Top Super 8051

kuman Compatible For Arduino Raspberry pi Sensor kit 37 in 1 Robot Projects Starter Kits with Tutorials Compatible for Arduino RPi 3 2 Model B B+ K5

  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for ARDUINO, BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+.
  • Complete Update and common models for arduino Mega 2560 starter kit.
  • Great sensor kit with tutorials compatible for Arduino and raspberry pi..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED..
Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

  • ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
  • ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
  • ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
  • ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
  • ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check Stock

SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with Arduino R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current.
  • Equiped with high-current relay, AC250V 10A.
  • Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • Indication LED's for Relay output status.
  • Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch).
Check Stock

Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10

  • 【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
  • 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
  • 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
  • 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
  • 【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).
Check Stock

Professional T-wide Adjustable Trimmer Blade for the 5 Star Series Detailer and Cordless Detailer Li for Professional Barbers - Model 2215 Silver

  • ★FITS Model: Wahl Detailer #8290, 5 Star Razor Edger #8051, G-Whiz #8986, Hero #8991, Sterling Definitions #8085. 5 star Detailer Corded. Cordless....
  • ★PROFESSIONAL PRECISION: The double wide Adjustable Trimmer Blade set is intended for professional use only and is designed to deliver the sharp....
  • ★Zero Gap: This blade is designed to provide an extremely close trim. Sharpness blade for smooth cutting Ideal for facial hair and design.....
  • ★Packing: Package contains Professional Double Wide Adjustable Trimmer Blade set. Not include the screw..
  • ★ PREMIUM SUPPORTS - Friendly warranty support without any other costs needed. Fast and easy-to-reach Customer Service to solve your problems within....
Check Stock

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

  • This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
  • Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
  • With a detachable lattice plastic storage box, it is very easy to store and carry..
Check Stock

Wahl Professional Pro-Set Tool for Adjusting Trimmer Blades on the 5-Star Detailer Retro T-Cut and Cordless Detailer Li - Model 3315

  • This standard replacement blade is designed to fit the Wahl Detailer #8290, The 5 Star Razor Edger #8051, G-Whiz #8986, and Hero #8991, and the....
  • The Adjustable T Shaped Trimmer Blade is intended for professional use only and is designed to deliver the sharp performance that experts demand..
  • This blade is specifically designed to provide an extremely close trim. It creates a crisp, clean line that will keep your customers coming back. The....
  • Ideal for facial hair and design, it allows you to get creative while keeping clean lines. The t-wide blade is 1/4" wider than Wahl's standard....
Check Stock

Wahl Professional Adjustable T Shaped Trimmer Blade for Detailer 5 Star Series Hero Razor Edger and G Whiz and Sterling Definitions Trimmers for Professional Barbers and Stylists - Model 1062-600

  • PROFESSIONAL PRECISION: From Wahl Professional's commercial grade line of products, the Adjustable T Shaped Trimmer Blade delivers the sharp....
  • FITS YOUR FAVORITES: This blade is designed to fit the Wahl Professional Detailer (8290), 5 Star Series Hero (8991), Razor Edger (8051) and G Whiz....
  • PRODUCT SPECIFICATIONS: Package contains 1 Wahl Professional Adjustable T Shaped Trimmer.
  • Silver in color, includes blade oil, screws and....
  • PLEASE NOTE: Due to continuous improvement, the product appearance may slightly vary from the product images on this listing.
Check Stock

Standard Premium Blade set Adjustable 2 hole Replacement Blade #2215 for Wahl Detailer Corded Wahl Detailer Cordless 5 star Series Detailer 8081 Double Gold Blade

  • COMPATIBLE CLIPPER BLADES: This standard replacement blade is designed to fit the Wahl Detailer #8290, The 5 Star Razor Edger #8051, G-Whiz #8986, and....
  • High-quality materialsl: Carbon-steel for dependable, ceramic blade , Close-cutting T-blade,Sharpness blade for smooth cutting ..
  • ✔ It's intended for professional/daily use, great for Professional Stylists and Barbers, for hair cutting-Fades, Tapers, Flat Tops Performance. Time....
  • ✔ ACCURATE Zero Gap: This blade is designed to provide an extremely close trim. Sharpness blade for smooth cutting Ideal for facial hair and design.....
  • Easy installation:This replaces the small moving cutter blade. Can also be used to upgrade steel blades to ceramic blades. Simply replace the steel....
Check Stock

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • 5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
  • Equiped with high-current relay, AC250V 10A.
  • Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.
Check Stock

Professional T Wide Replacement Blades Set #2215 for Wahl Hair Trimmers 8081 Assembled 1 Fixed Carbon Steel Blade with 1 Ceramic Moving Blade Compatible with Wahl 5 Star Detailer Gold

  • ➤Fits Model: for 5 Star Wahl Detailer #8290,#8081, for 5 Star Razor Edger #8051, for G-Whiz #8986, Hero #8991, for Sterling Definitions #8085..
  • ➤Professional Precision: The double wide Adjustable Trimmer Blade set is intended for professional use only and is designed to deliver the sharp....
  • ➤Accurate Zero Gap: This blade is designed to provide an extremely close trim. Sharpness blade for smooth cutting Ideal for facial hair and design.....
  • ➤Direct replacement for a proper fit and easy installation, quality materials used, 100% tested before shipping..
  • ➤Packing: contains Professional Double Wide Adjustable Trimmer Blade set. Not include the screw..
Check Stock

ACEIRMC Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE R3 for MEGA2560 Nano

  • Received great ideas from our customers and adopted in this upgraded kit. Removed useless modules heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. or download the tutorials online from the official website..
  • 100% compatible with Arduino official IDE, Raspberry Pi and STM32..
Check Stock