Top Strength Fastener
Sunex 9715A Metric Raised Panel Combination Wrench Set 14 Piece
- BOX END OFFSET BY 15 DEGREES: Provides clearance for your fingers and other obstructions near the fastener..
- RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off..
- CHROME PLATING: For strength and the prevention of rust, corrosion and deformation..
- ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength..
- DURABLE CANVAS POUCH: Included for easy storage and transportation..
Check StockDual Lock Tape 1in x 2in 10pcs, Dual Lock Heavy Duty Mounting Tape,Interlocking Tape Reclosable Fastener Self Sticky 3550CF Dual Lock Strip for EZ Pass Mounting Tape Black
- 【DUAL LOCK DATA】: 3550CF dual lock reclosable fastener. 1in x 2in 10 pieces black color. This dual lock has 150N(1in x 2in sample) lock strength, the mounting tape sticky side adhesion strength is 189N(1in x 2in sample). Hold up to 93°C(200°F) high temperature resistance..
- 【DUAL LOCK ADVANTAGE】: The interlocking mushroom-shaped heads dual lock tape that easily slide over each other. Mushroom dual lock has 5 times lock strength of normal hook and loop tape.up to 1,000 openings and closings before losing 50% of original tensile strength..
- 【DUAL LOCK QUALITY】: Dual Lock Reclosable Fastener designed with acrylic heavy duty mounting tape features strong adhesion, durable bond that is heat, chemical and UV resistant. With Dual Lock Reclosable Fastener, there is no need for any drilling, screwing or sewing tools which makes for quick installation. Best suited for indoor and outdoor use..
- 【DUAL LOCK USE】: The Dual Lock tape is great for small jobs, prototyping and design evaluation.EZ pass mounting tape heavy duty.Securing fabric to furniture cushions. Point of purchase display and signage. General industrial applications. Marine and specialty vehicle applications. Alternative solutions for zippers, screws, buckles, etc..
Check Stock3M Hook/Loop Fastener TB3571/TB3572, Black, 1 in x 10 ft
- Trial bag version (1 in. x 10 ft.) of 3M Loop Fastener SJ3571 and 3M Hook Fastener SJ3572.
- Great for small jobs, prototyping and design evaluation.
- Woven nylon loop fastener provides great design flexibility and fast product assembly.
- High performance acrylic-based adhesive offers excellent shear strength, chemical and solvent resistance, and bonds to a variety of substrates.
- Alternative solution to zippers, screws, snaps and more.
- Features excellent temperature resistance of 200°F (93°C).
Check Stock3M 51111976487 Hook/Loop Fastener TB3526N/TB3527N, Black, 1 in x 10 ft
- Trial bag version (1 in. x 10 ft.) of 3M Hook Fastener SJ3526N and 3M Loop Fastener SJ3527N.
- Great for small jobs, prototyping and design evaluation.
- Woven nylon hook fastener provides great design flexibility and fast product assembly.
- High performance rubber-based adhesive offers fast tack, very good shear strength and bonds to a variety of substrates, including plastics.
- Alternative solution to zippers, screws, snaps and more.
- Features good temperature resistance of 120°F (49°C).
Check StockGEARWRENCH 11mm 12 Point Ratcheting Combination Wrench - 9111
- 72 tooth ratcheting box end needs a minimal 5 to move fasteners vs. 30 for standard wrenches.
- Off-corner loading design on box end provides better grip and reduces fastener rounding.
- Thin head and beam provide greater access in confined work areas.
- Size conveniently stamped on both ends of the beam for quick identification.
- Manufactured from alloy steel for better strength and longer tool life.
- Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
- Sleek head design enables access to tight spots where a ratchet will not fit.
- Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock3M Dual Lock Reclosable Fastener SJ3560 250 Clear, 1 in x 4 Ft
- 3M SJ3550 Dual Lock 250 Reclosable Fastener is a general-purpose clear reclosable fastener with 250 stems per square inch, an engaged thickness of 0.23 inches (230 mils) and a closure life of 1,000..
- Type 250 stem density fasteners can mate to type 170, 250 or 400 fasteners (the higher the combined number the greater the closure strength). Mushroom-shaped stems on one side of the fastener interlock with identically shaped stems on the other side for 5X greater closure strength than hook and loop..
