Top Step Cone Bit

[2022 Upgraded]Depvko 3Pcs Nail Drill Bits Set, 5 in 1 Drill Bits for Nails 3/32 Inches, Tapered Barrel and Cone Shape Carbide Nail Drill Bits for Acrylic or Gel Remover

  • What You Will Get? 1pc 5 in 1 Purple Nail Bit(Fine) 1Pc Tapered Barrel Carbide Nail Bit(Medium) 1Pc Cone Shape Carbide Nail Bit(Fine)|Shank size: 3/32".
  • Multi-function 5 in 1 Drill Bit: From the upper part of the base of the drill, the roughness changes from fine, to middle, to thick. No need to change another bit for different sizes during the work. Works for both left and right hand with 2 Rotate Direction.
  • Tapered Barrel Carbide Nail Bit: Includes a finer grit at the tip of the bit to avoid any damage to the cuticle and surrounding nail wall and a coarser grit towards the base of the bit..
  • Cone Shape Carbide Bit: Rounded at the top with skinny barrels to help reach the problem areas and to get close to the cuticles and sidewalls..
  • [TUNGSTEN CARBIDE] Made with the hardest material next to diamonds, which will provide durability for long-lasting use without the fear of getting dull, with flute-like cuts for excellent cutting and smoothing performance..
Check Stock

Neiko 10193A Titanium Step Bits Unibit Set 28 Sizes High Speed Steel Standard SAE Step Drill Bit Set Step Bits for Metal Unibit Step Drill Bits Industrial Unibit

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits allowing for you to spend more time working, than swapping out drill bits..
  • TITANIUM COATED HSS UNIBIT: Made of high-speed steel with titanium coating for added durability and bit life. Suitable to drill though plastic, aluminum, copper, stainless steel, and many other types of sheet metal..
  • SMOOTH DRILLING ACTION: Two-flute spiral design provides faster, smoother cutting without walking and a tri-flat shank to ensure a firm grip. Our titanium 2 step bits for metal are perfect for all your DIY, general building, and engineering tasks..
  • COMPLETE STEP DRILL BIT SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • STEP BIT SET CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill. Our unibit step drill bit is compatible with most drills on the market..
Check Stock

Hoppe's Boresnake Viper .22 - .225 Caliber Rifle, Clam E/F

  • Cone shaped bore guide on the leading end.
  • The world's quickest three-step bore shine.
  • 50% more brush cleaning power than the original BoreSnake.
  • Cone shaped bore guide for quicker alignment.
  • Designated lubrication zone on the handle.
  • brass weight on the pull cord is stamped with size.
Check Stock

NEIKO 10169A Step Drill Bit Set and Automatic Center Punch | 5 Piece, 41 SAE Sizes Total, 1/8” – 1-3/8” | Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits

  • HSS COBALT STEP BIT: Classic stepdrill bit constructed of high-speed steel with titanium coating for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • SPRING LOADED CENTER PUNCH: Our 5-inch automatic spring punch tool is a great tool for working with materials like wood, plastic, metal, and leather. Centering tool is spring loaded with an adjustable cap that accommodates any project..
  • INCLUDES: Four multipurpose dill bit in 1/4-inch shank and 3/8-inch shank with automotive center punch and a red blow mold carrying case for easy convince and storage..
  • MULTIPLE HOLE DRILL BIT: 4 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

30 Pcs Nail Drill Bits Set - 3/32 Inch Tungsten Carbide Ceramic Nail Drill Bits Acrylic Gel Nail Bit Diamond Cuticle Electric Nail File Cuticle Remover Bits Home Salon Manicure Pedicure Tools

  • ...t you need, which is convenient for individuals and families to use anytime and anywhere..
  • What You Will Get: This 30pcs nail drill bits sets include various shapes and sizes of ceramic, tungsten Carbide, diamond nail drill bits. Includes: Fine barrel bits, coarse barrel nail drill bit, safety drill bits, small cone bit, needle bits, flame bit, conical micro Bit, ball bits, bullet bits, nib bit, flat-end cylinder bit, cone bit, cleaning Brush, ect..
Check Stock

3 Pcs Step Drill Bit Set, High-speed Steel Drill bit, Titanium Coated Unibit Step Drill Bit, Two Flute Design Step Drill With Tri-flatted Shank, 1/4\ to 1-3/8\

