Top Surface Mounting Aluminum Electrolytic
Cenrykay Ceramic Capacitor Set ,23Type Values 230Pcs Ceramic Capacitor Assortment Kit Capacitors from 10PF to 10 UF -23 each of 10
- High quality Aluminum electrolytic ceramic capacitor, Capacitance Tolerance: ±10% ~ ±20%.
- Color: Yellow. Stable and long service life..
- .Marker code on every electrolytic capacitor, easy to distinguish.
- Capacitors were individually bagged. Better than the average experience where everything is in compartments that intermix during transport..
- Monolithic capacitors assortment kit, includes 23 most popular types of capacitor ceramic which could meet your basic needs. Great for DIY electronic projects..
- Capacitance Model: 10PF~10UF (10PF, 20PF, 22PF, 30PF, 100PF, 220PF, 330PF, 470PF, 1000PF, 2200PF, 3300PF, 4700PF, 10NF, 22NF, 33NF, 47NF, 100NF, 220NF, 330NF, 470NF, 1UF, 2.21UF, 10UF ).
- Excellent Humidity Resistance, Miniature Size, Wide Capacitance, Reliable Performance.Capacitor kit ceramics are widely used in computers, data processing, telecommunications, industrial control and other fields..
Check StockMartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
Check StockMartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
Check StockSpecial Lite Products Company, Inc. SPK-600-CP Mailbox, Full Size, Black
- 7 1/2" Diameter Base x 62" H Pole Cast Aluminum Pole + plus mailbox mounting arm.
- Decorative cast aluminum curbside mailbox post with a durable powder coated finish..
- The adaptable Ashland Mailbox Post offers several options for installation. Each is provided with mounting hardware to attach them to a new concrete pad (surface mount) and a bolt on 18" direct burial post for installation into new concrete..
Check StockFstop Labs Replacement for DJI Phantom 4 Professional/Advanced Gimbal Yaw Arm Aluminum CNC Replacement Part
- For repairing broken DJI Phantom 4 Professional Yaw Arms.
- Plasma electrolytic oxidized to match original parts.
Check Stock100Pcs Flux Core Welding Wire Aluminum Welding Rods 550℃/1022℉ Aluminum Brazing Rods Solution Welding Flux-Cored Rods for Samll Projects (1/16''x13'')
- ONLY FOR WELDING ALUMINUM - The Aluminum welding flux-cored rods are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance..
- NO SOLDER POWDER NEEDED - The aluminum brazing rods don't need to use other flux powder while repairing aluminum..
- HIGH QUALITY MATERIAL - The low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum..
- APPLICATION - The flux core welding rods are used for welding and filling material for pure aluminum small projects, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, chemistry and so on. The melting piont of solution welding flux-cored rods is 550℃(1022℉) ..
- WARRANTY -- guangfan provide this product have 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check StockFSP Mini ITX Solution/Flex ATX 500W Efficiency ≥90% Full Range Active PFC Power Supply Flex Guru 500W
- Meets 80 Plus Gold ≥ 90% Efficiency | Compliant with latest UL standard 62368 and 60950 standards.
- Intelligent fan speed control with ball bearing fan| black coat finish |Direct cable output.
- Powerful single +12V rail design |100% Japanese made electrolytic capacitors.
- Full protections: OVP, SCP, OPP, OTP| 5 Year Warranty.
Check StockMartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
- Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
- Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
- Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
- Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check StockA-Team Performance - Fabricated Aluminum Valve Covers with Gasket Coil Mounts - Compatible with GM LSX Black
- Fabricated Aluminum Valve Covers with Gasket Coil Mounts BLACK.
- Compatible With — Chevrolet Small Block V8 Gen. III/IV (LS Based) - 4.8 L / 293 in3, 5.3 L / 325 in3, 5.7 L / 346 in3 (commonly referred to as 350), 6.0 L / 364 in3, 6.2 L / 376 in3, and 7.0 L / 427 in3.
- Fabricated Aluminum — Valve Covers With a Clean and Unique Aesthetic Racing Look From Strong Yet Lightweight 6061-t6 Aluminum.
- Tall Height — Added Clearance for High-performance Valvetrain Set-ups. Mounting Hardware — Complete Kit Which Includes Everything for Installation in LS Engine Covers.
- Specifications — Center Bolt Mounting Style, Billet Aluminum Mounting Surface, and One-piece O-ring Gasket Included.
Check Stock1 Pair Aluminum Bullbar Mounting Bracket Clamps for LED Light Bar Mount Car Truck SUV ATV Off Road Vehicle(3inch)
- Bullbar Mounting Bracket: This car led light bullbar mounting bracket can work with most LED, HID, halogen spotlights/fog lights/driving lights or light bars. Rubber inserts dampen driving vibration and avoid scraping bull bar surface..
- A Full Complete Kit: This aluminum bullbar mounting bracket clamp works with LED light bar with allen key, screws, nuts, split washers, a full complete kit for mounting directly onto your bull bar. Fix the light on tube firmly, pre-drilled hole for easy installation.
- Premium Quality: Made of premium aluminum alloy material, this led light bullbar mounting bracket is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
- Perfect Compatibility: The aluminum bullbar mounting bracket clamps is perfect suitable for most of road vehicles, cars, trucks, boats, farm vehicles, etc, great solution for the problem of holding your light. Material: Aluminum Alloy.
- What You Will Get: We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check Stock1 Pair Aluminum Bullbar Mounting Bracket Clamps for LED Light Bar Mount Car Truck SUV ATV Off Road Vehicle(2.5inch)
- Premium Quality: Made of premium aluminum alloy material, this led light bullbar mounting bracket is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
- Perfect Compatibility: The aluminum bullbar mounting bracket clamps is perfect suitable for most of road vehicles, cars, trucks, boats, farm vehicles, etc, great solution for the problem of holding your light. Material: Aluminum Alloy.
- Bullbar Mounting Bracket: This car led light bullbar mounting bracket can work with most LED, HID, halogen spotlights/fog lights/driving lights or light bars. Rubber inserts dampen driving vibration and avoid scraping bull bar surface..
- A Full Complete Kit: This aluminum bullbar mounting bracket clamp works with LED light bar with allen key, screws, nuts, split washers, a full complete kit for mounting directly onto your bull bar. Fix the light on tube firmly, pre-drilled hole for easy installation.
- What You Will Get: We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check StockFishing Weight Sinker Soft Carp Fishing Weight Sinkers Terminal Tackle Tools
- What you'll get: 20 pieces of fishing sinker weights with a length of 3.3 cm/ 1.3 inches and a diameter of 0.8 cm/ 0.3 inches, all of them are packed in a plastic bag with good seal, easy to carry around without worries about losing.
- Sufficient quantity can meet your different needs, also you can share with your friends.
- Electrolytic Material: these fishing weights sinkers are made of electrolytic, which is heavy, hard wearing and features good performance, and can serve you for a long time.
- Water Drop Shape Design: each fishing weight is characterized by water drop shape design, which is designed to reduce resistance and make it easy to drop into water, also it could reduce water splashes and won't scare the fish away, a nice accessory for bottom.
- Brass Hanging Ring: at the top of the sinker, you can see a brass hanging ring design, which is bold to make it more sturdy to use, rustproof and sturdy, and won't hurt the fishing line because of the smooth and polish surface.
- Wide Application: the bullet raindrop fishing sinkers can be applied in freshwater and saltwater, the standard weight allows it to sink into the water, which can help you get your fish baits down to other fishing area and attract more fish.
Check Stock