Top Swing Flange Type

Martin 7JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEMS Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Universal Turbo Turbocharger T3 T4 T04E A/R .50 A/R .63 V-band Oil 1.5-2.5L SCB

  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns.
  • Horse Power: Boost Horse Power up to 420HP.
Check Stock

Tb Woods 5J12 Coupling

  • Item - Sleeve Coupling Flanges: Sleeve Coupling Flange.
Check Stock

Pexco Brand Fence Weave 250 Roll - Stop Sign Red - Made in The USA!

  • ✔ SAVE YOUR MONEY WITH EASY INSTALLATION Patented SecureSnap assembly design enables you to assemble a panel in the matter of minutes..
  • ✔ OUR QUALITY Built from strong wrought iron, pre-galvanized inside and out, double-powder coated, black..
  • ✔ COMPACT SIZE FOR EASY LOADING AND LIFTING Compact box allows for an easy load for going directly to a job-site and an easy lift at the job-site..
  • ✔ INCREASE YOUR PROPERTY BEAUTY AND VALUE – Using the 6.5'H posts included in the kit on soil ground or cutting them to 5'H with flange (Flange....
  • ✔ OFFER YOU SECURITY AND DURABILITY, PERFECT MATCH FOR XCEL FENCE GATE OR PURCHASE GATE KITS TO CONVERT INTO 6.5'FT WIDE GATE or Double Swing Gate....
Check Stock

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D

  • Provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts.
  • Jaws can be set up for 2 or 3 jaw internal or external pulling jobs.
  • 5-1/2 lb slide hammer has a 5/8-18 thread.
  • Yoke fits axles with 4, 5, or 6 Studs in a circle from 4-1/2" To 5-1/2".
  • Pulls rear axle on cars and 1/2-ton trucks with flange-type axles.
  • Durable blow mold storage case for tool retention and portability.
Check Stock

TPOHH #6-32 Stainless Steel 18-8 (A2) Serrated Flange Hex Lock Nuts, 24 PCS, DIN6923-6-32

  • Flange operates like a washer to distribute load.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
Check Stock

Martin ML095BLK 7/16 Universal Series Jaw Coupling, Sintered Steel, Inch, 0.438\ Bore A, 0.438\ Bore B, 2.125\ OD, 1\ Length, 189 in-lbs Nominal Torque

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Front Suspension Swingarm Assembly, Diy Parts for Buggy Electric Atv Go Kart Bike (Us Stock)

  • ★【FEATURES】: 100% brand new and high quality,Durable, Front suspension rocker modification for ATV Quad Bike Buggy Go Kart, The driving is more stable, the driving is more labor-saving and more fun..
  • ★【NOTE】: Installation Manual Is NOT Includedm, Professional Installation Is Highly Recommended.
  • ★【SPECIFICATION】Flange: 3 holes, Hole Distance: 84.5mm, Suspension Shock Length：285mm, Suspension Shock Hole Distance: 250mm, Upper Shock Swing Arm Length：195mm, Lower Shock Swing Arm Length：220mm.
  • ★【FITS (FOR THE REFERENCE)】: For DIY ATV Quad Bike Buggy Go Kart Parts.
  • ★【PACKAGE INCLUDES】: 2*Upper Swingarm, 2*Lower Swingarm, 2*Suspension Shock, 2*Steering Strut Knuckle Spindle & Wheel Hub, 4*Bolts.
Check Stock

maXpeedingrods New T3 T4 T04E A/R.63 V-band Turbo 420+HP STAGE III Turbo Charger + Universal Oil Drain & Return Feed Line Kit

  • OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm​* OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm.
  • Perfect for all 4 or 6 CYL, 1.5L-2.5L engines.
  • Horse Power: Capable of Boosting Horse Power up to 420HP.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns & Exhaust (Downpipe) Flange: V-Band Flange.
Check Stock

76pc SPECBOLT Body Bolt KIT for Plastics seat fenders Fork Guards shrouds & subframe. Fits KTM & Husqvarna 65 80 85 125 150 200 250 350 400 450 500 520 525 SX SX-F XC XC-F XC-W XCF-W EX EXC EXC-F

  • 76 matching factory fit flange bolts that fit: KTM Husqvarna.
  • OE type torx head flange bolts with factory matching Dacromet plating.
  • Generous selection of Original Factory Matching fasteners.
  • Used for body work, plastics, seat, fork guards, and subframe on 2 and 4 stroke bikes.
  • Complete with 2 styles Factory Match radiator shroud bolts gold screws and M5 flange bolt type.
Check Stock