Top Strong Countersunk

20 Pcs Black Corner Braces 2x2 Inch Steel L Bracket Heavy Duty Joint Right Angle Shelf Support Corner Braces for Shelves, Wood Furniture, Cabinet with Screws (20 Pack)

  • Black Steel L Brackets Sizes: 2″ L x 2″ H(50mmx50mm), Metal Size: 0.8″ Wide x 0.12″ Thick, Hole Quality:4, Hole Dia: 0.18”/4.5MM.
  • ROUND CORNER AND COUNTERSUNK HOLE DESIGN: Our corner brackets for shelves has round ends and countersunk allow l bracket to be flat after screw are installed, with no protrusions to cause scratches..
  • 20 PCS HEAVY DUTY L CORNER BRACE: This black corner brace is made of heavy duty steel and could maximum support weight of 35lb for a pair of this L bracket. Our corner brackets come with a L pattern and could work perfectly for installing shelves, furniture and wall shelves, and so on..
  • EASY TO INSTALL: Even if you are not good at DIY, it is easy to install. The package includes the stainless steel screws. You just need to make sure that the corner brace brackets are perpendicular to the furniture..
  • WIDE APPLICATION: The small solid and strong L corner braces can be used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc..
Check Stock

SEA FLO 4\ - 8\ White Circular Non Slip Inspection Hatch w/Detachable Cover (8\)

  • 4''Marine Screw Out Deck Plate Inspection Hatch Plastic Access Boat.
  • Strong ABS Molded Design, Anti-Aging, Anti-Corrosive, Ultraviolet Resistant.
  • Inside Diameter: 4"(101mm).Outside Diameter: 5.6"(143mm).
  • Durable Water-Tight O-Ring.Reinforced design with a non-slip surface.
  • Easy to install, Pre-drilled countersunk holes (screws not included).
Check Stock

4PCS Deep Carry Pocket Clip Compatible with Benchmade 535 with screws Stone Wash & Black Color

  • Deep Carry Pocket Clip Allow Your Folder To Sit Deep Inside Pocket.
  • Made Using Grade Metal,Durable and Strong.
  • Package includes: 2 PCS Black+ 2PCS Stone wash color Deep Carry Pocket Clips,total 4pcs with screws.
Check Stock

Bestgle 15PCS Folding Flip Top Hinge Sewing Machine Hinge Flush Butler Hinges for Workbench /Furniture/Table/Cabinet/Door

  • Overall size: 80 x 30 x 1.5mm (L * w * h).
  • Widely Application. Suitable for desktop, folding tables, sewing machine tables,dining table,wardrobe and other folding furniture..
  • Strong corrosion resistance. Made of high quality metal, durable, strong toughness, wear and corrosion resistance..
  • Countersunk screw hole design. sinking design, after the installation does not scratch the hand, does not hurt the hand, is convenient to use safely..
  • Open and smooth, no obstruction.The hinge link is reinforced, safe and stable. Flexible rotation, 180 degrees, 90 degrees flexible rotation..
Check Stock

cSeao 110pcs Stainless Steel Finishing Cup Countersunk Washers Assortment Kit, 6#/ 8#/ 10#/ 12#

  • Used for RC Airplanes Boats Cars FPV Helicopters.
Check Stock

H&H M2 Countersunk Washers,Aluminium Alloy,PK20,Wine Red

  • 20 pcs Drone Countersunk Cup for M3 screw.
  • M3 Special countersunk washer for your DIY Drone, make your FPV frame more unique and popular.
Check Stock

Earl Diamond Brushed Stainless Steel Hinges, 4\ X 4\ Door Hinges (Pack of 2)

  • HINGES: Constructed soild stainless steel, strong toughness ensuring high quality and longevity, Full mortise design.
  • HARDWARE: brushed stainless steel with 16 matching screws for installation..
  • NODE: Five knuckle - Smooth operating plain bearing hinge,removable pin..
  • MATERIAL:heavy-gauge material for added strength, suitable for doors up to 88 lbs (max. 40KG)..
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

23 Pack Woodworking Chamfer Drilling Tool, 6pcs Countersink Drill Bit, 7pcs Three Pointed Countersink Drill Bit, 8pcs Wood Plug Cutter, with L-Wrench and Automatic Center Punch

  • 【Professional Woodworking Set】- Woodworking chamfering drill set includes 6pcs 1/4" hexagonal shank HSS 5-edge 90 degree countersunk bit, 7pcs triangular high-speed steel countersunk bit with L-shaped wrench.
  • 8pcs cork milling bit and 1 automatic center punch.
  • 【Three Pointed Countersunk Drill Bit】- It's made of high-speed steel, with good wear resistance and durability, including 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm pilot holes, large chip flutes and five chamfers for speed up cutting speed and easier to discharge wood chips.
  • 【Wood Plug Cutter】- 3/8" shank wood plug cutter bit set is made of durable carbon steel, used for tapered 1/4.
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Extremely Strong Neodymium Cup Magnets - 90 lbs Holding Force - 1.26' Industrial Strength Round Base Rare Earth Magnets - Countersunk Hole for #10 Bolt, 3 Mounting Screws Included

  • GREAT EXTREMELY STRONG NEODYMIUM MAGNETS - For holding or attaching objects to surfaces with magnetic properties. Single round magnet's measures 1.26" (32mm) in DIAMETER and 0.31" (8mm) in HEIGHT. PULL FORCE: 90 LBS (3 Mounting Screws Included).
  • SUPER EASY MOUNTING: COUNTERSUNK HOLE for easy use with #10 SCREW! This allows the screw head to sit below or flush with the magnets surface. The counter sunk hole on the magnet works with flat head screw to affix onto walls or cabinets.
  • NI+CU+NI TRIPLE LAYER PLATED, THE BEST COATING AVAILABLE. Tight tolerance +/-0.002". MAX OPERATING TEMPERATURE: 80°C/176°F MAGNETIZED THROUGH THICKNESS so that the N and S poles are on the opposite flat surfaces.
  • LIMITLESS USES: Base Rare Earth N52 Magnets with Countersunk Hole for #10 Bolt USE FOR A WIDE VARIETY OF PROJECTS. Industrial N52 Strength magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. Rare earth cup magnets will hold up some of your heavier hand tools quite well and very easily. The applications of this round base magnet include magnetic holding, lifting, antenna Mounting, positioning, meteorite hunting, tool magnetizer, magnetic t.
  • HIGHEST QUALITY WITH A WARRANTY: X-bet MAGNET makes top neodymium magnets....
Check Stock

Gusset Commer Grade .25x1.25x8

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock