Top Swivel Hose Fittings

Camco 39639 Revolution 10' Sewer Hose Extension - Heavy Duty Design with Pre- Attached Swivel Lug and Bayonet Fittings, Easy to Use and Compresses for Simple Storage

  • Includes a 10 feet heavy duty vinyl RV sewer hose with pre attached swivel lug and bayonet fittings.
  • Extend the reach of your Revolution sewer hose kit.
  • Hose compresses to approximately 2 feet for easy storage.
Check Stock

Camco RhinoFLEX Tote Tank 3-foot Sewer Hose Kit | Features a Clear Low-Profile 90-Degree Elbow, Steel Wire Reinforced Polyolefin Construction, and 4 Bayonet Prongs on Each End (39768)

  • Assembled Kit Includes: (1) 90-degree transparent elbow with swivel bayonet fitting, (1) RhinoFLEX tote tank sewer hose, (1) hose-to-RV swivel bayonet fitting, and (2) storage caps.
  • Compatibility: Connects your portable waste tote tank to a lug sewer fitting.
  • Fittings Swivel: For ease of use and are designed to stay sealed.
  • Easy to Store: Assembled kit is 3-feet long when extended.
  • Durable Construction: The RhinoFLEX sewer hose is made of a heavy-duty polyolefin and reinforced with steel wire.
Check Stock

Plews/Edelmann Amflo 4-12 Lightweight 1/4\ x 12' Nylon Recoil Air Hose Stores Itself When The Job is Done - Ideal for Home, Shop, and Industrial Use, Yellow

  • Amflo's 12' yellow nylon recoil air hose is ideal for home, shop, and industrial use where the tool is close to the air supply like industrial workstations and home workbenches.
  • Oil and chemical resistant hose retains it's self-coiling properties over time and stores itself when finished - keeping the hose out of the way when not needed.
  • 200 PSI working pressure has the capacity for all kinds of pneumatic tools - brad nailers, staplers, rotary tools, blow guns, spray guns, and more.
  • Swivel end fittings reduce hose twist while bend restrictors extend hose life by reducing opportunities for 'pull' damage on the hose ends.
  • Features: 1/4 inch NPT swivel fittings to reduce twisting, rugged steel coil bend restrictors, 200 PSI working/800 PSI burst pressure, +32 to +120 temperature range.
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

Camco Revolution Sewer Hose Kit with 360 Degree Swivel Fittings and 4-in-1 Elbow Adapter, Universal Fit, 20 Feet (39634)

  • Set Includes: RV sewer hose kit comes with two 10-foot heavy-duty vinyl sewer hoses with pre-attached swivel fittings, one translucent swivel elbow fitting with 4-in-1 adapter, four storage caps, and wire guards to protect your hands.
  • Efficient Design: This RV sewer hose is fully adaptable and can be used for 20-foot or 10-foot setup.
  • comes with pre-attached swivel fittings that rotate 360 degrees.
  • Easy to Use and Store: No clamps or tools needed for installation.
  • the 10-foot section compresses to approximately 2 feet for easy storage.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

  • Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
  • Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
  • Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
  • Package Inclued: 2 pcs x 6AN straight swivel hose ends.
  • EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Apache 39004375 1/2\ Male Pipe x 1/2\ Female Pipe Swivel, Hydraulic Adapter

  • 10 pack of FJX-08-08 female swivel hydraulic hose fittings..
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
  • Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock

Yard Butler HRHC-GIFT2 Handy Reel with Hose Hanger Set Blue

  • LIFETIME GUARANTEE: Stop buying plastic or cheap metal products that don’t hold up over the years.
  • Yard Butler products are designed to last a....
  • WALL MOUNT ROTATING HOSE REEL holds up to 75 feet of standard 5/8 inch garden hose on the wall and off the ground so it stays neat and tidy.
  • EASY REELING: wall mounted swivel hose holder uses the no-leak, Max Flo design for smooth winding so your garden hose is always ready for watering.
  • POWDER COATED STEEL: Heavy-duty and rust-resistant garden hose reel.
  • Patented design with brass fittings holds your hoses strong and steady and....
  • 90 DEGREE SWIVEL HOSE REEL measures 13.75 inches high, 13.5-inches wide, 8.6 inches deep, and weighs 8 pounds.
  • Includes a 5 foot supply hose to attach....
Check Stock

4 Pieces 1/4 Inch NPT 360 Degree Swivel Air Hose Connector 1/4 Inch Swivel Air Plug Air Fittings Connectors Portable Air Tool Plug Male Thread Female Thread Household Industrial Coupler and Plug

  • 360 Degree rotation: both male air hose connectors adopt 360 degree swivel design, which would not break the air hose, and prevent the hose from kinking, keeping the air line from getting tangled and twisted and increasing the maneuverability.
  • Widely applied: there are two connections of 1/4 external rotation and 1/4 internal rotation on the NPT swivel fitting, suitable for 1/4 inch male NPT and 1/4 inch female NPT, which can be applied to standard threaded fittings and most common applications at home.
  • Practical function: this swivel air hose connector can be applied in the air inlet of the spray gun or pneumatic tool, providing an unhindered air path and improving flexibility between the hose and the pneumatic tools.
  • Quality material: this air line swivel fitting is made of aluminum, solid and reliable, featuring strong corrosion resistance and rust resistance, which can offer you a long service life.
  • What you get: you will get 2 pieces of 360 degree swivel air tool plugs and 2 pieces of 360 degree universal hose swivel connectors, which can be applied together to avoid you buying twice separately.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

Hromee Air Compressor Hose 3/8-Inch x 50 Feet Hybrid Hose with Fittings, 1/4”NPT Swivel Universal Coupler and Plug Kit

  • ... delivers 300-PSI for maximum working pressure..
  • HYBRID HOSE - The hose is constructed with hybrid which is blended rubber and PVC so it is lighter and less bulky than traditional solid rubber hose, more flexible and avoid binding, kinking, and tangling. Long using life is achieved in Hromee hybrid hoses..
  • SWIVEL END FITTINGS - One 360 degrees ball swivel end is equipped in the hoses. 1/4” FNPT brass swivel connectors never corrode, and seal better than aluminum, steel, or zinc. It is designed for avoid hose twisting that improves the reliability needed to get the best out of your air compressor and air tools..
  • COUPLER & PLUG KIT - Despite a swivel end, our engineers equipped with one 1/4'' NPT universal coupler which fits Industrial (I/M), ARO (A) and Automotive (T) and one I/M style plugs for connecting air compressor and air tools basically. The bend restrictors in the end of hose is for preventing kinking..
  • RANGE OF APPLICATION - Suitable for industrial, contractor, or household use. It is ideal for connecting supply lines,compressors, hose reels. With high visibility color yellow, you can quickly find your hose easily on a busy job site - then attach tools to the air supply..
Check Stock