Top T Thread Rod

Lilibeely Shower Curtain Hooks Rings Rustproof 12PCS for Hotel Bathroom Shower Rods - Navy Blue Anchor Print

  • 【IDEAL SIZE】 Each shower hook measures 1.4"x1.4" to fit standard shower curtain poles.Suitable for rod of 8-28mm (0.3"-1.1") diameter.
  • 【HIGH-QUALITY RESIN】The durable construction and material allows years of use in the harsh bathroom elements..
  • 【EASY TO INSTALL】Simply thread through existing holes and hangover the shower rod.
  • 【UNIQUE DESIGN】Available in a variety of styles, designs, and finishes to complement existing decor.
  • 【DURABLE】Durable design that won’t detach or break when moderate stress is put on the curtain.
Check Stock

uxcell Round U-Bolts 4 Sets 0.63 16mm Inner Width 46mm Length Steel M6 with Nut Plate Washer

  • Hex Nut Size: 10 x 5mm / 0.39" x 0.2"(Hex Width*H).
  • Frame Plate Size: 50 x 18 x 2mm/ 1.97" x 0.71" x 0.08"(L*W*T).
  • Round Washers Size: 18 x 6 x 1mm / 0.71" x 0.24" x 0.04"(OD*ID*T).
  • Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates.
  • Material: Steel construct u bolt, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance, high hardness and good tensile strength..
  • Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. Just insert and tighten the nuts at both ends. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits..
Check Stock

ARTISANS CRAFT™ - Handmade Wooden Curtain Rod Brackets with Round Finials for Curtains, Natural Rosewood, Home Accessories | Window Treatment | Drapes

  • Decorative curtain rod finials for windows in your living room, dining room, bedroom, and more..
  • Compatible with 5/8" curtain rods. Thread Dia: M5, Thread Length: 0.51"/13mm. (Note: ONLY suitable for 5/8" curtain rods, Diameter: 15.8mm, if your rod is not 5/8" Diameter 15.8mm, please don't buy it )..
  • Classic design finials on either end provide a visually balance and special appearance, and match windows of multiple house styles..
  • Mounting Type: rod mounted, easy to screw into rod.
Check Stock

Home Décor Int'l Plain End Cap Finial for Window, Satin Nickel, Set of 2

  • Fit for curtain rod diameter（Max.):15.8mm/0.62"；Thread Dia:M5；Thread Length:13mm/0.51".
  • Material: Made of plastic material, is durable and strong for use..
  • Easy Installation: Easy to install without need for tools,Caps off each end of your curtain rod for an impactful,stylized design flourish.
  • Widely Application: Decorative curtain rod finials for windows in your living room, dining room, bedroom, and more.Good decoration for your home and office, makes it elegant and fashionable..
  • About Size : Please contact us if you're not sure if the size is fit for your curtain rod before you buy the Finials..
Check Stock

Bitray SA8T/K Rod End Bearing 8mm Inside Dia Male Thread Right Hand Self Lubricating Bearing - 4PCS

  • ◎【MATERIAL】 The rod end body is carbon steel, the galvanized environmentally friendly white zinc gasket material is copper inner ring (copper ball) material is bearing steel, quenched, the spherical surface is hard chrome plated, and there are left and right thread..
  • ◎【DIMENSION】Outside Diameter: 24mm.
  • ◎【PACKAGE INCLUDEDS】4 pcs x Rod End Bearing.
  • ◎【WIDELY APPLICATION】Widely used in machinery, power tools,automation equipment, CNC equipment, and so on..
  • ◎【CAUTION WHEN USING】 Where the press is missing or unavailable, the end sleeve joint bearing can be installed with an assembly sleeve and a hammer. The hammering force should be evenly transmitted to the entire circumference of the end surface of the end rod joint bearing ring, so the hammered end surface of the assembly sleeve should be made spherical..
Check Stock

6' CR-V Single Hook Two Claws Puller Separate Lifting Device

  • The product is forged from chrome vanadium steel, the overall high temperature quenching,strong and durable..
  • This tool is a carbon steel wire rod, T-shaped thread, not easy to slip, and the thread is firm, durable and labor-saving..
  • The reasonable design of the pulling claw,The 2-claw design makes it easy to grasp the gears and bearings and pull them out..
  • Ultra-thin Claw, high strength, with elastic metal resistance, The tip of the thimble is a heat-treated round head, not easy to damage other parts, easy installation..
  • specification:Pulling Diameter: 95mm,Screw Length: 165mm,Bracket Length: 159mm,Screw Diameter (top): 14mm,Screw Diameter (bottom): 13mm,Claw Length: 140mm,Claw Thickness: 3-5mm, For more size description please see size picture and video..
Check Stock

