Top System Fan Pin Pin

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

  • 15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
  • Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • 2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.
Check Stock

2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter

  • Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
  • 4 Pin Molex to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
  • Power three 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
  • Fans will be operated at the fixed Molex voltage of 12V. High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • 2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter.
Check Stock

YOUKITTY PWM Fan Splitter, 4-Pin Adapter Cable Y Splitter PC CPU Fan Splitter PC 4-Pin Fan Extension Power Cable 1 to 4 Converter 10 inch (2 Pack)

  • Connector 1: 4-pin female connector port..
  • Connector 2: 4-pin male connector (1 of which is 4-pin and 3 of which are 3-pin)..
  • Compatibility: the cable is compatible with all 4-pin and 3-pin chassis fan coolers and with 4-pin and 3-pin PMW fan connectors..
  • Functionality: a 4-pin female connector on one end connects to the motherboard port and a 4-pin male connector on the other end (1 of which is 4-pin and 3 of which are 3-pin) allows 4 computer case fans to be connected to a single motherboard fan header, with the fan distributor cable providing additional fans to increase airflow in your computer case..
  • Parameter specifications: Length 10 inches (25 cm) (approx.). Quantity: 2 pieces..
Check Stock

Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

  • Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous....
  • In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive....
  • For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no....
  • There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the....
  • RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated....
Check Stock

ITROLLE Fan Adapter Cable 4PCS 17.5cm/6.89inch 5 Pin to 4 Pin Fan Connector Converter Jack CPU Cooling Fan Extension Cable Wire

  • This cable is compatible with all 4 pin and 3 pin case fans !!!.
  • Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 4 Male Connectors at The Other End ( 1 of them is 4pin ,3 of them is 3pin ). The fan adapter has only one connector with a yellow RPM speed/tachometer line.
  • The Fan Splitter Connects 4 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case.
  • The length of the product (Approx): 10,5 inches, Color: Black.
  • !!! 4 pin extension cable - ASIN ‏: ‎B085MJPFVC !!!.
Check Stock

SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack

  • 15 pin SATA to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
  • Power three 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack.
Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • ...eadphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
  • 16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Processor - one 1156-pin connector, Power 12V - one 4-pin connector, Power - one 24-pin connector, Internal serial card - one 14-pin connector, Internal speaker - one 5-pin connector, PCI Express x1 (wireless card) - one 36-pin connector, Thermal sensor - one 2-pin connector, Intruder connector - one 3-pin connector.
Check Stock

CRJ 5-Pin Female PC Fan Adapter Cable for Dell Motherboards

  • Adapter Cable For Connecting Standard 3-Pin And 4-Pin PC Fans To A Proprietary 5-Pin Fan Header.
  • Designed For Compatibility With 5-Pin Fan Headers Found On Dell PC Motherboards.
  • Fully Functional 4-Pin PWM Fan Speed Control Support (3-Pin Analog Fan Speed Control Is Limited To Support By The Motherboard).
  • All Black Appearance And High Quality Construction Featuring High Density Black Sleeving And 22AWG Wiring.
  • Cable Length (Excluding Connectors): 6″/15cm.
Check Stock

ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter

  • 【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans..
  • 【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
  • 【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans..
  • 【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
  • 【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..
Check Stock

FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector

  • The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
  • The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
  • Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
  • Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
Check Stock

CERRXIAN 4 Pin PWM Fan Hub Splitter Power Supply Cable 1 to 5 Way PC CPU Cooling Case Fan Power Extension Cable for ATX Computer Case 4-Pin & 3-Pin Cooling Fans(14.8inch)(2-Pack)

  • 4-PIN INTERFACE :4-pin PWM fan power supply splitter extension cable can extend 1 CPU fan port to 5 fan ports to solve the lack of pc case fans ports and reduce the load on the motherboard..
  • EASY TO INSTALL :Just insert the PWM chassis fan splitter cable into the motherboard, and then paste the other end to the chassis with double-sided tape. No need to drive..
  • CONNECTOR TYPE :1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.Compatible with all 12V 4 pin and 3 pin PC case fans..
  • NYLON BRAIDED CABLE :15-inch fan HUB cable with black braided sleeve and tinned copper wire, lower resistance, stable and durable quality..
  • NOTE ：Only 1 interface supports speed measurement because the motherboard does not support multiple interfaces at the same time.3-pin does not support temperature control..
Check Stock