Top T8 Lamp Fitting

Goodlite G-20232 F32T8/850/ECO Straight 32 Watt 48-Inch Inch 800 Series T8 Fluorescent Tube Light Bulb 30 Pack Super White

  • G13 Medium Bipin, 48" long, Good Efficiency 75% less energy than incandescent,.
  • 3500 Lumens More than 100++ lumens/watt (efficacy) Bulb Meets Federal Minimum efficiency Standards.
  • Brand Cross Reference F32T8/830/ECO - F32T8/SPx30/ECO - F32T8/TL850/ALTO - FO32/850/ECO -F32T8/XL/SPX50/ECO - F32T8/TL850 PLUS/ALTO -FO32/850/XP/ECO.
  • CRI 85 800 series high quality triphosphor coding Energy efficient, an environmentally responsible lamp low mercury meets TCLP requirements.
  • Works with INSTANT / RAPID Start Fixtures, Long Life: 25,000 hour ,Bulbs sleeved safe wile shipping.
Check Stock

20-Pack JACKYLED Screw Type T8 Lamp Holder with Wires UL Non-shunted Tombstone Light Socket for LED Fluorescent Tube Replacements

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 608V. Great for retrofitting your fluorescent....
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 108% safe from fire hazard, durable even after years of....
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 25 AWG Wire. Just connect the wires, plug the....
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between....
  • 108% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience.....
Check Stock

CNSUNWAY LIGHTING 8FT LED Bulbs, 45W 5400LM Super Bright, 5000K Daylight Glow, Frosted Cover, Ballast Bypass, High Output, T8 T10 T12 Single Pin LED Fluorescent Replacement Bulb(4 Pack)

  • 【Connectable】-8FT LED shop lamps can be connected with seamless connectors or T8 connector wires. (Please do not exceed 4 in series at a time) Replace the 150W fluorescent lamp..
  • 【EASY INSTALLATION】 - Easy to replace the traditional fluorescent tube lamp fixture, hard-wired, plug in with T8 power cord. Package comes with T8 metal clips brackets, screws, small connector, a on/off switch power cord and pigtail power cable. You can install these led tube lights on the wall or ceiling..
  • 【EYE PROTECTIVE】 T8 LED Tube Lights with bracket(Integrated) - Daylight white glow 5000 Kevin with clear cover and provide high output. These 8FT lights can be used Indoor shop, grocery, flea market, garage, warehouse, workbench, basement, laundry room, photo studio, gymnasium, practice room...
  • 【HIGH OUTPUT】 - This LED light fixture has 384 LED chips, high output and it will emit up to 9360 lumens bright lighting..
  • 【QUALITY ASSURANCE】 - This 8FT LED Tube Light Single Fixture have 3 years warranty, easy and fast replacement is offered if any quality issue..
Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

EFAYCRR (6 Pairs) Tombstone Base Holder Socket Connector with T8 T10 T12 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger Lampholder

  • 【UL Standard】Single Pin T8 lamp holders are UL listed.Made of Flameresistant material..
  • 【Widely used 】FA8 tombstones fit for all kind of T8 T10 T12 single pin fluorescent and LED tube lamp, advertising light box and more.Perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly..
  • 【Electronic Parameter】Max Current 6A, Max wattage 660w,Voltage: 100-600V..
  • 【Easy to install】Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube..
  • 【Package included】6 Pairs Single Pin FA8 Sockets for 10 tubes (without cable).
Check Stock

3.4.7

  • Standard Instant Start T8 Ballast will accept up to 4 or 3 F32T8 lamps.
  • Slim profile with mini can housing for portability.
  • Instant start electronic ballast for long lamp starting cycles and low initial cost.
  • Anti-striation circuitry helps to eliminate and prevent the spiraling effect from lights.
  • Mounting dimensions: 8.9-Inch L x 1.1-Inch W, Mounting slot set 0.3-Inch apart.
Check Stock

SinLoon UL-LP Certification T5 T8 LED Lamp Connecting Wire Ceiling Lights Daylight LED Integrated Tube Cable Linkable Cords for LED Tube Lamp Holder Socket Fittings with Cables(6.5FT/2M,2-Pack)

