Top Steering Knuckle Puller

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

6575 Hub Grappler Kit Universal for Vehicle Wheel Hub and Bearing Removal & Installation

  • ... to 2009 model year. Also includes tie rod/ball joint tool and two compatible with Ford axle installers. Comes with Operation Manual..
  • 【EXCELLENT FUCTION】-- This 6575 tool is a complete solution for that servicing wheel hubs and bearings on vehicle without removing the steering components or knuckle, eliminates unnecessary alignments or the use of a shop press. Minimize service time!.
  • 【SPECIFICALLY DESIGN】-- ①3/4'' custom drive screw, 5-10 times longer than similar designs, which with special equalizer washer provide smooth operation. ②Jaws designed and sized to property fit hub applications and is quickly located on the puller bar without the use of fasteners. ③ The puller is specifically designed to apply maximum force with minimal effort from an impact gun..
  • 【SUPERIOR MATERIAL】-- All parts made of solid carbon steel, proprietary heat treating extends its life while anti-rust finish resisting impact, corrosion and deformation. Mold-blown plastic case is convenience to carry and storage. keeps all tool great and organized..
Check Stock

WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application..
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span..
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening..
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it..
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18....
Check Stock

Powerbuilt 648460 Power Steering Pulley Puller, black

  • For removing pressed-on pulleys from power steering Pumps and alternators on or off vehicle..
  • For removing pressed-on pulleys from power steering pumps and alternators, on or off vehicle.
  • Four threaded holes on puller body allow narrow and wide jaw positions.
  • Heavy duty heat-treated alloy steel components.
Check Stock

Powerbuilt 648468 Tie Rod and Ball Joint Separator Silver 15/16 in.

  • For separating ball joint from steering knuckle.
  • Drop-forged, heat-treated alloy steel wedge tool.
  • Separates ball joint from steering knuckle.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

OTC 7403 Steering Wheel, Flywheel, and Pulley Puller

  • OTC's Steering Wheel, Flywheel and Pulley Puller works for a variety of applications.
  • Great for pulling steering wheels on most late model cars including domestic cars with or without collapsible steering columns.
  • Also functions as a standard 2/3-way puller for removing pulleys and small engine flywheels.
  • Cap screws included (pairs): 3/8-16 x 3-1/2 inches.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock

Powerbuilt 647088 Steering Wheel Puller Set, Black

  • Design to pull steering wheels on most domestic and imported vehicles..
  • Heavy-duty drop-forged steel construction.
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...ng to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set for replacing ball joints, widely uses for most imported and domestic minicar, compact car, mid-size car and light pickup truck. May not fit for most full-size car, mid-size and heavy-duty pickup, mid-size and heavy-duty truck..
  • Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for fr....
Check Stock

OTC (7927A) Steering Wheel Remover/Lock Plate Compressor Set

  • With this set it's easy to remove the steering wheels of most domestic and imported vehicles with or without tilt steering columns.
  • Also accesses the turn signal switch and SIR modules on current GM vehicles.
  • Includes steering wheel lock plate remover steering pivot pin remover for Saginaw steering columns and steering wheel puller.
  • Plus four sets of cap screws all contained in convenient plastic blow-molded case.
Check Stock