Top T Head Bolts Series

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

ARP 2543708 Pro Series 12-Point Cylinder Head Bolt Kit

  • Professional Series cylinder head bolts are premium fasteners for competition components.
  • Rated nominally at 200,000 psi, which is substantially stronger than Grade 8 hardware.
  • Wide area flanged head eliminates the need for valve train removal to facilitate cylinder head retorquing.
  • Features reduced wrenching 12-point style heads.
  • Comes complete with hardened parallel-ground washers.
Check Stock

PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion.
  • T-Slot Aluminum Extrusion M5x10 mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x8 mm Hex Socket Cap Screw Bolt.
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

POWERTEC 71703 Table Saw Sled and Blade Guard Kit w/T-Track, Miter Bars, Crosscut Bladerunner, Flip Stop, Bolt and Screws Set

  • INCLUDES: 24” universal t track, 19” HDPE miter bars, 3” flip stop, blade guard, flat head wood screws, hex head bolts and nuts.
  • FUNCTION: Provides you with an easy DIY kit that includes a t-track for mounting flip stops and fixtures, a premium 3” flip stop, blade guard and hardware needed to cut boards to precise lengths while preventing measuring and cutting errors.
  • 100% SAFE: Makes crosscutting safer, more efficient and convenient, while avoiding risking your limb when crosscutting smaller pieces with a crosscut sled specifically calibrated with your table saw.
  • PREMIUM QUALITY: The t-track included in this kit is made of solid extruded aluminum and the miter bars are crafted with high durability, high stability HDPE (high density polyethylene).
  • DIMENSIONS: Universal T-Track (24" long) | High Density Polyethylene bars 19" long x 3/4" x 3/8" | 3" Flip stop | Flat Head Wood Screws #6 x 1/2" | 1/4"-20 x 1/2" hex bolts | 1/4"-20 acorn hex nuts.
Check Stock

Original Aero Milk Chocolate Bubbly Bar 4 Pack Imported From The UK England

  • Compatible with T Plus Carbon Series, T Plus Aluminum Series and ZBS Aerobars.
  • Kit includes risers and bolts specific to the kit size.
  • Raises armrests and extensions together to maintain comfortable wrist position.
  • Not recommended for use with Carbon Styke.
  • 15mm Kit includes two 10mm risers, two 5mm risers.
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock

Pactrade Marine Boat Tracker Versatrack Adjustable Drink Holder/Lund Sport Track Folding Adjustable Cup Holder (Black, 1 pcs)

  • INCLUDES: (10) Seven Star Knobs, (10) T-Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal and double cut t-track – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies. Head is 17/32” wide and WILL NOT FIT ¼” T-TRACK. . Before ordering, please verify the width of your t-track..
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

Park Tool Preset Torque Driver, 5NM

  • ...mmended setting. Each tool is shipped pre-calibrated and tested for accuracy to industry standards (+/- 3%)..
  • 【EASY TO READ AND USE 】- This tool emits a click (that can be heard and felt) when a pre-set torque value is reached. A continent lock/unlock feature helps maintain desired torque values while tightening bolts. Force indicator markings on the wrench are clear and easy to read. Idea for use on stems, seat clamps, lever clamps, cranksets, rotors and more..
  • 【15PCS BIKE TOOL KIT】– Includes Hex: H2, H2.5, H3, H4, H5, H6, H8. Torx: T10, T25, T30. Philips Bits: PH1, PH2, PH3.Slot Bits: 4mm and 50mm extension bar for reaching concealed bolts. Bespoke protective molded case to keep the adjustable torque wrench and tool bits stored safely, also includes ‘storage’ section inside case to store bolts when using the wrench. Reversible 72-tooth ratchet head measures torque in clockwise and counter clockwise directions. Engage and release bit installment button.
  • 【PROFFESIONAL QUALITY AND WARRANTY】 - Our bicycle torque wrench sets are fully calibrated and tested for accuracy and come with a calibration certification provided for each tool..
Check Stock

Glarks 216Pcs 3030 Series Aluminum Profile Connector Set Include 20Pcs 3030 Corner Bracket, 40Pcs M6 T Nuts, 4Pcs 3-Way End Corner Bracket Connector, M5 x 20 Button Head Screw Bolts and Flat Washers

  • ♛【What You Get】: Our 3030 series aluminum profile connector set include 20pcs 3030 corner bracket, 40pcs m6 t-slot nuts, 4pcs 3-way end corner bracket connector, 40pcs flanged button head socket cap screws bolts, 40pcs flat washers and 40pcs lock washers, 32pcs allen head socket set screws, total 216pcs are well packed avoid mess..
  • ♛【Durable Quality】: The corner brackets are made of aluminum, the socket cap screws and nuts washers are made of high quality 304 stainless steel, anti-rust and corrosion resistance, can be applied for a long time, you won't worried broken after installed..
  • ♛【Easy to Use】: Our angle bracket is mainly uesd to reinforce right-angle corner joints of aluminum extrusion profiles, easy to use no tool needed. Insert the two ends of the bracket into the groove of the profile, put on the flat washer and lock washer, and tighten the screw to fix the two profiles..
  • ♛【3030 Series】: Our corner bracket set is fit for 3030 series aluninum extrusion, can be used DIY 3D printers, CNC routers, CNC laser cutters, robotics projects and so on..
  • ♛【Wide Application】: Our complete corner bracket kit are matched well with each other, can be widely used in home, office and factory area, like the connection of cabinets, tab....
Check Stock

PowerTec 71481 T-Track Knob Kit w/ 7 Star Threaded 1/4-20 Knobs T-Bolts and Washers for Woodworking Jigs and Fixtures 10 Pack

  • INCLUDES: (10) Seven Star Knobs, (10) T-Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal and double cut t-track – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies. Head is 17/32” wide and WILL NOT FIT ¼” T-TRACK. . Before ordering, please verify the width of your t-track..
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock