protector, Suitable for Cold Winter,Gifts for Family & Friends

  • ➤Are you tired of driving for a long time in winter with cold hands? Our heated steering wheel covers provide warm comfort and soothing feeling in cold weather conditions..
  • ➤The new tangle-free coil design ensures your safety when heating the steering wheel. Built-in automatic thermostat to keep your hands warm and comfortable. Preheating in a few seconds-heating to 100-120⁰f in 90 seconds. Keep your hands warm and comfortable in the cold winter. Provides warm comfort and relief in cold weather conditions..
  • ➤New type of tangle-free wire-Our competitors use standard cable chargers that may get tangled on the steering wheel. Our new coil cable design will not get tangled or stuck on your steering wheel. Please unplug the power before driving..
  • ➤Comfortable grip plush foam padding provides ergonomic non-slip grip. Provides excellent traction and control for long-distance driving and daily commuting. Prevent the steering wheel from cracking and peeling off-keep the steering wheel as new. Protect your wheels from and oily fing-ers..
  • ➤Universal size-the most standard size ste....
Check Stock

Dometic SeaStar - SS13714 Steering Kit, Quick Connect, 14'

  • Safe-T QC replaces all SeaStar Solutions Safe-T helms made since 1968 with little or no dash modifications, (requires use of SSC62 QC or SSC61 QC II steering cable).
  • For single station use only, Safe-T QC accepts wheels up to 16” diameter, standard 3/4” round tapered steering shaft.
  • Quick-response of 3 turns lock-to-lock, stainless steel cable output ends.
  • Kits include: cable, helm, 90° bezel and hardware, fast, easy installation: uses simple snap-in cable connection, SeaStar Solutions Quick Connect (QC) cable, and industry-standard Safe-T mounting hardware.
  • Meets A.B.Y.C. standards and N.M.M.A. certification requirements.
Check Stock

MOOG DS800980A Steering Linkage Assembly

  • PRE-ASSEMBLED AND READY TO GO -- Includes all necessary MOOG tie rod ends for a time-saving solution that eliminates the need to identify, source and....
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate and Belleville washer ensures proper preload and consistent socket torque for the life....
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for lower friction and long....
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
  • PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability.
Check Stock

Dometic SeaStar Safe-T Quick Connect Rotary Steering Kit, SS13710, 10ft

  • Safe-T QC replaces all SeaStar Solutions Safe-T helms made since 1968 with little or no dash modifications, (requires use of SSC62 QC or SSC61 QC II steering cable).
  • For single station use only, Safe-T QC accepts wheels up to 16” diameter, standard 3/4” round tapered steering shaft.
  • Quick-response of 3 turns lock-to-lock, stainless steel cable output ends.
  • Kits include: cable, helm, 90° bezel and hardware, fast, easy installation: uses simple snap-in cable connection, SeaStar Solutions Quick Connect (QC) cable, and industry-standard Safe-T mounting hardware.
  • Meets A.B.Y.C. standards and N.M.M.A. certification requirements.
Check Stock

MOOG K3134T Ball Joint

  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates.
Check Stock

A-Premium Turn Signal Switch Cruise Control Switch Wipers Washer Hazard Multi-Function Combination Switch Compatible with Chevrolet Tahoe Blazer S10 Astro Suburban Express GMC Jimmy Safari Savana

  • ...】To "Turn Signal and Lane Change Indicator" ✔ "Headlamp High-Low Beam" ✔ "Windshield Wipers" ✔ "Windshield Washer" ✔ "Cruise Control(Option)" ✔.
  • 【Specification】Attachment Method: Bolt On.
  • Reference Part Number: DS698, 1S4778, 26036312, 26047330, 26054725, 26054727, 26083627, 26083629, 26091769, 26091771, D826A.
  • 【Buy with Confidence】Replacement Multifunction Combination Switch - Controls various functions including the hazards, turn signals, blinker, wipers, windshield washer, high beam head lights and cruise control. The multi function switch mounts to the steering column and includes the necessary wire harness to plug into your vehicles module..
Check Stock

WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application..
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span..
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening..
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it..
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18....
Check Stock

Barco Sin Timón (Plena)

  • 【COMPLETE ACCESSORIES】It comes with 13.5" Steering Wheel, Swivel Helmet, Standard 3/4" Tapered Steering Axle.
  • 16ft Steering Cable, Hardware, 90 Degree Bezel Kit..
  • 【High Quality Material】The steering kit is made of cast steel and 304 stainless steel seamless tube and corrosion resistant material, which is durable and stable. The rotary rudder is well welded, well polished, and of good size. The cables are made of stainless steel and high-quality rubber to ensure the surface is free from corrosion, rust, cracks and leaks and to keep the accessories shiny. Flat interface design, better and stronger marine steering system kit..
  • 【Easy To Install】The marine steering kit is easy to assemble, you don't have to configure the parts separately, it can be adjusted according to your needs..
  • 【Easy Operation】This rudder system is designed to minimize your effort to drive the boat and make the boat turn accurately to ensure you have a pleasant boating experience every time you use it..
  • 【Wide Application】Specially designed and developed for marine use. This outboard steering kit is suitable for mechanical/manual steering of yachts, fishing boats, electric push boats and other water vehicles..
Check Stock