Top Table Saw Fences 2

Bosch Js365 Jigsaw Top Hndl 6.5A

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • ... full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simply be flipped it up and out of your way when not in use..
  • The Fulton Aluminum Miter Fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. On the back, there is an offset track for mounting the fence to a miter gauge..
  • The fence can be mounted to low profile miter gauges or standard profile miter gauges simply by fl....
Check Stock

Magswitch Dual Roller Guide Attachment for Magswitch Workholding System

  • -The Magswitch Dual Roller Guide is the ultimate third hand when you are doing the most difficult and dangerous woodworking projects on a bandsaw or general infeed outfeed support on tables and fences..
  • -SUPPORT: The dual roller guide helps support a tall panel or hold down a long piece of wood and steady your resaw projects..
  • -FEATURES: A dual set of roller bearings provide firm yet smooth glide of wood through a saw blade and micro adjustment for fine tuning to 90 degrees..
  • -EASY SET UP: The dual roller's low profile design allows for fast, strong set up anywhere on a steel table or cast iron fence, even on the smallest table..
  • -INCLUDES: Dual roller guide and all required attachment hardware..
  • Features a dual set of roller bearings for firm yet smooth glide of wood through a blade..
  • Includes micro adjustment for fine tuning to 90 degrees..
  • Ideal for re-sawing on band saws, a second hand to hold raised/long or tall panels against a fence on table saws, general in-feed out-feed support on tables or fences..
  • Built from strong and durable ABS UL94VO material for years of use..
Check Stock

22-540 22-560 22-580 34-080 36-610 TP400LS TS300 1400 PC305TP Carbon Brushes Compatible with Delta & Porter Cable Planer 2Pcs

  • Compatible with Porter Cable 1400 Type 1 14 inch Abrasive Cut Off Machine 1400 Type 2 14 inch Abrasive Cut Off Machine 1400 Type 3 14 inch Abrasive Cut Off Machine PC305TP Type 1 12 inch Planer.
  • Compatible with Delta 22-540 Type 1 12 inch Planer 22-540 Type 2 Planer 22-560 Type 1 Planer 22-560 Type 2 Planer 22-565 Type 1 Planer 22-580 Type 1 Planer.
  • Compatible with Delta 20-150 Type 1 Cut Off Saw TS300 Type 1 Bench Table Saw 34-670 Type 2 10 Inch Table Saw 34-670 Type 1 10 Inch Table Saw TP305 12-1/2" Portable Planer 34-080 Type 1 10" Miter Saw 34-080 Type 2 10" Miter Saw.
  • Compatible with Delta 36-600 Type 1 Table Saw 36-600 Type 2 Table Saw 36-610 Type 2 Table Saw 36-610 Type 1 Table Saw TP400LS Type 1 12-1/2" Planer TP300 Type 1 Plane.
Check Stock

BOSCH CM10GD Compact Miter Saw - 15 Amp Corded 10 In. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade & 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

  • Product 1: ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment.
  • Product 1: CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup..
  • Product 1: CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch.
  • Product 1: COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do..
  • Product 2: Powerful table saw has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross cutting of fine and rough materials.
Check Stock

Beslands Backlight Digital Level Box Protractor Angle Finder Gauge Bevel Gage Inclinometer with Aluminium Framework Magnetic Base Saw Electronic Finding

  • Working Temperature: 32°F to 122°F (0℃ to 50℃)..
  • Strong Magnetic Base - Firmly fixed on saw tables, fences, blades and other metal surfaces.
  • reversible display reversed when inverted..
  • Easy carrying - Compact and lightweight, constructed of aluminum alloy and ABS, this magnetic miter gauge is compact and lightweight..
  • Energy Saving - Just one AAA battery (not include) can keep this energy-saving level gauge working for more than 50 hours..
  • Wide Range of Applications - this digital angle gauge can be used for in auto repair, machine manufacturing, table saw or miter saw blade lever measurement, constructional engineering, and for construction, woodworking, machinery, telecommunications, automobile etc..
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Wish You Were Here

  • ⭐UNIVERSAL FIT:Switch 489105-00 On-Off Toggle Switch For Compatible with Delta Table Saw.
  • ⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
  • ⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
  • ⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch re....
Check Stock

DW705 DW708 DW715 DW361 DW359 DW362 DW744 DW744SB Carbon Motor Brushes Compatible with DeWalt Miter Saw Circular Saw Table Saw (2 pcs)

  • Compatible with Dewalt: DW705-220 Type 1/2 12 inch Miter Saw DW705S Type 5/6/7/8 12 inch Compound Miter Saw DW705 Type 1/2/3/4/4A/5/6/7/8 12 Inch Miter Saw DW708 Type 1/3 Crosscut Miter Saw DW744S Type 2/3 Jobsite Table Saw DW744 Type 1/2/3 Jobsite Table Saw DW361 Type 1/2 Circular Saw DW357 Type 1 Circular Saw DW358 Type 1 Circular Saw..
  • Compatible with Dewalt: DW359 Type 1/2/3/4 Circular Saw DW360 Type 1/2 Circular Saw DW362 Type 1/2/4 Circular Saw DW364 Type 1/2/3/4/5 Circular Saw DW384 Type 1/2/3/4/5 Circular Saw DW744SB Type 3 Table Saw DW715 Type 1 Miter Saw DW364K (Type 3) 7-1/4" 184mm Circular Saw Kit..
  • Compatible with Black-Decker: 2694 7-1/4" Industrial Strength Sawcat 3057-48 Type 1 7 1/4 Saw Cat 3057 Type 1 7 1/4 Circular Saw 3060 Type 1 7 1/4 Professional Saw Cat 3064 Type 1 7 1/4 Professional Saw Cat 2683 Type 1 7 1/4 Circular Saw 2684 Type 1 7 1/4 Industrial Saw Cat 2685 Type 1 8 1/4 Industrial Saw Cat 2695 Type 1 8 1/4 Industrial Circular Saw..
  • Compatible with Black-Decker: 2697 Type 1/2 Light Weight Circular Saw 2698 Type 1 Light Weight Circular Saw With Brake 27111 Type 1/2 Circular Saw 3660 Type 2/3 12 Miter Saw 3680 Type 2/3 12 Compound Miter Saw QP350 Type 1 7-1/4 Circular Saw 3057-44 (Type 1) 7 1/4 Sawcat Chili 3064-44 (Type 1) 7 1....
Check Stock

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

LANTRO JS T track Hold Down Clamps,Width Woodworking and Clamps, T Tracks Woodworking, 1Pack

  • Clamp anywhere with a dovetail groove. Featuring new soft-grip handle..
  • Unique clamp shape slides into dovetail wood tracks and grooves for fast and easy clamping.
  • Universally compatible with any 1/2" 14-degree dovetail router bit profile.
  • Eliminate the need for expensive T-tracks and groove your own tracks.
  • Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs.
  • Compatible with 3/4" x 3/4" dog holes for quick hold-downs.
  • Note: Dovetail Router Bit is not included..
Check Stock

High Speed Large Table Saw Take 4

  • This table saw switch replacement for ryobi craftsman table saw - 10 inch table saw parts..
  • 2 position, 4 poles switch, with a removable safety table saw key to lock the power switch prevents accidental operations..
  • Easy to install and give you quickly on/off and reverse..
  • Amperage: 12 Amps at 250V, 20 Amps at 125V..
  • This table saw switch is made of high-quality durable plastic, solid to use..
Check Stock