Top Swage Bushings

Hilmor 1964041 Deluxe Compact Swage Tool Kit - HVAC Tools and Equipment, Black

  • SWAGING TOOL: Combination of power and control makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 2-1/8″ tubing to 1/4″ without a crack. Includes a deburring tool, designed to remove sharp edges and burrs..
  • SINGLE HAND OPERATION: One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Propietary design, combined with a weidght of only 8.5 lbs, reduces user fatigue..
  • EXTREMELY VERSATILE: The pistol shape design means it can fit in the small, hard to reach areas..
  • INCLUDES: Swage body, deburrer, kit box, and 10 expander heads (1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1-1/8″, 1-3/8″ and 1-5/8″).
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Lug Crimper Tool for 10 AWG - 400 MCM wire lugs- DIELESS Indent Electrical Battery Terminal Cable Wire KH-230

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job....
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we....
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this....
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little....
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Morris 22328 Snap Bushings, 1.50-Inch, Black, Pack of 10

  • Electrical Bushings Snap Bushings - Snap Bushings for Metal Panels keep wires safe..
  • Snap bushings Eliminate Sharp Edges and insulate your sharp-edged holes in metal panels.
  • Easily Locks into Hole firmly with fingertip pressure.
  • Snap Bushings Protect Electrical Cables, ropes, utility lines passing through metal chassis.
Check Stock

Orangatang Nipples Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY LONGBOARD BUSHINGS – The Orangatang Nipples are big and lively bushings designed to help you bounce out of every carve with tons of energy and rebound..
  • LARGE BARREL SHAPE – Slightly wider and taller than most stock truck bushings, the Nipples provide your trucks with more support and more material to squish, making for a highly responsive ride..
  • RANDY THANE – The ideal urethane formula for energetic, high-rebound bushings. Make your trucks come alive!.
  • THE PERFECT SET – Each pack contains two taller bottom bushings (0.66"), two shorter top bushings (0.56"), and four thin and strong flat washers..
  • SOFT – Great for tight turns and maximum response..
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock