Top Straight Bevel Gear Suppliers

Boston Gear HL148Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375\ Bore, 16 Pitch, 12 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth

12 teeth for use with HL148Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion.

Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..

Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..

Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..

Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
Made of 45# steel with high wear-resistance, strong and durable..
Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Scope of application: for all kinds of mechanical transmission occasions..

Replacement blade A for sharp accurate cutting with Logan Straight Cutter, Straight/Bevel Cutter, Rabbet Cutter, and V-Groove Cutter.
For Foamwerks Straight Cutter, Straight/Bevel Cutter, Rabbet Cutter, and V-Groove Cutterby Logan Graphic Products Inc..
FOR USE ON STANDARD FOAMBOARD ONLY and not for cutting plexi, mats, hard plastic or for use on regular mat cutters.
MUST USE FOAMBOARD OR MATBOARD UNDERLAYMENT WHILE CUTTING for a smooth clean cut and for proper blade maintenance.

Efficient 27.6cc 2-cycle trimmer is a versatile tool for regular homeowner or part-time professional use.
Comes with a heavy-duty T35 trimmer head from Husqvarna.
Robust unit delivers excellent power while the extended straight shaft greatly improves the unit’s reach and durability.
Engine features a SmartStart system to ensure the unit starts up quickly and with minimal effort.
The intuitive controls, including choke and purge, are easy to understand.
Convenient stop switch automatically resets to the ‘on’ position to simplify startups.
High-torque bevel gear is positioned parallel to the ground for efficient cutting performance.
Backed by a 2-year limited warranty for homeowner use.

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

This large-capacity precision mat cutting system creates professional beveled mats for all your framing projects..
Bevel cutting head and mat knife for straight cuts as well as a parallel mat guide to maximize cutting potential and options.
Open ended machine means the length of a cut can be infinite by cutting and sliding the material through the length of the machine. Not limited to 32 inch length cut..
Works with standard thickness 4-ply mat board only and uses Logan 270 blades.
Includes 1 cutting board, mat guide, bevel cutter, straight cut knife and instruction manual.