Top Switch Valve

SunCleanse Bathroom Rainfall Shower Faucet Set Complete and 7 Settings Hand held Shower with ON/OFF Pause Switch

  • PRESSURE BALANCE SHOWER VALVE: Brass shower faucet rough-in valve body and trim, strong compression resistance, no leaking. cUPC certified valve cartridge can protect us from scalding injury caused by sudden changes in hot and cold water pressure..
  • EASY TO INSTALL: Installs in minutes with just one hand-tightened connection. It fits any standard shower arm.（Note: Pls don't use plastic tape when installing）.
  • 6 POWERFUL SPRAY OPTIONS ONE-KEY SWITCH: Hand shower spray settings include misty rain, full cover rain, gentle rain, massage rain,pulsating massage, power rain, and you can easily press one key to switch..
  • WATER SAVING ON/OFF PAUSE SWITCH:Suncleanse shower head using advanced internal flow blocking technology. the water flow can be completely cut off by simply flipping the switch and save water, instead of turning off the faucet in the shower..
  • 5 YEARS WARRANTY: Any product quality problem can be guaranteed free of charge. The shower cartridge is permanently replaced free of charge..
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

Fuel Valve Petcock Switch Assembly for Yamaha Virago 700 XV700 1984-1987

  • ★Condition - High performance Fuel Valve Petcock Switch , meets or exceeds OEM standards, 100% tested before shipping；.
  • ★Fitment - Fuel Valve Petcock Switch Assembly for Yamaha Virago 700 XV700 1984-1987.
  • ★Feature - Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips.
  • ★Note - The pictures are accurate because of real shooting, please check it carefully to make sure it is what you need.
  • ★Package Included - 1 X Fuel Valve Assembly as images display.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • ...Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will serve you within 24 hours..
Check Stock

MENSI Outdoor Propane Gas Patio Heater Replacement Parts Safety Thermocouple Sensor

  • Propane gas patio heater dump switch type thermocouple end nuts for valve M8*1.
  • Two terminals connect dump switch on the patio heaters.
  • Thermocouple tip thread M6x0.75 universal type (Can adjust height easily by nuts).
  • Easy install - Head for heating around burner and thread nuts for valve other two terminals for dump switch.
  • The thermocouple can connect a thermostat as well. Keep the head to be heated always or it may stopped gas.
Check Stock

Gralara High Pressure Washer Ball Valve Quick Connector High Pressure Resistance for Agricultural Irrigation, 1 of 4inch

  • STURDY DESIGN: Made of durable steel material, this ball valve is specifically designed for pressure washing machine hoses that need to handle high pressure ratings up to 4500 PSI and a maximum temperature of 60 degrees Celsius..
  • VERSATILE: Perfect for car wash, patio, siding, and deck cleaning jobs, this high-pressure washer valve switch makes cleaning tasks quick, easy, and efficient..
  • QUICK CONNECTOR: This high pressure washer ball valve kit comes with a 3/8" quick connector and plug for easy attachment to your sprayer, nozzles, pumps, and hoses..
  • COMPATIBILITY: The adapter's thread size is 3/8 NPT, not G 3/8 (3/8 BSP)..
  • EASY TO USE: This ball valve switch is designed for easy opening and closing, and provides tremendous leverage under high pressure..
Check Stock

Electric Hydraulic Double Acting Control Valve w/Rocker Switch 2 Spool 15 GPM A Spool Controls Double Acting Cylinders 12 Volt

  • 2 Spools, A Spool (Controls Double Acting Cylinders), 12 Volt.
  • Momentary Rocker Switch includes a 3′ switch harness and 5′ extension valve harness for a total of 8′ between switch and valve allows for easy control with Mountable Switch Bracket.
  • All spools are double acting with spring return to neutral position, A spool is designed to control double acting cylinders, A and B ports are closed to Tank in neutral position.
  • Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI.
Check Stock

Fuel Petcock Valve Switch Fit for Harley Sportster Big Twin and Custom Tanks 1975-2006 Replace 62168-81 62167-81 62163-75 011401 Gas Tank Fuel Petcock Shut Off Valve Switch

