Top Step Drilling Cutter

Carbide Hole Saw, 1 Inch Cutting Diameter TCT Hole Saw, Tungsten Carbide Tipped Hole Cutter with Pilot Drill Bit for Cutting Stainless Steel, Metal Sheet and Aluminum Alloy

  • 【QUALITY MATERIAL】The cutting edge of the Tungsten Carbide Tipped Cutters(TCT hole saws) adopts industrial grade YG10X carbide,which can cut 5 mm stainless steel, 20mm cast iron, 3mm aluminum alloy, and 4mm hot rolled section steel..
  • 【FAST CUTTING】Our carbide hole saw has 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and efficient for cutting hard metal. Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications..
  • 【UNIVERSAL FIT】This TCT hole cutter is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. It can be used in many occasions and meets the needs of most people..
  • 【WARM TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed or punch the center hole in advance for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets..
  • 【BUY WITH Confidence】Ihomepark is committed to providing customers with high-quality products and thoughtful service. You can contact us at any time if you have any questions, and we wanna our customers to be 100% satisfied..
Check Stock

SaferCCTV 4Pcs Countersink Drill Bit Set 8pcs Wood Plug Cutter Drill Bit Set for Tapered 5/8 1/2 3/8 1/4 Woodworking Cork Drill Bit Knife

  • Wood plug cutter cutting set dowel maker cutting tools. High quality metal, use pay attention to rest, avoid burning knife, Oil can prolong life.....
  • Countersink Drill Bit Set: 4 Sizes in one drill bit set( 6#,8#,10#,12#), which meet your different needs perfectly.
  • Wood plug cutter drill bit apply to with a clamp or joint drilling machine, suitable for drilling in the hard wood and wood floor, machine screw for....
  • 8pcs Wood Plug Cutter Cutting Tool Drill Bit Set Uses: for bench drill and hand drill, recommended bench drill, easy to center.
  • Unique service can make you rest assured to buy--(1)Warranty 14 months, a warranty system, to provide repair parts. (2) Professional sellers, and....
Check Stock

Dremel 9910 Tungsten Carbide Cutter

  • The product is 1/8 Inch Diameter, Tungsten Carbide Cutter.
  • Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
  • Secure objects to a stable surface while working.
  • Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure.
  • Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics.
Check Stock

【2022 New Type】Mgtgbao Concrete Drill Bit Set, 10pcs 6MM Masonry Drill Bits Set Carbide Tip for Glass, Brick, Tile, Concrete, Plastic and Wood

  • ❶NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Cross cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❹NON-SLIP 1/4 HEX SHANK: 1/4 hex shank which makes the electric dril.
  • ❺WIDELY USED: It can be used for drilling walls, bricks, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

29-Pack Woodworking Chamfer Drilling Tools WENHUALI 6 Countersink Drill Bits 7 Counter Sinker Drill Bit 8 Wood Plug Cutter 3 Step Drill Bits and 3 Countersink Drill Bit with 1pcs Center Punch.

  • 29 Pack Woodworking Chamfer Drilling Tool Kit with a Handy Plastic Case– A Versatile tool set that would make a nice gift for woodworker, Dad, DIY lover, home hobbyist. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill..
  • 3 Pcs 1/4" Metric Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
  • within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
  • 7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug ....
Check Stock

Matework M35 Cobalt Step Drill Bit Four Spiral Flute Step Bit 1/4 -1-3/8 Wear-Resistant TiAlN Coated 3/8 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 19 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

12 pcs Concrete Drill Bit and Masonry Drill Bit Set，Carbide Drill Bit, Diamond Drill Bits and Tile Drill Bits Suitable for Tile/Concrete/Brick/Glass/Plastic/Wood etc.

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸15 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Matework M35 Cobalt Step Drill Bit Set Four Spiral Flute Step Bit 1/8 -7/8 Wear-Resistant TiAlN Coated 1/4 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 3Pcs 20 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

Hegebeck Forstner Drill Bit, 22mm Carbide Woodworking Hole Saw, Wood Drilling Cutter Boring Drill Bits with Round Handle, for Wood, Plastic, Plywood, Orange, 1pcs

  • 【Specifications】- Drilling diameter: 22mm / 0.87 inch.
  • 【Feature】- Hegebeck forstner drill bit is made by cemented carbide cutter and high-quality carbon structural steel (45# steel) body. Wood cutter has the specfictions like sharp edge, high hardness, accurate positioning, high precision, smooth cutting, impact resistance, high toughness..
  • 【Special Design】- The X-shaped design offers high visibility and a precise cutting effect. Sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation..
  • 【Advantage】- With highly hardness and excellent workmanship design, these wood auger drilling bit will reduce drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • 【Applications】- Forstner drill bit is for ordinary purpose. Can be used for drilling holes on wood and plastic products, furniture, door hinge.
  • Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc..
Check Stock

SHITIME 34 Pack Wood Working Chamfer Drilling Tools, 6 Countersink Drill Bit Set, 7 Counter Sinker Drill Bit Set, 8 Plug Cutters for Wood, 8 Drill Stop Bit Collar Set and 3 Step Drill Bits.

  • 34 Pack Woodworking Chamfer Drilling Tool Kit Include – A integral set of wood working tools for professionals or beginners. Pecfect gift for fathers, friends, carpenter and DIY lovers. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill..
  • 7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 2pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes within 3mm/0.12 inch....
Check Stock

SEARS CRAFTSMAN - Power Tool KNow How "RADIAL SAW" Drill Press Wood Lathe, Wood Shaper, Band Saw, Scoll Saw, Stationary Planers, Stationary Sanders, Woodworking Techniques. (Over 600 Professional Operations Described and Illustrated.

  • 34 Pack Woodworking Chamfer Drilling Tool Kit Include – A integral set of wood working tools for professionals or beginners. Pecfect gift for fathers, friends, carpenter and DIY lovers. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill..
  • 7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 2pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes within 3mm/0.12 inch....
Check Stock