Top Surface Mount Lights

Partsam 2pcs 6" Amber LED Rectangle Tail Stop Marker Light Trailer Truck RV 3 Wires 21LED, 6x2 Rectangular Led Clearance Lights, 2x6 Big Side Marker Lights

  • Package includes 2 Pieces 2x6 inch Amber Rectangular Trailer Marker Led Lights 3 Wires Surface Mount, 21 Led diodes per amber light.
  • Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
  • Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
  • Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
  • This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
  • Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on....
Check Stock

Konrali 14Pcs Double Bullseye Led Marker Lights 10 LED, 2x4 Rectangle Led Trailer Marker Lights Red/Amber Surface Mount 12V Airstreams RV Camper Led Marker Clearance Lights Sealed (7 Amber+ 7 Red)

  • This listing features for 7 pieces double bullseye amber trailer marker lights and 7 pieces double bullseye red trailer side marker lights, 14 pieces in total. Each rv clearance light includes 2 pieces stainless steel screws for surface mounting.
  • Dimensions: 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" approx. and fit on standard 3" centers.
  • The rectangular tiger eye led marker light features a replaceable, snap-on lens, and is hardwired with 2 wires to mount to any surface: black is ground and red is positive.
  • Each 2x4 led marker light come with 10 super bright LEDs and operate within a wide 9-14.8V DC range. Rather than double bullseye led marker lights, people also call these rectangle led trailer marker lights as "tiger eye led marker lights" or "double bubble led marker lights". You can truly mount this rv camer marker light anywhere on the truck.
  • As many bullseye marker lights on market have the wires exit from the corner, our led markers have the wires exit form the middle. Also they come with the led chips, not the led diodes, which will be brighter and have longer lifetime. These 12V rectangle LED lights are universally for most trucks, trailers, pickups, RVs, Campers etc. esp. ideal for cab and sleeper panels.
Check Stock

Partsam Rectangle 14x Amber/Red 4" Truck Boat Trailer Side Marker Indicator lights 8-LED Surface Mount

  • Light Size: 4" x 1.6" x 0.7" and Mounting holes spacing: 3.15in. approx.,operates form 9-16Volts.
  • Each Clearance Light is built in 8 LEDs miro reflectors, provide you super night visability on the road.
  • HARDWIRED WITH TWO WIRES: BLACK IS GROUND, YELLOW IS POSITIVE.
  • This Rectangle led trailer light is surface mount and you can mount anywhere as long as the size fit.
  • Usage: side marker lights, roof lights, corner lights, rear lights, identification lights fender lights,cab lights, clearance lights etc. Note: this led marker lights only come with one positive wire, one functions at a time. If you use it as the front turn signal lights, it may not be that bright, thanks.
  • Application: Works on any 12V DC vehicles. Perfectly suitable for all kinds of trucks, Trailer, Semi-trailer, Lorry, Off-road vehicle, ATV, SUV, UTE, Pickup, Tractor, Bus, Car, Boat, Caravan etc. Most customers use it as horse trailer clearance lights, cargo trailer marker lights, RV clearance lights, camper marker lights, toy hauler marker lights, utility trailer marker lights, car trailer marker lights etc..
  • Warranty: We truly offer 1 year warranty for this rectangle led marker lights! If have any questions or issues about our partsam led lights, Please feel free to ....
Check Stock

LED Side Marker Lights, Nifeida 4 LED Waterproof Square Stud Mount Trailer Clearance Light Side Reflex Running Lights for Truck RV Boat Camper Trailers(2 Amber)

  • ...orized, Unique reflector light housing helps the light output evenly in all directions, make the side marker light visible even in the dark, it means that a separate reflector is not needed..
  • 【Stud Mount Design】Not plug and play, but the stud mount. Stud mount design ensure the running lights firmly fixed to the surface. Convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze..
  • 【Weatherproof with High Quality】The upper and lower covers of high mount stop light are tightly integrated, it's be ready for different kinds of weather attack, withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather..
  • 【Wide Application】The side marker light kit including 2 side marker lamps and mounting screws,it can be used as side marker lights, clearance lamps, running light, reflector ligths. Perfect for Truck RV Boat Camper Trailers..
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • ...w less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light.
  • Dimensions: 8.5" x 6" x 1", 7.6" for horizontal hole distance.
  • These 12V DC 8 inch Oval trailer lights are universal for rv, motorhome, camper, Trucks, trailers, tractors, semi trailer, horse trailer, travel trailer, dump Truck, special vehicle etc. Anywhere you'd like as well as the size fit.
  • Warranty: We truly offer 1 year warranty for these 8.5 inch oval led trailer tail lights! If you have any questions or issues about our partsam oval led lights, Please feel free to us and ....
Check Stock

Vintage Technologies LT28 RV Teardrop Trailer LED 12 Volt Side Markers

  • LED Surface Mount, (3 Diode) Side Markers With Chrome Bezel's.
  • Kit include 2 Amber 3 LED Side Marker Lights and 2 Red 3 Led Side Marker Lights, Four Chrome Bezel's.
  • These Lights are Approximately 4" Long and 1 1/4" Wide and 3/4" Tall.
Check Stock

Nilight 6 Gang Rocker Switch Box 12V SPST ON Off Switch QC 3.0 USB Charger Voltmeter Waterproof Aluminum Rocker Switch Panel Night Glow Stickers for Boats Cars RVs Trucks 2 Years Warranty

