Top Table Saw Fences

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • ... full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simply be flipped it up and out of your way when not in use..
  • The Fulton Aluminum Miter Fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. On the back, there is an offset track for mounting the fence to a miter gauge..
  • The fence can be mounted to low profile miter gauges or standard profile miter gauges simply by fl....
Check Stock

MATCHFIT Dovetail Clamp Pro & ZEROPLAY Miter Bars by MICROJIG Double Pack

  • Product 1: Revolutionary all-in-one MATCHFIT Package.
  • Product 1: You can route your own tracks to build versatile jigs, fixtures, and hold-downs.
  • Product 1: Dovetail Clamps and hardware move through the dovetail grooves below the surface of the material.
  • Product 1: Create your own Adjustable fences, stops, and sleds.
Check Stock

The End: Fuck Christmas

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Bosch Parts 2608040070 Rotary Handle

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

BOSCH CM10GD Compact Miter Saw - 15 Amp Corded 10 In. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade & 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

  • Product 1: ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment.
  • Product 1: CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup..
  • Product 1: CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch.
  • Product 1: COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do..
  • Product 2: Powerful table saw has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross cutting of fine and rough materials.
Check Stock

Bosch Js365 Jigsaw Top Hndl 6.5A

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V/250V

  • 【 TABLE SAW SWITCH】: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. The product is not sponsored or endorsed by Ryobi..
  • 【VOLTAGE】: Emergency stop switch replaces part #: 16102010G, 889110109712 ,452080007 , 984407003 and 984406001..
  • 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market..
  • 【 COMPATIBLE WITH】: Table saw switch is compatible with Ryobi BS1001SV 10" Band Saw, BS902 9" Band Saw, BS903 9" Band Saw,BTS15 10" Table Saw, BTS20 10" Portable Table Saw, BTS20R 10" Table Saw, BTS20R-1 10" Table Saw, BTS21 10" Table Saw.
  • 【 COMPATIBLE WITH】: Compatible with DP120 12" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10" Table Saw, RTS30 10" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10" Table Saw, BTS211 10" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw.
Check Stock

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

  • The Fulton Aluminum Universal Fence Clamps are the perfect solution for clamping auxiliary fences, stop blocks, setup blocks, corner clamps and more to vertical flat surfaces like fences without the clamps getting in the way. The clamp post arm fits into a 3/8” hole and is at a slight inward angle to keep the lower part of your fence or block up against a flat surface. Fitting into a hole on the top of the fence or block keeps the clamp completely out of the way unlike F-clamps or C-Clamps..
  • The versatility of these clamps allows you to use them in most any way imaginable to make your work flow quicker and easier. With these fully adjustable clamps, you can clamp stock pieces as small as ¼” and stock pieces all the way up to 6¼”. This means that you can attach your sub fences and more to most any table saw, router or even a band saw fence. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
  • This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a com....
Check Stock

LANTRO JS T track Hold Down Clamps,Width Woodworking and Clamps, T Tracks Woodworking, 1Pack

  • Clamp anywhere with a dovetail groove. Featuring new soft-grip handle..
  • Unique clamp shape slides into dovetail wood tracks and grooves for fast and easy clamping.
  • Universally compatible with any 1/2" 14-degree dovetail router bit profile.
  • Eliminate the need for expensive T-tracks and groove your own tracks.
  • Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs.
  • Compatible with 3/4" x 3/4" dog holes for quick hold-downs.
  • Note: Dovetail Router Bit is not included..
Check Stock

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
  • Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
  • Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
  • EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
  • INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.
Check Stock

Mini Benchtop Cut-off Saw 45°Miter Precision Cuts Saw Bench Top Metal Wood Cutting Tool Small Table Saw DIY Tool for Cutting Metals, Wood and Plastic

  • ✅【HIGH SPEED TABLE SAW 】: 4 inch mini table saw with stepless speed regulation, 15MM cutting depth, using hexagon bolts to lift the saw table, humanized operation to meet your needs..
  • ✅【WIDE APPLICATION】: The table saw -small portable table saw with 3 saw blades for handmade wooden model Crafts, Metal, Ceramic Tile, Glass Cutting.
  • the saw blade clamp has 24mm diameter. The precision of small cutting machinegreatly enhanced.
  • Using fine-toothed material of the pulley..
  • ✅【 GOOD MOTOR】:This mini craft table saw's motor power is powerful, low noise, four rubber shock pads, non-slip and shock absorption at work..
  • ✅【PRECISION CUTTING】: mini portable table saw is equipped with miter gauge on the desktop with laser scaled plate, pecisely cutting will be easier..
  • You could not miss this mini table saw for crafts,you could DIY at home ,anywhere you like with this table saws..
Check Stock

22-540 22-560 22-580 34-080 36-610 TP400LS TS300 1400 PC305TP Carbon Brushes Compatible with Delta & Porter Cable Planer 2Pcs

  • Compatible with Porter Cable 1400 Type 1 14 inch Abrasive Cut Off Machine 1400 Type 2 14 inch Abrasive Cut Off Machine 1400 Type 3 14 inch Abrasive Cut Off Machine PC305TP Type 1 12 inch Planer.
  • Compatible with Delta 22-540 Type 1 12 inch Planer 22-540 Type 2 Planer 22-560 Type 1 Planer 22-560 Type 2 Planer 22-565 Type 1 Planer 22-580 Type 1 Planer.
  • Compatible with Delta 20-150 Type 1 Cut Off Saw TS300 Type 1 Bench Table Saw 34-670 Type 2 10 Inch Table Saw 34-670 Type 1 10 Inch Table Saw TP305 12-1/2" Portable Planer 34-080 Type 1 10" Miter Saw 34-080 Type 2 10" Miter Saw.
  • Compatible with Delta 36-600 Type 1 Table Saw 36-600 Type 2 Table Saw 36-610 Type 2 Table Saw 36-610 Type 1 Table Saw TP400LS Type 1 12-1/2" Planer TP300 Type 1 Plane.
Check Stock