Top Stop tail turn Lights

Partsam 2x Red/White 39 LED Stop Turn Tail Stud Lights Replacement for Jeep CJ YJ JK Truck Trailer Boat RV Hardwired

  • Each one is equiped with 39 Super bright LEDs: 12 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 6 White LED as License Plate....
  • This square stop turn tail light is Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, etc. Also you may need to DIY to suit for....
  • Partsam Lights are impact resistant and less susceptible to shock damage.
  • Each LED is directly wired and water-tight sealed..
  • Size: 170mm x 145mm x 60mm (6.7'' x 5.7'' x 2.4'').
  • Wire Connection Tips: Black Wire is the Ground.
  • White Wire,Red 12 LED works with low brightness as Tail Light and bottom white 6 LED works as License....
Check Stock

Partsam 20 x 3/4" Round Led Light Trailer Boat Marker Clearance High Low 3SMD Clear Lens, 3/4" round LED combination turn signal running lamp fender lights 3-WIRE assembly Taillights(10Red+10Amber)

  • Package includes 20Pcs(10Pcs Red and 10Pcs Amber) 3/4" Led Marker Lights 3 Wires in Clear Lens, 3 diodes per light, Fix 3/4" Hole.
  • Sealed Light, 3 Wires Setup, High Low Function.
  • 3/4" amber led marker lights 3 wres in clear lens: 3/4" round LED lamp for use as a combination turn signal and running lamp, can be installed anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp(one function at a time). It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
  • 3/4" red led marker lights 3 wres in clear lens: Clear Lens Red Mini 3/4" Stop Turn Tail Lights 3 LED with Rubber Grommets,very bright for it's size. Dual brightness. install with a rubber mounting grommet and requires a cutout hole of 3/4" diameter. These 3/4" led lights come with 3 wires (white wire ground, black wire is tail light/marker light/clearance light/running light and red wire is for stop and turn functions). This light is DOT approved as your only tail light or turn signal.
  • These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet....
Check Stock

Partsam 6 Inch Oval Red Led Trailer Tail Lights Smoked Sealed Grommet Mount Stop Turn Tail Brake Marker Lights for Trailer Truck RV Grommet and Plugs Included Waterproof 12V (Pack of 6)

  • ...sibility conditions to light up the rear of your vehicle or trailer.
  • Dimensions: 7 1/4" x 3" x1"(with grommets) and 6 3/8" x 2 1/5"x1"(without grommets), a hole about 6 3/8" need to drill to install it.
  • EASY INSTALLATION - Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer lights to be installed in both horizontal and vertical orientations. Powering the oval tail lights off of the included industry standard three prong harness, one can have these tail lights installed in no time.
  • DURABLE WATERPROOF DESIGN - Each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough weather.
  • Package and Warranty: Package includes 6PCS 6 inch Smoked red oval LED tail lights,6Pcs Rubber Grommets and 6Pcs industry standard 3-prong plug with attached wiring Pigtails.
  • We truly offer 1 year warranty! If have any questions or issues about our smoked trailer lights lights, Please feel free to us and we will reply in 24 hours.
Check Stock

Blazer International C6304 LED Wireless Magnetic Trailer Towing Light Kit

  • Includes (2) stop/tail/turn LED lights, transmitter with standard 4-flat wire vehicle trailer light connector and trilingual instructions.
  • Provides over 65' of wireless operation and DOT compliant stop, turn, and tail functions for your trailer or towed vehicle.
  • Features a low battery indicator in one light (Requires (8) AA batteries, not included).
  • Non-scratch, heavy-duty magnetic base for secure mount.
  • Sonically sealed polycarbonate lens eliminates moisture and corrosion.
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on.
  • These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the....
Check Stock

LIMICAR Trailer Lights, Upgrade IP68 Halo Glow Trailer Light Kit, Brake Stop Turn Tail License Plate LED Trailer Lights with 25ft Trailer Wiring Harness Kit for Truck Marine RV Boat Camper

  • PREMIUM MATERIAL: Trailer Lights includes 2pcs Rectangular combination stop / brake / reverse / tail / turn signal halo tail lights, 2pcs amber clearance lights, 25ft 4 pin wire harness, license plate bracket and mounting mounting screw, bolt and hardware, 4pcs reflective stickers. The tail lights are made of high quality ABS housing + PC lens, shockproof and dustproof, ensures long lasting durability..
  • PRACTICAL FUNCTIONS: Both of the LED trailer lights used as stop, turn, brake, tail, rear reflector, side reflector and side marker light. Besides, the left light has a license plate illuminator function. "Halo-Glow" design gives a new look for your vehicle. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability..
  • WATERPROOF RATE: IP68. Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc. Upgraded lampshade surface without screws, the LED trailer lights are completely welded together, the LED trailer lights are completely welded together. Featured great sealed and waterproof performance..
Check Stock

