Top Stinger Upgrade Kit

DE 75175 Replacement Battery for Streamlight Stinger Flashlights - 2000Mah 3.6V Nicad Battery

  • 20000mAh 3.6V NICad Replacement Battery for most standard stinger flashlight models..
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014. Does not work for the ultra or the headlamps. Full model number list included in the description..
  • The NiMH DE75175 is a 1 to 1 replacement of the pn75175 NiCad battery that comes with older streamlight models..
  • Up to 1,000 recharge cycles. 4-6 years shelf life. More than 2x the voltage of a typical alkaline primary cell..
  • Digital Energy has been manufacturing electronic accessories for over 20 years, and we pride ourselves on our customer service. If you have any questions or concerns please dont hesitate to contact us..
Check Stock

Fishing Hook Pike Stinger Rigs Multi-Depth Screw Rigging Kit with Sinker Weight for Soft Bait Fishing Lure swimbait shad (S1)

  • Stinger Rigs Multi-Depth Screw Rigging Kit With Sinker,Customise sink rate of soft lure,Adjustable weights (3 in pack),Strengthen squish rings withstand power over 80lbs,Stainless steel wire Will never worry broken problem..
  • Size: S/M/L Weights: S size/hook+5g 7g 10g ,M size/hook+5g 10g 15g ,L size/hook+5g 10g 20g Hook Size:#6, #1/0, #2/0(All the soft bait is only for show,if you want the bait please check our store).
  • The Multi-Depth CorkScrew Rig System allows the angler to customize the sinking rate and action of their chosen soft bait depending on the fishing environment. The Multi-Depth Screw System features unique interchangeable weights that allows the angler to adjust the weight and running depth of their rig. Simply slide off the weight and choose between one of the three different weights that come inside the pack..
  • Insert the screw to your chosen lure, attach and secure the twin-hook rig, slide on your chosen weight and finally lock it in place with a snap.You can then change the weights throughout the day to suit the depth and conditions you are fishing without having to re-rig your lure or change lures entirely..
  • Please Choose The Right Size Fit your Bait:The packing list for each size is as follows:S Size have 1 piece S stinger hook+5g ....
Check Stock

GEILIENERGY (2 Pack) 3.6V 2000mAh Digital Battery Compatible with Streamlight Stinger 75375 75175 XT Flashlight Battery

  • Chemistry: Ni-MH Voltage: 3.6V Capacity: 2000mAh Length:131mm (5.16 inch) High Capacity Battery.
  • Replacement For Streamlight 75375 75175 Flashlight Battery.
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014..
  • Compatible with: Streamlight 75175, 75300, 75301, 75302, 75303, 75304, 75305, 75306, 75307, 75308, 75309, 75310, 75311, 75500, 75501, 75502, 75503, 75504, 75505, 75506, 75510, 75511, 75512, 75513, 75514, 75515, 75516, 75521, 75522, 75523, 75524, 75525, 75526, 75531, 75532, 75533, 75534, 75535, 75536, 75710, 75711, 75712, 75713, 75714, 75715, 75716, 75732, 75733, 75734, 75735, 75736, 75737, 75810, 75812, 75813, 76000,76600..
Check Stock

HOLEWOR Gun Safe,Biometric Gun Safes for Pistols with Two Gun Capacity, Sturdy Fingerprint Quick Access Portable Handgun Safe Pistol Safe for Home Bedside Nightstand Car

  • TRIGGER GUARD PROTECTION – Stinger Gun Mount is an innovative firearm accessory that combines magnetic holder and trigger guard protection. It fully covers the trigger and provides additional protection from accidentally discharge. It is good to use in the car, truck, vehicle, office, cashier, bedside, doorway, desk, and table. The Stinger Gun Holder also helps to maximize the space allocation in your gun safe, and to configure the area where you keep your guns in a way that fits perfectly..
  • SUPERIOR STRENGTH & DESIGN – We use powerful neodymium, also known as rare earth metal, magnets hold up to 15 lbs. And the trigger guard provides extra support to your gun more securely. That means your guns will stick and stay put, even on a bumpy road. Each magnet is coated with a soft rubber coating to prevent scratches on your gun’s finish. The Gun Mount is arranged with unique Halbach array magnetism so the gun holster will not damage sensitive electronics on the mounting side..
  • SIMPLE & FAST INSTALLATION – The Stinger magnetic gun mount installs in minutes and with little effort. Use the included adhesive two-side tape to secure the desired position. And then drill in the 4 included countersunk screws. We also include anchors in the convenience h....
Check Stock