  • HSS 4241: The step drill bit is made of strong HSS for outstanding durability and sharpness along with a titanium coating to ensure strong wear resistance, reduced friction. (For anti-rust, a small amount of rust Inhibitor will be coated with new items.).
  • 32 in 3 Drill Bits: Multi-size in one drill bit, holes of different diameters can be processed at one time. Replacing drill bits and loading a Center Hole are not required, efficient and time-saver..
  • 118°X Split Point： Unibit step drill bit with 118°X split point improves the cutting speed with self-centering and prevents walking to keep the step drill bit stable boosting the efficiency..
  • Stability and Safety: The step drill with tri-flatted shank fits into power tools chuck securely and eliminates slip and is compatible with all kinds of drilling machines. Step visibility is increased with laser engraved numbers..
  • Warm Tips: The step drill bit is a great helper to drill holes on Aluminum, Iron, Wood, Plastic material sheets. But Not the best choice for stainless steel, carbon steel, tile..
Check Stock

Yougfin Step Drill Bits with Automotive Center Punch,Unibit Titanium Coated High Speed Steel Step Bit Set for Hole Drilling,50 Sizes with Aluminum Case for DIY Lovers,5+1pcs

  • ..." no matter how much you think it's steady? Yeah, we have a tool for that. The automatic center punch has a heavy-spring action, and you simply place the tip where you want to drill, and it punches a slight indentation in the surface. Just enough so that the drill bit won't walk.
  • 【118° Split Point】：These step drill bits have a small point angle of 118° and require less pressure when centering in the material. The point starts drilling at contact, reducing friction, pressure, and heat. The larger the point angle, the higher the contact pressure and the centering in the material requires more pressure.
  • 【Double Flutes & Tri-Flatted】：These drill bits feature a special dual flute straight design for dependable performance and durability. And the shanks on these step drill bits have three flats that help prevent the bits from slipping in the drill chuck during drilling.
  • 【Product Feature】: Step drills are indicated in sizes. These sizes determine the diameters and the number of steps. Assortment comes with 5 drill bits of a combined 50-step sizes added：6-step drill（3/16" to 1/2"），9-step drill（1/4" to 3/4"），10-step drill（1/4" to 1-3/8"），12-step drill（3/16" to 7/8"），13-step drill（1/8" to 1/2"）.
Check Stock

HUAZHICHUN 6Pcs Drill Tap Combination Bit Set, 1/4\ Hex Shank High Speed Steel Drill Bit Spiral Screw Thread Taps Drill Bits Set HSS 4341 Imperial Counter Sink

  • This drill bit set includding -1/8" (3.175mm), 5/32" (3.97mm)， 3/16" (4.76mm)，1/4" (6.35mm)， 5/16" (7.94mm)， 3/8" (9.53mm)..
  • Self-centering point, do not need assistant center drilling or center punching..
  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • High hardness, rustproof, solid and durable.Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
  • Great for fast drilling, tapping,etc. And Fast replacement composite cone, uses drill edged principle. It ensures a longer service life from your bits..
Check Stock

NEIKO 10181A Step Drill Bit Set 3 Piece Spiral Grooved for Faster Drilling Step Bits for Stainless Steel Metal Wood Plastic Unibit Cone Drill Bits with 31 Step Sizes Total

  • PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
  • STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
  • SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 31 step sizes, each hole made with these step bits will be precise..
  • QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
  • INCLUDES: Each bit set comes with 3 drill bits of a combined 31 sizes to add to your drilling arsenal: 13 step drill (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2-inch) 6 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2-inch) and 12 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8-inch)..
Check Stock

ELECROW Sensor Kit Compatible with Microbit, Crowtail Programming Learning Electronics Kit, Coding Kit for Programmer (Micro:bit NOT Included)

  • [Micro:bit Starter Kit] The electronic starter kit for Micro: bit can work with you for a lot of interesting things and brings endless possibilities to your Micro: bit.  NOTE: Micro: bit board is not included..
  • [What You Can Get] This kit includes more than 20 modules like the buzzer, touch sensor, servo, ultrasonic ranging sensor, etc. The kit also provides you plenty of fun experiments so you can learn how the electric modules work and use it to build innovative works and plan out unique projects..
  • [Plug & Play Modules] All of the Crowtail modules have a standard 4 pin connectors, so it’s easy to plug them into the base shield to realize your ideas. Plug and play, no troublesome soldering and no complicated wiring..
  • [Step by Step] More than 20 creative tutorials teaches you to use the Micro: bit and sensor step by step..
  • [Crowtail] Crowtail is composed of a series of open source electronic sensor modules. Each electronic module is composed of a circuit board with integrated sensors and a standard 4pin connection terminal. It can be used without breadboards and other complicated operations. It is convenient and quick to build a project..
Check Stock

Cobalt Drill Bit Set - 13 Piece M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits.
  • TITANIUM COATED STRENGTH: Made of high speed steel with titanium coating for added durability and bit life.
  • SMOOTH DRILLING ACTION: Two-flute design provides faster, smoother cutting without walking and a tri-flat shank ensure a firm grip.
  • A COMPLETE SAE SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill.
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock