Top Structural Applications

Muzata Cable Railing Post Black Stair 42\x2\x2\ Stainless Steel Square Pre-Drilled 30 Degree Angle Holes Top Mount Weldless PS01 BA4L, PT1 PT3 PT6

  • Staircase applications- This square cable railing post (black finish) is designed for 42" commercial cable railing projects. It is pre-drilled with 12 pairs of 30 degrees angled holes to work on stair sections and save your labor. It can act as structural end post and middle post on staircases, compatible with staircases of 25 to 35 degrees. This cable railing post comes with both flat and curved brackets to fit flat and round handrails.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. It is important to consult local building offices about the rules since there might be different requirements in some states.
  • BlackCool System -- We pre-designed a BlackCool cable railing system to help you get a fully customized project. The system includes black posts PS01 PS02 PS32, black handr....
Check Stock

Method Race Wheels 312 Matte Black 18x9\ 5x150\

  • Solid A356 aluminum with T6 heat treatment construction. Tough 6 windowed point design with debossed METHOD logos.
  • Street-Loc V.3 lip with undercut simulates true beadlock wheel.
  • Replaceable MRW stainless steel lip bolts with optional colors available. Bolt-on center cap — push through cap for 8 lug applications.
  • Strong 2500 lbs. to 3640 lbs. load ratings. Industry’s best lifetime structural warranty.
  • Hub centric fitments for common applications.
Check Stock

Simpson Strong-Tie SDWS16300QMB .160 x 3' QuikGuard Framing Screw 250ct

  • Equipped with a larger head with under head box-nibs to provide increased strength in structural applications.
  • QuikGuard provides great protection both in indoor and outdoor applications.
  • Application: multipurpose wood-to-wood including framing, indoor/outdoor projects.
Check Stock

Simpson Strong-Tie SDWS16212QMB .160 2-1/2' QuikGuard Framing Screw 250ct

  • Equipped with a larger head with under head box-nibs to provide increased strength in structural applications.
  • QuikGuard provides great protection both in indoor and outdoor applications.
  • Application: multipurpose wood-to-wood including framing, indoor/outdoor projects.
Check Stock

25 pcs M16-2.0 X 105mm DIN 6914 / ISO 7412 / EN 14399-4 Metric Heavy Structural Hex Bolts Class 10.9 Steel Galvanized

  • Heavy hex structural bolts are designed to withstand the load of a steel-to-steel connection..
  • Commonly used in structural steel joint in construction and building applications..
  • Class 10.9 steel is an alloy steel, quenched and tempered, with a minimum tensile strength of 1,040/mm-2 (Mpa)..
  • The washer face under the head provides a precision bearing surface..
  • The chamfered point improves engagement with a nut or pre-tapped hole..
Check Stock

General Hydroponics FloraGro 2-1-6, Use With FloraMicro & FloraBloom, Provides Nutrients For Structural & Foliar Growth, Ideal For Hydroponics, 1-Quart

  • General Hydroponics FloraGro 2-1-6 delivers nutrients for structural and foliar growth.
  • Combine FloraGro 2-1-6 with FloraMicro and FloraBloom to create a nutrient mix tailor-made for your plants and their phase of growth (seedling, cutting, structural, flowering, or fruiting).
  • Ideal for hydroponic applications and as a nutrient supplement for potted plants.
  • To ensure the best results, always add FloraMicro to fresh water first, stir well, then add FloraGro and/or FloraBloom.
Check Stock

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Ramset Powder Fastening Systems 2-1/2-Inch Washer Pin w/Ramguard 100 per Box

  • ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to....
  • Coated to improve corrosion resistance in treated lumber and other applications.
  • Washer increases bearing surface against the material to be fastened.
  • Designed for use in treated lumber applications.
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

CECCORP C-Tough Epoxy Glue (8.5 Oz Combined) 2 Part Adhesive – for Metals, Aluminum, Glass, Fiberglass, Masonry, Wood, Stones, Rigid Plastics (P.V.C – ABS) – Not Suitable for PTFE.PP.PE & Rubbers

  • ★ COMMON APPLICATIONS - Anywhere that you would need an extraordinarily strong structural bond with long working time. C-Tough can be used in Household, Industrial, Automotive, Aircraft, Marine, Construction, Building, Transportation, Wood Working, Hobby Applications, and more..
  • ★ COMMON USES - Aluminum/Wooden Boat Repair, Knife Handle Making/Repairing, Fiberglass Patching/Repairing, Golf Reshafting, Sword Handle Assembly/Repair, Furniture Repair, Any Kind of Structural Bonding on Aluminum Parts, Canoe Repair, Composite Bonding, Gun Stock Assembly/Repairs, Pen Manufacturing, RC Airplane Engine Mount Repair, Infilling Cracks/Knots, Guitar Repair, Manufacturing Flies for Fly Fishing.
  • ★ PRODUCT FEATURES - Extremely Durable, Has a Consistent Thickness, is Water and Impact Resistant. Shock Resistant while being able to withstand Vibration, Contraction, and Expansion. After it cures it can be Impact and Shock Resistant in below zero temperatures and has a very strong Chemical Resistance. C-Tough has an easy 1:1 volume mixing ratio and allows for a long working time with a 24-hour full-cure time..
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock