Top Taper Chuck - BuyWiseBest.com

NSKI Dental High Speed Cutting Polishing Lathe Motor Drilling Machine 2,800RPM Without Cutting Head

Two speed 1,725 & 3,450 RPM,1/3 HP Motor.
Quick-change chuck is easily mounted on right side.
Standard dental taper shafts with chuck removers will accommodate all types of chucks.
Industrial grade, sealed ball bearings never need lubrication.

Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.

Includes the 1/2" Keyless Drill Chuck and #2 Morse Taper Arbor.
This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.

Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting.
18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis.
Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more.
Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print.
Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.

Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting.
18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis.
Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more.
Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print.
Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an....

Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.

2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".

Infinitely Variable Speed: The mini metal lathe is driven by DC motor with Power: 750W. Variable Speed(Rpm): 50-2250±10%. Taper in Spindle Nose: MT5. LED screen shows you the clear and accurate speed for accurate working. Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Operate either manually or with the adjustable auto feed rate..
750 mm Large Swing Range: The bench top lathe brings a 3-jaw Chuck with Diameter: 4.9"/125 mm. Swing Over Bed: 8.7"/220 mm and Swing Over Cross Slide: 29.5"/750 mm offers more possibilities for large size or/and heavy workpieces. Taper in Spindle Nose: MT5. Range of Imperial Threads: 8-44 T.P.I..
Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. Heat hardening lead screw..
Supportive & Protective: Steady rest works as an end support, ensuring chatter-free operation. Follow rest is used for turning operations on long, slender workpices. Backsplash guard included..
Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle, and rotate clockwise to advance....

Digital Display ----- This miniature lathe includes a digital screen clearly showing the rotational speed, ensuring precise and smooth operation. This lathe has an MT#2 taper and all the adjustment capability you need to work safely and accurately..
High-Precision Three-Jaw Chuck ----- Ideal for professionals, this mini metal lathe is equipped with a high-precision chuck with 3 jaws able to handle both square and round objects with ease. The adjustment dials on the saddle, tailstock, and center let you work with exact accuracy and precision..
Large Swing Range ----- This lathe has a swing over bed of 8.7″ (220 mm) and a swing over cross slide of 29.5″ (750 mm), so you can handle larger projects. The lathe's adjustable 4-way tool post allows you to easily change your cutting tools and angles, permitting easy bevelling..
Metal Gear Set ----- Especially suitable for threading, this wear-resistant and durable set of metal gears provides strong and efficient power transmission to the lathe..
Wide Applications ----- This machine includes a large through-hole shaft to avoid inconvenience while working long pieces. This mini metal lathe is suitable for many processing tasks including turning, drilling, threading and cutting..