  • ...nable you charge two devices simultaneously at full speed. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.
  • The voltmeter is built in the center of the USB charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles..
  • Surface Mount: With surface mount enclosure. The box can be mounted either on the dash board, under dashboard, middle console or anywhere on the car. The bracket can be adjusted 360 degrees.This gives you more mounting options..
  • Wide Application: The switches allows you to control up to 6 different devices,such as Led Light Bars, Rear Lights, Rock Lights, Windshield Lights,Off road Lights, Sasquatch Lights, Zombie lights and Wench power, etc. The complimentary transparent and night glow stickers enables you to DIY the switch according to your preference..
Check Stock

Nilight 4 Gang Rocker Switch Box 12V SPST ON Off Switch QC 3.0 USB Charger Voltmeter Waterproof Aluminum Rocker Switch Panel Night Glow Stickers for Boats Cars RVs Trucks, 2 Years Warranty

  • ...at full speed. It works for all USB-powered devices. Makes the charger 40% faster than conventional chargers.
  • The voltmeter is built in the center of the USB charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles..
  • Surface Mount: With surface mount enclosure. The box can be mounted either on the dash board, under dashboard, middle console or anywhere on the car. The bracket can be adjusted 360 degrees.This gives you more mounting options..
  • Wide Application: The switches allows you to control up to 4 different devices,such as Led Light Bars, Rear Lights, Rock Lights, Windshield Lights,Off road Lights, Sasquatch Lights, Zombie lights and Wench power, etc. The complimentary transparent and night glow stickers enables you to DIY the switch according to your preference..
Check Stock

1x4 Surface Mount Kit for LED Flat Panel Light - 4 Pack 12x48 inch Aluminum Ceiling Flush Mount Frame Kit Easy to Install White Coating

  • ✅【1x4ft Universal Surface Mount Kit】 - 1'x4' surface mount kits are an accessory designed especially for 1x4 Edge-Lit Flat Panels. These kits....
  • ✅【Direct to Mount LED Panel Lights in Locations without T-bars or Lay-in Ceilings】- No need to saw off the ceiling, reducing labor time and....
  • ✅【Mounting Hardware Included & Assemble Firmly】 - LED 1x4 surface mount kit and screws required for installation. Flush set screws holds all....
  • ✅【Easy to Assemble for Quick Field Installation】 - Simply install three of the four plates provided on the ceiling, slide the LED panel in, and....
  • ✅【Gloss White Powder Coat Finish Ensures Maximum Rust Prevention, Durable Frame】- Made of high quality extruded aluminum construction.
Check Stock

Partsam 10Pcs 6.2 Inch Red LED Trailer Side Marker Lights 12 LED Surface Mount Sealed Clearance Indicator Lights Lamps Waterproof Chrome Bezel Turn Signal Trailer Bus Universal Ultra Flat Clear Lens

  • ... (W) x 0.5" (H) and 4.0" between mounting holes( measured center-to-center).
  • This flush mount led light are hardwired with 2 wire pigtails: Black is ground and red is positive. Easy to install and looks great on your bumper, cab-and-sleeper kits, fender guards, everywhere else you can imagine.
  • Functions: these surface mount led lights can be work as trailer lights, led marker lights, side marker lights, led clearance lights, side cab panel lights, fender lights, indicator lights, truck lights etc. These red led lights are universal for 12V DC vehicles, esp. the heavy trucks such as Peterbilt, Kenworth, Freightliner etc..
  • Warranty: We truly offer 1 year warranty for these oval Flat red Marker LED Trailer Lights! If have any questions or issues about our flat line led lights, Please feel free to us and we will reply in 24 hours.
Check Stock

Partsam 20Pcs 2\ x 4\ Double Bullseye Led Marker Lights 10 diodes Surface Mount Sealed Rectangle Rectangular Led Trailer Marker Clearance Lights Waterproof 12V

  • Package includes 20 Pieces double bullseye led marker lights (10 Amber lights + 10 Red lights). Each trailer marker light includes 2 pieces stainless steel screws for surface mounting.
  • Each led markers boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamp, sonically sealed polycarbonate lens and weatherproof housing.
  • About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1".
  • The rectangular led light features a replaceable, snap-on lens. The white base surface mounts on standard 3" centers, and the two-wire design includes the lead and ground wires to mount to any surface: black is ground and red is positive.
  • This double bullseye LED light can be used as a clearance or marker light.
  • These LED marker lights have the "double bullseye" design just like the marker / clearance lights on Airstreams from 1969 and many later models.
  • These trailer lights go by a few different names - tiger eye led lights and double bubble led lights are the most common ones that we hear. This is a nice-sized side marker light for anywhere on the truck.
  • Different form many bullseye lights selling on the market, The wires do not exit from the middle but form the corner.
  • These 12V rectangle LED lights are univer....
Check Stock

4 Pieces Aluminum Trailer License Plate Bracket Holder with Light Mount for Trailers Trucks Cars Motorcycles

  • Size information: aluminum license plate bracket measures approx. 9.5 x 5 x 0.6 inch, the thickness is approx. 1.58 mm, weights approx. 2.30 oz, designed for replacing your plastic license plate bracket.
  • Detailed information: 2 top mounting holes have 1.5 inch inner and 2.4 inch outer distances, bottom license plate slots have 4 inch inner and 8.5 inch outer distances, bottom section has 0.6 inch offset.
  • Durable to use: made of sturdy and rustproof aluminum alloy with well-polish surface, the front and back sides of aluminum alloy tread surface are covered with blue film to protect the surface, please peel off the film before installation.
  • Practical to use: suitable for stud mount lights or combination tail lights and stop lights.
  • Widely applied: compatible with most trailers, such as motorcycle, boat, transport, construction, snowmobile, etc..
Check Stock