Top Stm32f103cblack Pill

WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display

• DC Power and Probe are Not included. With Automatic mode, conventional mode and single trigger mode. Included 10:1 BNC probe and use 9V DC power charger (NOT Included), Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display.
• Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value.
• Adopts ARM Cortex-M3 processor (STM32F103C8).
• Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error.
• Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate.
• Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave. Pls contact us if have any quality issue and need support, will reply within 24hours, refund or replace with a new one.

HGLRC FD445 Flight Controller Stack Forward F4 Mini FC BLHeli_32 FD45A 4in1 2S - 6S Electric Speed Controllers for RC Racing Drone Quadcopters

• High-end quality Highest quality MOSFETS , Betaflight OMNIBUSF4 V6 STM32F405 MCU , MPU6000 accelerometer/gyro (connected via SPI) , On-board Betaflight OSD.
• High integrationIntegrated 5V/3A BEC Output , Support 2S - 6S power input, Easy and quick OSD configuring Integrated with STM32F405R6T6 chip, compatible with Betaflight and Cleanflight (support DHOTS150/300/600/1200) ESC with high operating speed, which achieves excellent flight experience. Moreover, it can generate powerful calculating ability and velocity , easier, stable and smooth flight experience.
• Higher frequency Forward F4 FC has a more powerful STM32F405RGT6 MCU operating at a higher frequency , making everything run smoothly . You can add GPS and anything else you like freely because the CPU utilization is lower ..
• Why Choose Us We are the Original HGLRC manufactory , If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours . Choose us risk free today. Click the Orange Button to Buy Now :).

BIGTREETECH Octopus Pro V1.0 Controller Board New Upgrade with Octopus 32bit Motherboard Compatible TMC5160 Pro Stepper Driver Support Powerful DIY for 3D Printer Main Chip is STM32F446ZET6

• 【Main Control Chip】The main control adopts the 32-bit ARM Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180 MHz. The external....
• 【About Using Firmware】Support the use of Marlin2.0, killper, RRF three types of firmware. Please note: STM32F446ZET6 MCU flash memory space is....
• 【Stepper Motor】The Octopus Pro 3D printing motherboard can support up to 8 stepper motor drivers, and the motor drive power supply supports up to....
• 【Support Proximity Sensor】Support proximity sensor, jumper optional pull-up resistor, support more models. This function can be sensed without....
• 【High Temperature Test】The onboard MAX31865 can support 2/4-wire PT100/PT1000 temperature measurement without welding (the soldering resistance....

TCMMRC FC F4 Flight Controller 2-6S OSD BetaFlight 20x20mm for FPV Racing Drone

• VERY EASY TO SOLDER, The F4 Flight Controller has multiple ports, no soldering, just plug in the port line. This is convenient for beginners..
• FAST RESPONSE TIME AND EXCELLENT SHOCK ABSORPTION,MPU6000 gyro with SPI bus mode.
• HIGHER RATE PID100MHz STM32F411 main control chip.
• CLEANER IMAGE DISPLAYOSD chip and 5V BEC on board.
• REASONABLE LAYOUT TO AVOID JUMPERSAccording to the installation requirements of most pilots, the functional pads are grouped together.

1.3 Inch IPS TFT LCD Display Module 240x240 ST7789 SPI Interface for Arduino STM ESP8266 (with pin Header)

• The color level is displayed to make the TFT LCD color more realistic, the brightness is good, the contrast is high, the layering is strong and the color is bright..
• Driver ST7789,sorpport 4-line SPI, save IO interface, especially suitable for arduino、ESP8266.
• High resolution, application on mini WIFI TV、WIFI Internet weather clock、Smart wear、IOT etc..
• you can contact us for reference schematic diagrams and PCB source files, STM32 and TKM32F499 reference programs and other related materials.

GoolRC Radiolink Byme-D Flight Stabiliser Flight Controller Gyroscope Self-Stabilization Balance for RC Airplane Fixed Wing Delta Wing Paper Plane SU27 F22

• Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
• IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
• 2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
• Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
• INAV Target: MATEKF411TE ( INAV4.1 or newer).

adidas Mens Yeezy Boost 350 V2 FW3042 Citrin - Size 10

adidas Originals Mens NMD_Xr1 Lace Up Sneakers Shoes Casual - Black - Size 9.5 D

Matek Systems F411-WTE 100MHz STM32F411CEU6 Flight Controller Built-in OSD 2-6S for RC Airplane Fixed Wing DIY Accessories Parts …

• Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
• IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
• 2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
• Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
• INAV Target: MATEKF411TE ( INAV4.1 or newer).

Makerbase MKS Robin Nano V3 32 Bit Control Board 3.5inch TS35 Touch Screen for Creality Ender 3 V2 Pro 3D Printer Mainboard Replacement Parts Marlin 2.x Klipper with 5pcs TMC2209 WiFi Module

• ...n Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse..
• MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input..
• DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use..
• EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings.
• BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of motherboard to compile the related firmware..

FYSETC 3D Printer Vorn 2.4 Big Dipper Motherboard New Upgrade Silent Control Board Based on Due 3 Mini 5+ WiFi with TMC2209 Stepper Motor Drivers Onboard for Vorn V2.4 V0.1 3D Printer CNC Machine

• ...n Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse..
• MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input..
• DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use..
• EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings.
• BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of motherboard to compile the related firmware..

Creality CR-10 Smart Motherboard CR-10 Smart 3D Printer 32-bit Silent Mainboard with TMC2208+A4988 Stepper Driver V1.2 Silent Mother Board for CR-10 Smart

• The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved..
• Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not....
• Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch....
• Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI.