Top Swivel Hose Barbs

ACDelco 91002 Professional Power Clean Cooling System Flush Tool Kit

  • Equipped with a pulsating gun assembly with a pre-set regulator for accuracy.
  • Hinders water line backflow to lessen water pump damage.
  • Large rubber tip for radiator necks and direct flushing of the engine block.
  • Small rubber tip on the whip hose for direct access to the heater core tube stubs.
  • 5?8 in and 3?4 in heater hose barbs for flushing heater cores or engine blocks.
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

PWACCS Pressure Washer Swivel, M22 14mm Swivel Joint, Stainless Steel, 5000 PSI

  • UNIVERSAL CONNECTORS: Pressure washer swivel convert metric M22 14mm male to M22 female thread fitting. Easy to connect and release. Pressure washer swivel joint can connect gun and hose, hose and hose easily. Pressure washer fittings fit most brand of pressure washer hoses and guns..
  • 360 degree rotation freely, pressure washer swivel fitting helps keep the pressure washer hose from tangling and getting kinked when Spraying. The kinks unfolding as you move around. It will solve hand fatigue due to the pressure built up between hose and gun..
  • Pressure washer gun swivel is made of high quality stainless steel, durable, wear resistantand, resistance to corrosion, long service life..
  • Pressure washer hose swivel’s Max Working Pressure: 4500 PSI. Max Flow Rate: 30.0 GPM. Max Working Temperature: up to 120℃, 250°F..
  • If the Kink free gun to hose fitting have any questions, please contact us at first time. We provide a service of quick reply within 24 hours..
Check Stock

Dixon PTLS10040 FNPT Poly T-Line Strainer, 40 Mesh, 1\ ID, Polypropylene

  • Improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins..
  • Saves time and beer, pays for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives..
  • Made of high quality material, rugged and durable for repeated use, the maximum operating temperature is 150℉..
  • Easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean, fits 3/8in inner diameter siphon tubing (standard size)..
  • Perfect for large batches and dry hopped beers. Include 2 hose barbs, 1/2in(12mm) hose barb, 1/4"(6mm)hose barb available..
Check Stock

LDR 515 B5003S Braided Vinyl Hose Tubing, 1/2-Inch ID X 3/4-Inch OD, Clear, 100-Foot Spool

  • Ideal for oil, fuel, air and water lines and food/beverage dispensing.
  • Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.
Check Stock

LDR 515 B5002S Braided Vinyl Hose Tubing, 3/8-Inch ID X 5/8-Inch OD, Clear, 150-Foot Spool

  • Ideal for oil, fuel, air and water lines and food/beverage dispensing.
  • Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock

ATIE 280 380 480 180 Pool Cleaner Sweep Hose Complete B5 Replacement for Zodiac Polaris 180 280 380 480 Pool Cleaner Sweep Hose Complete B5 B-5

  • Rich Content: Our pool cleaner hose swivel accessories set includes 3pcs D20 hose ball bearing swivel replacement parts and 6pcs D15 feed hose nuts, which can meet your requirements for long-term and alternative usage. You can also share them with other people..
  • Easy to Assemble: Our pool cleaner feed hose nut adopts closed design so that you can connect the hose nut with the hose swivel firmly. It takes 2 hose nuts and a hose swivel to connect 2 feed hoses together. It's very convenient when you need to connect multiple hoses..
  • High Quality Material: The material of our pool cleaner hose replacement accessories set adopts high quality plastic material. Compared with ordinary plastic, it has a character of hardness and not easy to break, making you use longer. It is the best choice for your pool cleaners..
  • Wide Compatibility: The swimming pool cleaner hose accessories are compatible with polaris 180, 280, 380 swimming pool cleaner, so you don't have to worry about choosing cleaning accessories that can not match different kinds of pool cleaners..
  • Great Combination: Our package offers you both the hose swivel and the matching nuts, a complete combination for you to replace the old ones that perform badly. You dont need to pay extra money to buy another ac....
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • Universal Hose Pliers Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy car....
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

8AN 20Ft Universal Braided Oil Fuel Line Hose Stainless Steel Nylon CPE with 10PC Swivel Fitting Hose Ends Adapter Kit-Black

  • Application: Universal,Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. (Not PTFE)).
  • Material:Based on premium stainless steel & Aluminum Alloy materials & Nylon, firmly, securely, light weight and portable.
  • Hose: Size(ID): AN 8, Length: 6m/20ft, Pressure Tolerance: 1500 PSI, Color: Black Hose End: Size(ID): AN 8, Color: Black.
  • Professional installation is highly recommended. Recommended to use Adjustable AN Wrench..
  • Package Includes: 1 x Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends.
Check Stock