Top T8 Lamp Fluorescent Lighting
EFAYCRR (6 Pairs) Tombstone Base Holder Socket Connector with T8 T10 T12 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger Lampholder
- 【UL Standard】Single Pin T8 lamp holders are UL listed.Made of Flameresistant material..
- 【Widely used 】FA8 tombstones fit for all kind of T8 T10 T12 single pin fluorescent and LED tube lamp, advertising light box and more.Perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly..
- 【Electronic Parameter】Max Current 6A, Max wattage 660w,Voltage: 100-600V..
- 【Easy to install】Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube..
- 【Package included】6 Pairs Single Pin FA8 Sockets for 10 tubes (without cable).
Check StockGhiuop 25-Pack T8 LED Bulbs 4 Foot Tube Light, 4ft LED Shop Garage Warehouse Light, 20W 5000K 2600LM Daylight White, Fluorescent Lights Tube Replacement, Ballast Bypass, Dual-end Powered, Clear Cover
- 【5000k Super Bright & Energy Saving】This T8 LED bulb has 2600+ lumens and a CRI rating of 80+. Each 4ft led light tube has a low power consumption of 20w, instantly saving you 60% on your electricity bill when you replace your old 40 watt fluorescent tube with 20w LED lamp. The LED t8 light tube bulbs are widely used in shop, warehouse, garage, mall, hotel, office, convenience store, gas station, parking lots etc..
- 【Premium Quality & Long Lifespan】: T8 LED bulbs are made of aluminum. Compared with the glass light tube, Ghiuop light tubes not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years). Reduce led light tube replacement frequency, saving money and time..
- 【Reliable Lighting & Shatterproof 】Zero flickering light, zero delay, and zero worries with 48" LED t8 lights that provide high quality indoor and outdoor lighting. The 4ft led bulbs have been packed very well with Styrofoam cushioning and end cap to protect them. t8 led light has shatterproof property because it is equipped with an aluminum body and a frosted lens..
- 【Easy Ballast Bypass Installation】Fluorescent replacement is simp....
Check StockFour-Bros Lighting LED High Bay Light 6 Lamp 5000K Daylight White, 5 Year Warranty, Industrial Grade, Warehouse, Shop, Garage Lighting - UL Listed, DLC Approved, Made in USA, BAA Certified, Pack of 6
- #1 Rated Made in USA LED High Bay. BAA Certified Fixture.
- ✔ Single-sided 18-watt LED T8 tubes included with every LED High Bay purchase✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays must be wired to operate 6 LED T8 Tubes.
- ✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays are rewired to operate 6 LED T8 Tubes17,160 Lumens (Brighter than Fluorescent T5HO) 5000K Daylight White Color Temp.
- ✔ HOW DOES IT WORK - Each high bay Fixture comes with all the wiring and tombstones needed to be installed on the field. THESE DO NOT COME PREWIRED..
- ✔ 5 YEAR WARRANTY - Buy with confidence, risk-free. Four Bros Lighting five-year warranty got you covered! Contact us for an easy and fast replacement..
Check StockNYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!
- Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
- Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
- All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
- T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
- 2-year, warranty does not require registration.
- however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check StockLuxrite 12-Pack 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC
- ...sed to change between 3 cct color temperatures. Enjoy your lights at 3500K natural white, 4000K cool white, or 5000K bright white. Feel free to adjust your lights further by taking advantage of the dimming feature when using a dimming capable ballast..
- PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
- BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
- CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the next 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted cover and is shatterproof which allows for safer installation compared to....
Check StockLUXRITE 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC (4 Pack)
- ...sed to change between 3 cct color temperatures. Enjoy your lights at 3500K natural white, 4000K cool white, or 5000K bright white. Feel free to adjust your lights further by taking advantage of the dimming feature when using a dimming capable ballast..
- PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
- BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
- CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the next 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted cover and is shatterproof which allows for safer installation compared to....
Check Stock(Pack of 25) CNSUNWAY 4FT LED Light Bulbs, 22W 2400LM 6000K Super Bright White, Type-B Remove Ballast, Double-Ended Power, Frosted Cover, T8 T10 T12 Flourescent Light Bulbs Replacement
- ✔EASY REMOVE BALLAST INSTALLATION – CNSUNWAY T8 4 foot led bulbs are easily fitted to replace traditional T8 T10 T12 fluorescent bulbs. Please must remove the starter and ballast before installation.Failure to do so will cause irreparable damage to the led tube! Product must be installed by licensed electrician or technician with electrical safety knowledge..
- ✔ENERGY SAVING – CNSUNWAY 4ft led light tube has 2400+ lumens high output with only 22 watts power consumption.Comapared with fluorescent tube,it could save up to 65% on your electricity Bill!.
- ✔FLUORESCENT LIGHT BULB REPLACEMENT – CNSUNWAY T8 4ft LED light tube is ideal replacement for T8 T10 T12 led fluorescent light bulb. It’s compatible with existing T8, T10, and T12 fluorescent fixture, making LED conversion easier than ever..
- ✔HIGH QUALITY LIGHT TUBE- CNSUNWAY shatterproof 4ft T8 LED tube adopts high quality LED chips, offers sustained high brightness with a long lifespan, no flicker, no noise, non-polluting..
- ✔HASSLE FREE WARRANTY – CNSUNWAY LIGHTING offers 24/7 after sale service and 2-year unlimited warranty! If you have any question, pls feel free to contact with us for a quick solution..
Check StockAqueon Modular LED Aquarium Light Fixture, 20-inch
- Slots for two additional LED lamps of your choice: Day White, Colormax, Beauty Max or Max Blue.
- Changing LED lamps are easy to snap in and out to customize the look of your aquarium.