- Dual lock type 250 fasteners are designed to bond to metals, glass, and medium-to-high surface energy plastics and paint. They can replace conventional fasteners such as screws, clips, rivets, snaps, hook and loop and bolts in many applications where access or repositioning is needed..
- unlike products where there are a separate hook and a loop side.
- so rolls are typically cut in half and then mated or connected so a 10-foot roll would be used as two 5-foot strips..
- Carrier/Backing: polypropylene. Adhesive: acrylic (300 LSE). Release Liner: clear polyolefin film. Thickness: 140 mils (carrier, adhesive) 4 mils (liner). Service/Operating Temperature: up to 220F. Engaged Thickness: 230 mils. Pins: 250 per square inch..
Check StockGEARWRENCH Ratcheting Combination Wrench 16mm, 12 Point - 9116D
- 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches.
- Off-corner loading design on box end provides better grip and reduces fastener rounding.
- Thin head and beam provide greater access in confined work areas.
- Size conveniently stamped on both ends of the beam for quick identification.
- Manufactured from alloy steel for better strength and longer tool life.
- Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
- Sleek head design enables access to tight spots where a ratchet will not fit.
- Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check StockGEARWRENCH 39 Pc. 1/2' Drive 6 Point Standard & Deep Impact Metric Socket Set with 44 Pc. 3/8' Drive 6 Point Standard & Deep Impact SAE/Metric Socket Set
- Made from chrome molybdenum alloy steel (CR-MO) for exceptional strength and durability.
- Off-corner loading design reduces fastener rounding.
- Impact Sockets built from chrome molybdenum alloy steel (CR MO) for exceptional strength and durability.
- Off corner loading design reduces fastener rounding.
Check StockGEARWRENCH 39 Pc. 1/2' Drive 6 Pt. Impact Socket Set, Standard & Deep, Metric - 84948N and GEARWRENCH 4 Pc. 1/2' Drive Impact Extension Set 3', 5', 10' & 15' - 84950N
- Made from chrome molybdenum alloy steel (Cr-Mo) for exceptional strength and durability.
- Off corner loading design reduces fastener rounding.
- Manganese Phosphate coating to resist corrosion.
- Flex socket design provides more access to fasteners in tight confines.
- Chrome molybdenum alloy steel (Cr-Mo) for exceptional strength and durability.
- Off-corner loading design for reduced fastener rounding.
Check StockSunex Tools 1874 1/4' Drive Master Fractional and Metric Impact Sockets Set
- CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
- RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
- CHAMFERED OPENING: Quickly aligns fastener to socket..
- DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
- HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
- MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
- SAE: 3/16” to 9/16” and METRIC: 4mm to 15mm.
- FULL COMPLEMENT OF EXTENSIONS: Provides access to virtually all recessed fasteners..
- UNIVERSAL JOINT: Adapts any socket for use in swivel applications..
Check StockGEARWRENCH 39 Pc. 1/2' Drive 6 Point Standard & Deep Impact Metric Socket Set - 84948N & GEARWRENCH 39 Pc. 1/2' Drive 6 Point Standard & Deep Impact SAE Socket Set - 84947N
- Made from chrome molybdenum alloy steel (CR MO) for exceptional strength and durability.
- Off corner loading design reduces fastener rounding.
- Manganese phosphate coating to resist corrosion.
- Made from chrome molybdenum alloy steel (CR-MO) for exceptional strength and durability.
- Off-corner loading socket design for better grip and reduced fastener rounding.
- Manganese phosphate coating for corrosion resistance.
Check StockGEARWRENCH 19 Pc. 1/2' Drive 6 Point Deep Impact SAE Socket Set - 84934N and GEARWRENCH 19 Pc. 1/2' Drive 6 Point Standard Impact SAE Socket Set - 84932N
- Chrome molybdenum alloy steel (CR MO) 1/2” drive impact sockets with exceptional strength and durability.
- Off corner loading technology to reduce fastener rounding, even after repeated use.
- Black phosphate corrosion resistant coating, laser etched with high visibility markings and hard stamped labels.
- Chrome molybdenum alloy steel (CR-MO) for exceptional strength and durability.
- Off-corner loading design reduces fastener rounding.
- Manganese phosphate coating to resist corrosion.
Check Stock