Top Table Saw Blade For Ripping Oak

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

  • 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
  • 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
  • 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control table saw stand and provide overload protection. And the 10 inch table saw can be used without the stand which is convenient for outdoor wood cutting..
Check Stock

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

  • ...reates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”. Gain complete control of both side of stock on your rip cuts.Helps reduce kickback while keeping your hands above and away from the saw blade..
  • THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
  • USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut..
  • COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assembly required. Other push blocks require frustrating installation with tons of moving ....
Check Stock

3Pack Combo 7-1/4 Inch Circular Saw Blades with 5/8\ Arbor, TCT ATB 24T Framing, 40T Crosscutting, 60T Finish Saw Blade for Various Wood Cutting

  • DIMENSIONS - Includes 1pc 7-1/4 Inch 24T Framing Saw Blade, 1pc 7-1/4 Inch 40T Ripping & Cross Cutting Saw Blade, 1pc 7-1/4 Inch 60T Finish Saw Blade, 5/8 inch Arbor, with a nice storage case..
  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP..
  • COMPATIBILITY: Can used in corded and cordless circular saws, miter saw and table saw..
Check Stock

Table Saw - ARNOT 15 Amp 10 in. Compact Portable Jobsite Table Saw with Folding Stand, 36T Blade, Cutting Speed Up to 5000RPM, 45ºDouble-Bevel Cut, Benchtop Table Saw for Woodworking

  • ✅Functional Diversification - 10-inch Jobsite table saw has a 15-amp motor with 5,000 rpm and is designed for ripping and crosscutting general lumber, hardwood, plywood, and composite lumber materials. It can perform the toughest DIY or professional jobs..
  • ✅Portability and practicality - Lightweight and durable metal tube carrier with adjustable legs and non-marring feet provide stability and support for material feed control.
  • ✅Operational safety - The table saw includes blade guards, clear guards and riveting knives to protect you from accidental injury and flying debris..
  • ✅Precise Scaling-This table saw maximizes accuracy and capability, the table saw offers 90°-3" cross cuts and 45°-2-1/2" bevel cuts. And the portable table saw has a large handwheel to control the lift of the saw blade for different needs..
  • ✅Smooth Cut - Coated aluminum countertops have a 26-inch rip capacity that easily rips through larger wood materials, reducing additional friction and allowing for a smoother glide..
  • ✅Enjoyment & Service - Our items come with a 3-month after-sales guarantee for you. We offer 45 days return.
Check Stock

Gunpla 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Gunpla 3 Pieces 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Tool School: The Complete Guide to Using Your Tools from Tape Measures to Table Saws

  • Micro-Make Super Value Packages Are An Economical Way To Expand Your Workshop Or Get Involved In A New Hobby..
  • Take our best-selling saw, add some of our most popular accessories for it, and what do you get? A versatile mini woodworking and metal cutting workstation like no other..
  • Package includes: MicroLux Tilt Arbor Table Saw, 40 Tooth Carbide Tip Saw, Taper Jig, Ripping Gauge Set, Featherboard and Fence Set Blade, Angle Setter/Protractor, Ferrous Cut-Off Disk, and Blank Blade Plates.
  • Value if purchased separately is $529.60!.
Check Stock

IRWIN Tools MARATHON Carbide Cordless Circular Saw Blade, 6 1/2-Inch, 24T, .063-inch Kerf (24029CL)

  • Circular saw blades have an ultra-thin kerf for more cuts per charge.
  • Each circular saw blade has face-ground, carbide-tipped teeth that produce fast, clean cuts.
  • Aggressive, 22° hook angle for swift cuts.
  • Construction-grade teeth provide longer life.
  • Circular saw blades are designed for framing and ripping.
Check Stock

Huanyu Mini Table Saw Upgraded 300W 13000RPM Portable Precision Table Saws Set for DIY Crafts Woodworking 0-180 Angle Cutting Multifunctional 1.14IN Cut Depth 7-Level Speed Adjustable (Group 3)

  • Tip: Different materials need to be cut with different saw blades.
  • This is a small amateur table saw, so it is not suitable for cutting longer and thicker materials, such as hardwoods like walnut, oak, birch, etc.
  • The size of the material to be cut does not exceed the size of the panel 10x10cm/3.9x3.9inch and the thickness of the material to be cut does not exceed 19/32inch..
  • Application: You can use this portable mini table saw to make woodworking and crafts. With 4 types of saw blades, meet your need to cut various materials: Metal materials such as Iron, Aluminum alloy and stainless steel.
  • Wood materials such as thin wood, small wooden sticks, etc..
  • Adjustable: 96w 7-speed regulating power supply, you can adjust the cutting speed according to your needs.
  • The height of the saw blade from the table is adjustable, ranging from 0-19/32 inches.
  • The cutting depth is adjustable, ranging from 0-1/2 inches, not exceeding the height of the saw blade 19/32 inches..
  • Portable:This table saw is very mini and portable, 7x5.5x3.
Check Stock

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

  • Protect hands and prevent kickback like never before.
  • Powerful high-friction durable grip for extreme hold.
  • Precision cutting and control down to 1/4" Ripping.
  • Work with small stock safely on the table saw, Router table, Jointer, & Band saw.
  • Designed in USA. A true MICROJIG Innovation..
  • 3-Directional Force for total control of the workpiece.
Check Stock

WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw

  • Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts.
  • Create 45-degree bevel cuts in boards up to 1-5/8 inches thick.
  • Perfect for ripping boards or for performing internal plunge cuts.
  • Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor.
  • Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps.
Check Stock

5-4/5' 52 Teeth Carbide Tip Circular Saw Blades Radial Arm Saw Blade Table Saw Blade Miter Saw Blades with 4/5' Arbor for Woodworking

  • Saw Blades Specifications - 5-4/5" Ultra-thin kerf Wood Cutting Circular Saw Blade for fast cutting, Teeth: 52T, Diameter: 5-4/5"/ 147mm, Arbor: 4/5"(20mm), HI-Density Carbide Tip for Maximum Performance.
  • MAX RPM - 10000, Kerf: 0.055"/1.4mm, Hook Angle(forward): 20 Degree, Tooth design: ATB, Fast and Smooth Cuts..
  • ATB Tooth Design to facilitate splinter discharge and to prevent the saw blade from being blocked by sawdust, make cutting easier. Extra-hard steel blade body - delivers accuracy and resists bending and deflection for true cuts..
  • Laser cutting Anti-Vibration Slots can drastically reduce vibration and sideways movement during the cutting process, Also help channel heat build-up during the cutting process, allowing the blade to expand and contract, extending the blade life..
  • Upgraded to Teflon surface coating, strong non-stickiness, lowest friction coefficient, anti-adsorption, high-temperature resistance. Smooth and efficient rotation..
  • Ideal for ripping and crosscutting on softwood, hardwood, plywood, chipboard with fine finishing, not for metal cutting. Widely use for Circular Saws, Miter Saws, Table Saws, Hand Saws, and Chop Saws, save your time and energy..
Check Stock