  • Fitment - Fuel petcock valve switch compatible with Harley Sportster, Big Twin and Custom Tanks 1975-2006 Fuel Valve Petcock Switch Assembly (Please check to make sure that this will fit in your tank.).
  • Replaces Part #: Replace fuel vavle petcock shut off tank switch 62168-81 62167-81 62163-75 011401. Package Include: 1 x Petcock, 1 x Gasket Seal. Gasket prevent leakage. Oil seals act as seals to prevent leakage..
  • No Leaks - Internal Female 22MM thread. 1/4" barb accepts 1/4" ID hose, important to have proper placement of the o ring to prevent leaks.
  • Great Flow - The built-in filter allows for extra protection against debri entering your fuel system while still providing maximum flow. This fuel petcock valve switch parts has 3 positions switch. ON: Allow you to operate with normal fill-ups.
  • OFF: Completely shuts off gas flow when you are done riding.
  • RESERVE: Allow you to access the lower portion of the gas tank when gas level is low.
  • Good Quality - The petcocks are chrome-plated. Please check the threading on your bike to be sure this is what you need before you buy. Measure the outer diameter of the threaded outlet on the gas tank, not the inner diameter of the petcock nut..
Check Stock

Bidet T Adapter with Shut off Valve,Metal T Valve for Bidet 7/8” X 7/8” X 1/2”or 3/8”,Tee Connector Bidet Attachment for Toilet

  • T-valve adapter is made of high-quality solid brass and the surface is chrome-plated, which is beautiful and durable, and can be used for a long time..
  • Brass Shut-off T-adapter for bidet is designed to be controlled by a single lever, and the switch can be completed by rotating a 90-degree angle, and the water pressure and switch can be easily controlled.
  • The thread of the bidet shut off valve is 7/8"X7/8"X1/2".the 7/8" male thread is used to connect the water supply hose, the 7/8 " female thread is used to connect to the toilet tank, and the 1/2" thread is used to connect the handheld Spray hose, or connection 1/2" X 3/8" adapter for 3/8” bidet toilet seat attachment connection..
  • Note: The T-valve is only suitable for toilets and cannot be connected to showers or faucets.
  • Used to turn off the water flow when not in use and adjust the water flow to your needs. turning off the switch will not affect the water flow of the toilet tank. The valve only controls the water flow of the hand-held sprayer..
Check Stock

Protech 63010 Refrigerant Recovery Cylinder, 400 psi, 50 lb.

  • Powder coated cylinder for high gloss, durable finish.
  • Reusable and conforms to dot-4ba400 specifications and ari guidelines.
  • 3/4" npt opening accepts 80 percent fill float switch shut-off device (does not included the float switch valve, if you need it, please see master cool part # 62011 which includes it).
  • Pre-charged cylinder provides a clean, dry interior.
Check Stock

HZR Copper Ball Valve Internal Water Pipe Equipment Accessory

  • Hand tightening provides reducing the risk of leakage and self-locking type design, more convenient for you to use..
  • Brass for corrosion resistance, ductility at high temperatures, and low permeability and valve requires no special tools ..
  • Working medium: natural gas, liquefied petroleum gas, and each valve individually tested for maximum safety..
  • It was widely used in irrigation systems, pipeline systems, oil and gas supply systems with different size and colours..
  • Copper ball valve thick brass inner wire for tap water switch, water valve and water pipe valve..
Check Stock

mistcooling System - Stainless Steel Tubing - 1500 PSI Misting Pump - Do It Yourself Misting System - for Residential, Commercial and Industrial - Up to 120 Nozzles (18 Ft Mist Line - 10 Nozzles)

  • 1500 PSI Misting Pump with Stainless Steel Tubing, Stainless Steel Nozzles. Do it Yourself Misting System, easy to Install , comes with all parts. For Residential. Commercial and Industrial Misting Applications.
  • Base 10 Nozzle Mist Kit Includes: 1 - 1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5 micron filtration, Outdoor Rust Proof Enclosure with on/off Switch 18ft Stainless Steel tubing for push lock (Pre-cut 2ft sections), 22ft UV coated Flexible 1/4" feed line, 10- Nickel Plated Push Lock Misting Tees, 10- Stainless Steel Orifice Misting Nozzles (0.006"), 2- Nozzle plugs, 1 - Push Lock End Plug.
  • 1500 PSI Pump Features :Inbuilt Filtration, Direct Drive, With Solenoid, Pressure Switch, No Water Cut off Switch, With By-Pass Valve, 50-60 DB, TEFC Motor , 110 V AC.
  • Easy to Customize, Easy to Install, Do it Yourself Misting, With Push Lok Fittings for Ease of Re-Use.
  • 2 Ft Stainless Steel Tubing Pieces with Grooves makes it easy to use the System for Industrial Applications..
Check Stock