Partsam 4Pcs 4" Inch Round Led Stop Turn Tail Back-up Reverse Fog Lights 12 LED Include Lights Grommet 3-Prong Wire Pigtails Round LED Trailer Tail Light Kit for Truck Trailer RV( 2 Red + 2 White)

  • Package includes 2 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation.
  • These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights).
  • Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug.
  • These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install.
  • IP65 waterproof and please do not use it under water.
  • Easy to install: White is the ground, red is the high brightness and Black for low brightness.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led trailer tail lights are compatible with almo....
Check Stock

Partsam 4 Pcs 4-1/3\ Red/Amber Led Oval Side Marker and Clearance Lights with Chrome Bezel, Oval led Trailer Marker Lights, Trailer Parking and Turn Signal Lights, Aux Stop Turn Tail Brake Lights

  • 2 Pcs Red & 2 Pcs Amber 6-3528-SMD LED MARKER / CLEARANCE LIGHT is Supplied with decorative snap-on chrome plated bezel.
  • 4-1/3" ( L) x 1-4/5" (W) x 7/8" (H) (approx.) and The surface mount design features the industry standard 2.8" centres..
  • Used as side marker light, Clearance Light, Cab marker light, Identification Light, turn signal lights, Parking lights, running lights, stop lights, brake lights, tail lights, stop turn tail lights etc..
  • The PC lens, housing and LED circuitry are all sealed together by expoxy in a single unit to ensure a permanent, weather durable and waterproof seal..
  • Wiring Tips and Functions: Black is the ground wire, Red is high brightness, white is low brightness and function as running light, side marker lights or clearance lights etc..
  • Fitment: Universal for any 12V truck trailers, such as Semi-Trucks, Semi-Trailers, Duallys, Service Trucks, PickUp Trucks,Vans, Horse Trailers, Utility Trailers, Boat Trailers, Utility Trucks etc..
Check Stock

Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit

  • Activates a trailer's stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system - simply snap on included current sensors.
  • Use when: trailer has more than 1 light assembly per side and is equipped with multiple clearance or running lights.
  • if tow vehicle may tow a variety of trailers.
  • Re-settable short circuit/overload protection - guards itself and the tow vehicle from shorts and wiring install mishaps.
  • rated at 4.2 amps for turn/stop circuits, 7.5 amps for taillight circuit.
  • Works on all vehicle types including standard, PWM and/or multiplex systems, ensuring full brightness of the trailer lights during operation.
  • ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system.
  • Isolates trailer light operation from tow vehicle's electrical system.
  • 5 amps for taillight trailer circuits. Works with low side Switched vehicles.
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

Partsam 2Pcs LED Triple Tail Lights 45 LEDs, Rectangle Vertical or Horizontal Mount LED Trailer Camper RV Tail Lights Stop Turn Tail Backup Reverse Lights Taillights w/ Black Base - Red/Clear Lens

  • Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black recessed base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light.
  • These Recessed Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector).
  • This Led triple tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application.
  • This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights.
  • NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal.
  • Overall dimensions: Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 13.4 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit.
Check Stock

AUXMART Universal LED Trailer Tail Lights, 16 LED Smoked Stop Brake Turn Reverse Tail Lights Rear Combination for Jeep Wrangler YJ TJ CJ Truck Trailer Boat RV Flatbed, 12V

  • ...op turn signal light work with most 12V vhicles.
  • Unique black bezel color with smoked lens, give you the latest look and attitude. Suitable for Truck, Trailer, SUV, RV, Camper, Boat, Flatbed, Bus, Forklifts, Pickup, Coaches and Wrangler CJ YJ TJ, etc..
  • Ultra Bright LED --- 16 ultra bright LEDs, brighter than factory lights. Provides tail lights, brake lights, turn signals and reverse lighting functionality (No license plate light).
  • 12 red for brake/turn/tail functions, 4 white LEDs for revers functions..
  • Sealed & Waterproof --- 16 LED dual color trailer tail light is made of high quality ABS housing and PC lens, and completely sealed in epoxy to resist corrosion & moisture.
  • effectively withstand the invasion and corrosion of sand, dust, dirt, water and other impact of inclement weather..
  • Easy Installation --- 3 studs can be mounted directly on any flat surface. And it with 4-color coded wire connection for easy installation.
  • Black wire is ground, white wire is reverse light, red wire is brake light, brown wire is tail light..
  • You Will Get --- 2 x 12V 16 LED combination tail lights.
  • Professional installation is strongly recommended (Not including instructions, Please note that some modification or drilling is required for installation on Wranglers and Jee....
Check Stock