Top T slot Grooving Bars

Hooke Road Overland HD Truck Bed Rack Adjustable Height Aluminum Ladder Rack for Toyota Tundra Tacoma Nissan, Rooftop Tent Carrier Cargo Storage Luggage Organizer

  • 【800 lbs Capacity】 - Maximum on-road rating of 800 lbs. Maximum off-road rating of 500 lbs. Carries luggage from snowboards, kayaks, surfboards, bikes, rooftop tents, lumber, and more.
  • 【Secure Your Load】 - T-Slot Attachments make adding gear mounts and accessories fast and simple. Accepts T-Slot accessories like Eye Bolts, Recovery Track Mounts, RotoPax Mounts, and Tool Holder(Not included). Integrated Tie Down Points that allow you to secure your load with ratchet straps or bungees. Integrated SKS (Same Key System) locks to secure your rack system to the truck bed.
  • 【Reinforced Structure】 - Heavy-duty aluminum alloy construction and durable textured black powder-coat finish. Reinforced structure with 4 adjustable bed side bars. Each side is equipped with 2 side bars and creates the ultimate truck bed cargo management system by adding these telescoping bars. Product Weight about 88 lbs.
  • 【Adjustable Bars】 - Adjustable height to create custom set-ups for maximum utility and versatility. Adjustable height from 18.7" - 23.5", adjustable side bars....
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock

PVC Plastic Floor Slotting,Groover Beech Wood Grooving Gouge Steel Slotting Knife Flooring Tools for PVC Plastic Floor

  • 【Durable in use】Made of beech wood and steel material, whic is hard and impact resistant, not easy to deform and durable..
  • 【Easy to use】Using newly upgraded beech wood handle with comfortable hand grip and easy to use..
  • 【Apply to】This slotting tool is suitable for PVC plastic floor grooving gouge, practical and powerful..
  • 【High Efficient】Adopt riveting method to lock, no rotation during slotting operation with high work efficiency..
  • 【Professional design】Come with 3 slotting spare blades, which make construction more convenient and quick..
Check Stock

MEIGGTOOL Three Gear Spoilboard Surfacing Router Bits, 1/2-Inch Shank,Lab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit

  • Easy To Use - Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine.
  • Material - Industrial grade C3 micro grain carbide blade, more sharp, smooth cutting, impact resistance, high toughness.
  • Wide Usage - This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking.
  • Feature: The MEIGGTOOL Surfacing Router Bit is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels..
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do..
  • The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut..
  • We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19” long by 3/4” by 3/8” UHMW bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or....
Check Stock

ZEROPLAY 360 Sled Kit

  • ZEROPLAY Miter Bar’s hassle-free miter bars using One-Touch Calibration..
  • ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0. 73" and 0. 79" wide and at least 5/16" deep..
  • Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks..
  • No slop, side-to-side play or seasonal warping..
Check Stock

PP Materials Easy to Use Strict Inspections Guaranteed Quality Woodworking Feather Board, Feather(Square feather board B blue)

  • ...prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • ✒【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • ✒【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • ✒【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherboard is a very professional woodworking tool that can be used for flip engraving machines, electric circular saws, table saws, band saws, ....
Check Stock

Dremel 124 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals , Gray

  • Dremel's versatile and simple-to-use carving bits make it easy to express your creativity..
  • The flame shape of the carving bit makes concave side cuts, V-bottom slots and grooves..
  • Carving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing..
  • Use on soft metals, plastics, and woods especially on curved surfaces.
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

MEIGGTOOL Spoilboard Surfacing Router Bits, 1/2-Inch Shank Round Nose, 2 Inch Cutting Diameter lab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit

  • Size - Precise 4 Wings can cut your project material quickly and cleanly. Shank: 1/2".
  • Easy To Use - Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
  • Material - Industrial grade C3 micro grain carbide blade, more sharp, smooth cutting, impact resistance, high toughness.
  • Wide Usage - This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking.
  • Feature: The MEIGGTOOL Surfacing Router Bit is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels..
Check Stock

Luwint Freestanding Barbell Holder, Floor Stand Vertical 6 Bar Storage Rack for 2'' Olympic Bars

  • Freestanding Barbell Storage - Solid and stable bar storage balances great with just the 70 lb. 89’’ long safety squat barbell in any of the slots without tipping. The base stays in place without mounting to protect your home gym floor.
  • More Space between Bars - Design the holes for the bars not too tight of spacing together to make getting around and access and pull a bar out of the barbell holder a bit easier.
  • Great for Universal and Specialty and Larger Diameter Bars - 2’’ Storage tube holds a wide variety of bars easily, even the trap bar on the slot and it still leaves room for other bars, including Olympic bars, curl bars, triceps bars, multigrip bar, EZ-Bars, Hex Bars, safety squat bar, strongman axle bar, thick grip dumbells handles.
  • Each of the holders in this unit is sleeved with a protective plastic insert to protects your bar ends from getting scratched.
  • Simple assemble needed. 37’’L x 22’’W Stand, 8.3’’H slot, 23.2lbs..
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 2” Cutting Dia Insert Carbide Slab Flattening Grooving T-slotting Woodworking Milling Cutter Tools By ROOCBIT

  • Used for T-slotting and bottom cleaning. 1/2" Shank.
  • 3-wing design, resulting in a more balanced tool while running..
  • The blade is made of hard alloy, the life is several times the life of ordinary milling cutter, the blade can be removed and replaced, saving processing cost.
  • Use anti-seiamic high-grade diamond material, Can effectively suppress vibration and improve seismic strength. The whole blade body is electroplated to prevent rust..
  • Seiko build, screw offset design, close combination of reinforced blade and knife groove, enhance rigidity, better processing effect..
  • We provide 1-Year Worry-Free Warranty and Unconditional 90-Day Refund & Free Lifetime Technical Support. Buy with confidence..
Check Stock