Stinger Safety Trigger Guard Protection Magnetic Gun Holder, Easy Conceal in Car, Truck, Vehicle, Desks, Safes, Walls, Handgun Rifle Shotgun Pistol Revolver, Gun Mount Rack (2 Pack)

  • TRIGGER GUARD PROTECTION – Stinger Gun Mount is an innovative firearm accessory that combines magnetic holder and trigger guard protection. It fully covers the trigger and provides additional protection from accidentally discharge. It is good to use in the car, truck, vehicle, office, cashier, bedside, doorway, desk, and table. The Stinger Gun Holder also helps to maximize the space allocation in your gun safe, and to configure the area where you keep your guns in a way that fits perfectly..
  • SUPERIOR STRENGTH & DESIGN – We use powerful neodymium, also known as rare earth metal, magnets hold up to 15 lbs. And the trigger guard provides extra support to your gun more securely. That means your guns will stick and stay put, even on a bumpy road. Each magnet is coated with a soft rubber coating to prevent scratches on your gun’s finish. The Gun Mount is arranged with unique Halbach array magnetism so the gun holster will not damage sensitive electronics on the mounting side..
  • SIMPLE & FAST INSTALLATION – The Stinger magnetic gun mount installs in minutes and with little effort. Use the included adhesive two-side tape to secure the desired position. And then drill in the 4 included countersunk screws. We also include anchors in the convenience h....
Check Stock

Epicenter: Why the Current Rumblings in the Middle East Will Change Your Future

  • BUNDLE INCLUDES: AudioControl Epicenter Bass Processor, Stinger SS600XS Amplifier Wiring Kit, and Car Toys Keychain. Car Toys is a USA AudioControl and Stinger Authorized Retailer and Certified MECP Installer (Installation not included). Manufacturer warranty protected..
  • EPICENTER INPUTS: Preamp Inputs: 1 (2 channels) / Maximum Input Level: 15Vrms / Input Impedance: 10k? /// EPICENTER OUTPUTS: Preamp Outputs: 1 (2 channels) / Maximum Output Level: 13.5Vrms / Output Impedance: 150.
  • EPICENTER PERFORMANCE: Total Harmonic Distortion: 0.003% / Frequency Response: 10Hz-100kHz / Signal to Noise: 110dB.
  • Nothing sounds better than an awesome recording played back on a kickbutt system. Unfortunately, the acoustics of your vehicle can take away from your systems performance. While AudioControl products do not change the laws of physics (although they act like they do), autosound enthusiasts have long known that AudioControl products “make good stereo sound better”..
  • FULL COPPER AMP KIT INCLUDES: 17FT Translucent Blue Power Wire, 3FT Translucent Silver Ground Wire, 17FT Translucent Blue Twisted Pair RCA Interconnects, 3FT Black flex loom tubing, 16FT Blue Remote Turn-on Wire, 20FT Translucent Speaker Wire, and 1pc AGU Fuseholder..
Check Stock

GEILIENERGY (2 PCS) 3.6V 3000mAh NIMH Battery Stick for Streamlight Stinger LED HP, XT,75175 PolyStinger, Pelican M9

  • Chemistry: Ni-MH Voltage: 3.6V Capacity: 3000mAh Length:131mm (5.16 inch) High Capacity Battery.
  • Replacement For Streamlight 75375 75175 Flashlight Battery.
  • Works with all standard stinger flashlights, Streamlight Stinger, Stinger LED, Stinger LED HP, Stinger DS LED HP, Stinger HP, Stinger XT, PolyStinger, PolyStinger LED and PolyStinger DS LED flashlights, even the 15 year old 75014..
  • Compatible with: Streamlight 75175, 75300, 75301, 75302, 75303, 75304, 75305, 75306, 75307, 75308, 75309, 75310, 75311, 75500, 75501, 75502, 75503, 75504, 75505, 75506, 75510, 75511, 75512, 75513, 75514, 75515, 75516, 75521, 75522, 75523, 75524, 75525, 75526, 75531, 75532, 75533, 75534, 75535, 75536, 75710, 75711, 75712, 75713, 75714, 75715, 75716, 75732, 75733, 75734, 75735, 75736, 75737, 75810, 75812, 75813, 76000,76600..
Check Stock