- Use up to 70% less energy than T8 fluorescent lamps.
- Fits Aquarium Size 10, 20 Extra High, 35 Hexagon.
Check StockFeit Electric T848/865/B/LED/2/5 4FT T8 LED Tube Light, Type B Ballast Bypass, 18W=32W, 6500K Daylight Deluxe, Double-End Powered, F32T8 Fluorescent Tube Replacement, Damp Rated, UL, 10-Pack
- F32T8 FLUORESCENT TUBE REPLACEMENT - standard 4 Ft LED Linear tubes are designed to replace T8 fluorescent tube.
- the 4' T8 LED light works with standard 120 volts or 277 volts and requires a ballast bypass installation.
- EASY DOUBLE-ENDED CONNECTION INSTALLATION - This UL-Listed T8 LED tubes are dual-end powered.
- Direct wiring to eliminate the need of ballast.
- the non-dimmable energy efficient 4 ft T8 LED tube light can save upto 44% on your electric bill.
- LED TUBE DAYLIGHT DELUXE - This 6500K light temperature stimulates full spectrum light! It is recommended for an area for reading, craft rooms, and task lighting.
- This light is used where you desire a vibrant, bright light to see all the details needed.
- FEATURES - The 32-watt equivalent shatter resistant coated T8 LED light bulb only uses 18 watts and produces 1800 lumens and lasts upto 35,000 hours.
- Has instant on brightness and no flickering.
- Save money and time by switching to energy efficient lighting.
- UL LISTED – Feit electric uphold the highest standards for all our products with optimal performance and safety.
- With 40+ years of experience in lighting, we are the leader in lighting innovations.
Check StockJESLED Non Shunted LED Tombstones - (Pack of 50) T8 Lamp Holder, UL Turn Type Tombstone Lampholder for T10 T12 LED Fluorescent Tube Replacement, Medium Bi-pin G13 Socket for Programmed Start Ballasts
- 【Electronic Parameter】: 660W max wattage and 600V the maximum voltage, this Bi-pin T8 tombstone fit for all kind of T8 T10 T12 fluorescent tubes..
- 【UL Standard】: These T8 lamp holders are UL listed. They are made of high quality PBT material which is very durable and fireproof, and makes it the ideal for replacing old florescent lamp holders, 100% safe from fire hazzard, heat resistant..
- 【Easy to Install】: These T8 lampholder are very easy to be used for both dual end powered and single end power fluorescent tubes, connect with 18 gauge power wires, it is very easy to install a light in this socket..
- 【Ideal for 4FT LED Bulbs 】: This non shunted led tombstone is widely used for T8 4ft led bulbs. If you need high output 4ft led bulbs, please search "B07F73PSRY", "B074QP6PNH", "B07CWXT5R1" or "B07LFJ27JH"..
- 【Hassle-free Warranty】 - JESLED offers 3-year unlimited warranty means we've got you covered! Contact us for an easy and fast replacements..
Check StockFeit Electric T848/850/B/LED/2/5 4FT T8 LED Tube Light, Type B Ballast Bypass, 18W=32W, 5000K Daylight, Double-End Powered, F32T8 Fluorescent Tube Replacement, Damp Rated, UL, Pack of 10
- F32T8 FLUORESCENT TUBE REPLACEMENT - standard 4 Ft LED Linear tubes are designed to replace T8 fluorescent tube.
- the 4' T8 LED light works with standard 120 volts or 277 volts and requires a ballast bypass installation.
- BALLAST BYPASS INSTALL (DIRECT WIRE) - Direct wiring to eliminate the need of ballast.
- Not compatible with single-ended powered sockets.
- LED TUBE DAYLIGHT - This 5000K light temperature stimulates full spectrum light! It is recommended for an area for reading, craft rooms, and task lighting.
- This light is used where you desire a vibrant, bright light to see all the details needed.
- FEATURES - The 32-watt equivalent shatter resistant coated T8 LED light bulb only uses 18 watts and produces 1800 lumens and lasts upto 35,000 hours.
- Has instant on brightness and no flickering.
- Save money and time by switching to energy efficient lighting.
- UL LISTED – Feit electric uphold the highest standards for all our products with optimal performance and safety.
- With 40+ years of experience in lighting, we are the leader in lighting innovations.
Check StockDysmio F32T8 32-Watt 48-inch Tube Light Bulb, 4100K, 2950 Lumen, G13 Medium Bi-Pin Base T8 Fluorescent Light Bulb with Cool White Light - Pack of 4
- ...E LIGHT BULB: Dysmio Medium Bi-Pin Base T8 Linear Tube Light is a product designed for lighting up the whole room with its Cool white light. It comes with a Color Rendering Index of 85 which is crisp and comfortable for the eyes, setting a calm tone to the room with the flick of a switch..
- ENERGY SAVER: Dysmio F32T8 Fluorescent light bulbs are very energy efficient, consuming just 32Watts of power to produce brightness of 2950 Lumen and have an average life span of 21.9 years and yearly cost on electricity is less than $4..
- LONG LIFE: Dysmio fluorescent light bulbs are long-lasting. When an average incandescent has a life of just 1000 hours the Dysmio Medium Bi-Pin Base T8 Straight Tube Light shines bright for an average of 24000 hours which is more than 24 times than that of the normal incandescent..
- EASY INSTALLATION: The fluorescent light bulb comes with a G13 base which is very common for T8 Tube Lights, you can just put the Bi pin base into the socket and turn it in to place. This makes the product installation a hassle-free process..
- VERSATILE AAPLICATIONS: The Dysmio Linear Tube Lights are RoHS Compliant has a color temperature of 4100K which is also usually used for productive environment. This makes the product ideal for commercial and industria....
Check Stock