KastKing Patented V15 Vertical Fishing Rod Holder – Wall Mounted Fishing Rod Rack, Store 15 Rods or Fishing Rod Combos in 18 Inches, Great Fishing Pole Holder and Rack

  • ... reels to be staggered at different heights for minimum storage space..
  • INNOVATIVE DESIGN – This innovative fishing pole rack is simple and easy to use. Simply push the rod firmly into either the large or small v-grooves until the polymer grip material grabs the rod. For additional stability, hang the rod with the thread wrapped line guides just above the v-groove. The tapered v-grooves can accommodate up to a ½” diameter rod with a reel attached. To remove your combo from the fishing rod rack simply grab the rod near the rod rack and pull straight out..
  • DURABLE MATERIAL – The KastKing V15 fishing rod holder is molded with tough amorphous polymer material which is resistant to heat, chemicals, and impact. The v-grooves are co-injected with a tacky thermoplastic polymer material to ensure rods and combos are held securely in your rack and doesn’t damage or mar your rods..
  • SIMPLE INSTALLATION – KastKing V15 fishing pole racks have 3 mounting holes. 2 outside holes are 16” on center for secure installation on standard-spaced wall studs. To install the rack, determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, install anchor for center mounting hole, re-level....
Check Stock

Suburban - 1236.2037 12 Gallon Gas and Electric water Heater with Dark Spark Ignition

  • ...the water heaters from being worn down by corrosion, our water filter rods enhance the longevity of your water heater. You should gradually check the anode rod to see whether it needs to be replaced..
  • ✓ FOR SUBURBAN WATER HEATERS: This water heater tank corrosion prevention rod is 9.25’’ Long and 3/4’’ NPT Thread making it compatible with most RV Suburban and Mor-Flo 6 Gallon Water Heaters. It’s easy to install and replace and provides reliable use. We’ve included a replacement anode rod as well to make it easier for you to switch it when the time comes..
  • ✓ 100% CUSTOMER SATISFACTION: To us, customer satisfaction always has and always will be our top priority. Each of our RV Anode Rods are made with our customers in mind which is why we go the extra mile to acquire the finest materials on the market. We’re so confident that you’ll love our Magnesium Anode Rods that we offer a 100% Customer Satisfaction Warranty so that you know you’re making a Risk Free Investment..
Check Stock

VEWOGARDEN Wind Spinner Accessories, Wind Sculpture Spinner Poles and Metal Stakes

  • There are a total of 10 products in this set of wind spinner accessories. They are the poles, the base stakes, the bolts, and the stamens of the windmill(For details, please refer to the picture)..
  • The poles of the metal wind spinner are all 14.2 inches high, and there are 4 poles in total, 1 of which has a metal stake. There are 3 rods with threads, please pay attention to distinguish them when assembling. The rod without thread is the first, the rod with stake is the last. There is also a 2-prong ground stake that needs to be set on the last rod by yourself..
  • One part is in the shape of a "T" and is 6.3" H. There are threads on both ends, which is used to connect two large blades of garden wind spinner..
  • There are two small bolts 1.7" H, which are used to attach the large and small blades of the windmill. There are two stamens with a diameter of 1.7", which can make the windmill more beautiful..
  • The detailed installation method can refer to the picture. This accessory is suitable for 360° Outdoor Wind Spinner in our shop..
Check Stock

Ball Joint Kit,Set of (3) Tie Rod End with grease fitting Fits for Club Car DS Golf Carts (1976-2008)

  • Fits Club Car DS electric golf cart models 1976-2008.
  • Brand new high quality Club Car DS tie rod end ,Allows your steering and suspension the ability to perform properly..
  • Ball Joint,Left-Hand Thread(included 2Pcs),OEM#7540.
  • Ball Joint,Right-Hand Thread(included 1Pcs),OEM#7539.
  • Set of (3) Right and Left Thread Tie Rod End.
Check Stock

KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.).
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive..
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve ....
Check Stock

Hitena STWRAP Rod Wrapping Thread - Nylon Winding Thread Wraps Super Easy Sits Perfectly Flat on Blank Less Fuzzy Most Acclaimed by Professional Builders

  • Nylon Rod Wrapping Thread made with 100% nylon - Color Preserver required to keep its original color without fading.
  • Consistent tension makes wrapping much easier. Sits perfectly flat on blank and hardly forms fuzz during wrapping and upon finish razor cut.
  • Completely absorbs Finish Epoxy all the way down to the blank to form strong bond between guide foot and blank. Lifetime Guarantee for UV Color....
  • Size AAA is the thinnest and Size E is the thickest. If you need a thread for heavy load rod like saltwater, please go for Size D or E. Otherwise Size....
  • This is premium fine thread designed for rod building to fit into any wrapper in a tiny spool of 1 1/8" Diameter x 1 1/4" Height with 100yds in it (1....
Check Stock