Top Stroke Length

EZTAT2 Avant V2 Rotary Tattoo Machine - 6 Adjustable Strokes 2.5mm-4.0mm Tattoo Pen Kit with Coreless Motor for Permanent Makeup Micro Cartridge Needles Supply Black

  • WHAT IS Avant V2 - Avant V2 is an adjustable stroke tattoo gun made of precision Aircraft aluminum, built-in EZ custom coreless motor, powerful, durable and stable, providing you with a better experience..
  • ADJUSTABLE STROKE PEN MACHINE - Avant V2 is the first tattoo machine developed by EZ that allows tattoo artists to quickly adjust the stroke length. It has six stroke length options of 2.5mm, 2.6mm, 2.8mm, 3.2mm, 3.6mm, 4.0mm, suitable for different styles of tattoos (TATTOO,Permanent Makeup and SMP)..
  • EASY TO USE - The long handle with engraving is designed to simulate the grip and feel of the actual pen, increasing the friction and not easy to slip off, with good balance, making your tattoo process more smooth and comfortable..
  • BEST CHOICE - This rotary tattoo machine is simple and classic to connect the tattoo power supply through the RCA interface. It can be used for a long time, preventing interruption of the tattooing process. The transmission is more stable and compatible with all standard ink cartridges, the first choice of tattoo artists..
  • ONE YEAR WARRANTY - Within 1 year from the date of purchase, we will provide free warranty service due to the failure caused by the machine itself..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

Peak Solice Pro Cordless Tattoo Machine Pen, Professional Lightweight Equipment for Tattooing, Fully Adjustable Stroke, Up To 10 Hours of Power, Pro Tattoo Supplies for Artists, Black

  • CORDLESS TATTOO PEN MACHINE – Tattoo any style without limits using the Solice Pro pen tattoo machine. A cordless tattoo machine, offers a fully adjustable stroke length for all tattooing styles..
  • FULLY ADJUSTABLE STROKE – Adjust your stroke on the fly with this professional tattoo machine pen. A simple turn of the stroke adjustment knob, change your stroke from 2.4mm up to 4.2mm..
  • 10 HOURS OF POWER – The Solice Pro tattooing machine offers up to 10 hours of tattooing power with the included PowerPack battery pack. This pen tattoo machine battery is detachable, easily switch to a wired setup..
  • LIGHTWEIGHT DESIGN – In a lightweight tattoo machine design weighing only 7.2oz (with the PowerPack battery) makes this tattoo equipment comfortable to hold and easy to handle..
  • PRO TATTOO SUPPLIES – 1 PowerPack battery, 1 RCA Module, 2 Battery Pack Converters (3.5mm + RCA inputs), 3 O-rings, 2 Allen keys, 1 spare flywheel, 1 USB-C charging cable, 1 RCA cord..
Check Stock

C16-06389 Truck Camper Shell Lift Supports Struts Shocks Gas Spring 14 Inches 2 pack

  • 【Part Number】: C16-06389, C1606389. Force: 24 pounds of pressure..
  • 【Exact fit 】original equipment design ensures easy installation and precise operation.End Fittings: fits 10mm nylon ball sockets.
  • 【Dimension】Extended Length A [in]: 13.98, Compressed Length B [in]: 8.90, Stroke C [in]: 5.08..
  • 【High Quality】After QPQ processing, the stroke rod surface light clear, small friction resistance, no blunt, anti-rust, anti-wear to extends....
  • 【Vehicle Location】: Gas spring lift struts for rear lift doors of truck caps.Easy to install..
Check Stock

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Craftsman Bolt-on Jig Saw Attachment

  • Tool-less blade change makes swapping tools quick and easy.
  • .5 inch stroke length means efficient operation.
  • 0-2800 Stroke Per Minute range delivers smooth, fast cuts.
  • Compact design allows access and accuracy even in the tightest spaces.
Check Stock

Craftsman CMXPTSG1010NB Air Hammer, Red and Black

  • Medium Stroke: Hammer mechanism produces medium stroke length for balance of power and size for most jobs.
  • Helpful Features: Anti-slip rubber handle to reduce vibration.
  • Output Specification: 2800 blows per minute.
  • Average Air Consumption: 4.4 SCFM at 90 PSI.
Check Stock

Craftsman 12 Volt Lithium-Ion Auto Hammer

  • Medium Stroke: Hammer mechanism produces medium stroke length for balance of power and size for most jobs.
  • Helpful Features: Anti-slip rubber handle to reduce vibration.
  • Output Specification: 2800 blows per minute.
  • Average Air Consumption: 4.4 SCFM at 90 PSI.
Check Stock

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat up to 25hp Auxilary Trolling Mount

  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs.
  • Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric).
  • Applications : Fits most style of 2-stroke outboard motors.
  • Easy to install : 5 vertical running position lock bars.
  • locking the safety knobs to keep the bracket in place.
  • holds the outboard motor up or lowers....
  • Note : please be careful of the sharp edge when you install.
  • Please feel free to contact us if you have any question about the product. We would try....
Check Stock

BOSCH GST18V-47N 18V Barrel-Grip Jig Saw Bare Tool Blue

  • POWERFUL 18V JIG SAW DESIGN: delivers an easy-handling barrel grip with up to 2,700 no-load strokes per minute.
  • EXTENDED UPFRONT SOFT-GRIP AREAS: provides user comfort and control, with a small barrel-grip circumference.
  • LARGE DIE-CAST ALUMINUM FOOTPLATE: includes a no-mar plastic overshoe for greater stability.
  • VARIABLE SPEED-CONTROL: provides a dial to control operating speed, from 550 up to 2,700 no-load strokes per minute.
  • LONG STROKE LENGTH: has about a 1 In. stroke length for a cutting capability up to 4-1/2 In. in wood and up to 7/8 In. in aluminum.
Check Stock

Bosch SHX3AR75UC Ascenta 24 Stainless Steel Fully Integrated Dishwasher - Energy Star

  • POWERFUL 18V JIG SAW DESIGN: delivers an easy-handling barrel grip with up to 2,700 no-load strokes per minute.
  • EXTENDED UPFRONT SOFT-GRIP AREAS: provides user comfort and control, with a small barrel-grip circumference.
  • LARGE DIE-CAST ALUMINUM FOOTPLATE: includes a no-mar plastic overshoe for greater stability.
  • VARIABLE SPEED-CONTROL: provides a dial to control operating speed, from 550 up to 2,700 no-load strokes per minute.
  • LONG STROKE LENGTH: has about a 1 In. stroke length for a cutting capability up to 4-1/2 In. in wood and up to 7/8 In. in aluminum.
Check Stock