Stinger Quick-Load Magnetic Gun and Magazine Holder, Pistol / Handgun Magnetic Gun Mount for Vehicle, Quickdarw Gun Holder for Car, Car Gun Magnet, Hold Extra Magazine, Concealed Gun Magnet Mount

  • QUICK-LOAD AND FAST DRAW DESIGN – The unique design allows you to load the mounted pistol in seconds by holding and pushing the pistol forward..
  • BALANCED STRENGTH DESIGN – The Stinger Quick-Load Gun Mount use high quality magnets rated 15 lbs that provides a good balance between secure holding and quick drawing. It can holds any handguns or pistols very securely in your car even on a bumpy road..
  • SIMPLE & FAST INSTALLATION – The Stinger Quick-Load Gun Magnets can be installed in minutes with little effort. Use the included adhesive two-side tape to secure the desired position. And then drill in the 4 included countersunk screws. We also include anchors in the convenience hardware kit in case you need them..
  • MOUNT ANYWHERe – The Stinger Quick-Load Tactical Magnet is a compact design that can be mounted anywhere with a flat surface such as closet, bedside nightstand, under office desk, cashier, on the wall, in the gun safe, or anywhere inside your car or truck..
  • WORKS WITH MOST GUNS – The Stinger Quick-Load Magnet Gun Mount is a must-have gun accessory. It is compatible with most pistols include Glock, Smith & Wesson, Browning, Walther, Taurus, Beretta, Sig Sauer, Colt, Ruger, Kel Tec, Heckler & Koch, Ressi, FN Herstal, and many ot....
Check Stock

SafeAMP 12-Volt Charger for Streamlight Rechargeable Flashlights

  • Compatible with most Streamlight Flashlights and Charger Bases and Holders except ultrastinger fast charger and hid litebox.
  • Fits most Stinger series flashlights, including Stinger, Stinger LED, Stinger HP, Stinger HPL, and more.
Check Stock

STREAMLIGHT Stinger Smart Charger Holder with 12V DC Car Charge Cord - Intended for Use with Stinger Series Flashlights

  • RECHARGE YOUR FLASHLIGHT - This bundle includes Streamlight Stinger Smart Charger Holder (75105) and Streamlight 12V DC Car Charge Cord (22051).
  • STINGER SMART CHARGER - This is a dual power input charger.
  • It features a micro USB port and also accepts 12V DC car charge cord and 100V/120V AC home....
  • CHARGING TIME - Charging Time is 3 to 7.5 hours depending on power source and battery capacity.
  • COMPATIBILITY - The Stinger Smart Charger Holder works with Stinger series flashlights, including Stinger 2020, Stinger DS LED HL/LED HL, Stinger....
  • 12V DC CAR CHARGE CORD INCLUDED - Replacement power cord for most Streamlight rechargeable flashlights.
  • It features 12V DC input and lighter plug.
Check Stock

Radio Navigation & Instrument Flying

  • Perfect GPS upgrade for your STINGER ELEV8 or HEIGH10 Radios.
  • No cellular signal required with the SD card makes traveling easy.
  • Built-In routing options, traffic history, and points of interest make travel easy when calculating your route.
  • Over 1000 built-in waypoints and landscape data right at your fingertips.
  • Detailed landmarks, lane guidance and complex road junctions make it easy to navigate using the intuitive touch panel control.
Check Stock

Stinger Front Bumper with Winch Plate Fit 07-18 Wrangler JK

  • STINGER BAR - This rock crawler bumper's benefit is the bolt on stinger bar, which will help to prevent your JK from flipping forward when coming down....
  • PERFECT FOR OFF-ROAD USE - EAG JK stinger front bumper features 9.500 lb D-ring shackles on beefy mount, a built-in winch plate and OE fog light....
  • HEAVY DUTY CONSTRUCTION - EAG manufactures their JK stubby stinger bumper from 5/32" steel sheet and 2" x 0.120" seamless tubing for superior strength....
  • CUSTOM FIT - EAG stinger bumper fits for 2007-2018 Wrangler JK. Does not fit for 2017 JK Rubicon Recon..
  • SIMPLE BOLT-ON INSTALLATION - EAG engineered this JK stinger bumper to be a direct bolt-on replacement, no drilling or cutting require..
Check Stock