  • Item name: UL certified power cord T5 /T8 Double Connector. Length: 200Cm（6.5 foot）. Specification: 3 * 0.824㎡ copper wire. Working voltage range: 110V-250V. Max Output: 6A. Materials: PVC insulation. The long-term service temperature is 80℃~105℃..
  • UL Certified power cord A perfect solution for connecting led strip with controller or strip to strip connection..
  • UL Listed extension cord the products are through 100% aging test and strict quality control.No need welding,no need soldering,easy use..
  • UL-LP Certification T5 T8 LED lamp connecting wire used for fluorescent lamps, LED lamps, advertising light box (shop illuminated signs) halogen, filament or CFL light bulb and more..
  • Package: 2 pcs T5 T8 LED lamp connecting wire+4pcs Clips（Note: Not suitable NVC lighting and sanxiong pak lighting !）.
Check Stock

Sunlite F32T8/SP841 32-Watt T8 Linear Fluorescent Light Bulb Medium Bi Pin Base, 4100K, 30-Pack

  • G13 Medium Bipin, 48" long, Good Efficiency 75% less energy than incandescent, CRI 75.
  • 3250 Lumens More than 100++ lumens/watt (efficacy) Bulb Meets Federal Minimum efficiency Standards.
  • Environmental responsibility low mercury meets TCLP requirements, Brand Cross Reference F32T8/741/ECO-F32T8/SP41/ECO-F32T8/TL741/ALTO-FO32/741/ECO.
  • Works with INSTANT / RAPID Start Fixtures, Long Life: 20,000 hour ,Bulbs sleeved safe wile shipping.
  • Energy efficient, high energy savings in an environmentally responsible lamp.
Check Stock

Keystone Technologies KTEB-226-1-TP Electronic CFL Ballast

  • rogrammed Rapid Start T8 Ballast will accept up to 2 or 1 F32T8 lamps. Accommodates multi-voltages from 120 to 277-volts.
  • Runs quietly with most 120-volt applications, less than 10-Percent Total Harmonic Distortion.
  • Ballast factor rating of Low .77 for low power maximum savings, ballast factor rating controls light output and wattages of each lamp..
Check Stock

The Axiom

  • ✔ Ballast Removal required : Remove the ballast before you install these T8 4ft led bulbs 2pin ends！.
  • ✔ SAVE 65% INSTANTLY - Save 65% on your electricity bill. Replace 80 Watt fluorescent tubes with 28 Watt LED Tube lights (Lighting output 2640 lumens) ..
  • ✔ HIGH BRIGHTNESS - Using imported high brightness LED as light source,Brightness is three times as the same power traditional light source.
  • ✔ EASY INSTALLATION - Can be installed on the traditional G13 4FT T8 lamp socket, bypass the starter and ballast before installation.This 4ft led bulb is double-ended connection. Fast, simple and secure installation..
Check Stock

Technical Precision Replacement for SUNPARK SL15T Ballast

  • Specifications: 120 Volts, T8 and T12 Ballast with Rapid Start Method, Minimum Starting Temperature -10 F Degrees.
  • Lamps Operated: (2/1) F32T8, (2/1) F25T8, (2/1) F40T12, (2/1) F34T12, (2/1) F30T12, (2/1) F25T12, (2/1) F20T12 Linear Tubes or (2/1) PL-T32W, (2/1) F26TBX GX24q-3, (2/1) F26DBX G24q-3, (2/1) F36BX/2G11, (2/1) F39BX/2G11, (2/1) F40BX/2G11 4-pin CFLs.
  • Disclaimer: Technical Precision recommends double-checking specifications of your lamp, fixture, device, and/or appliance as well as the dimensions of your old item before purchasing our products. This item is a Technical Precision replacement product and is manufactured by Technical Precision. If you have questions, inquiries, or feedback, please do not hesitate to contact our customer support..
Check Stock

Fulham Lighting WH5-120-L Workhorse 5 Adaptable Electronic Fluorescent Lamp Ballast

  • LAMP COMPATIBILITY: Combination of 128W max.
  • CFT-4P, CFQ-4P, CFTR-4P, CFM-4P, 2D-4P, CR22-4P, CR32-4P, CR40-4P, Linear T4, T5HO, T8, T8HO, T10, T12, and T12HO.
Check Stock